Which engine oil is suitable for the Teana?

2 Answers
StHeidi
09/01/25 5:02am
The Teana generally uses 5W-30 engine oil. If it is in an extremely cold or hot environment, then 0W-40 engine oil is recommended. Here are more details about the Teana: 1. The 5W-30 engine oil: 'W' stands for 'Winter' for winter use. The '5' before the 'W' represents the viscosity at low temperatures. The smaller the number, the better the fluidity at low temperatures and the stronger the cold resistance. '30' refers to the viscosity at 100 degrees Celsius. The larger the number, the higher the viscosity and the stronger the high-temperature resistance. 2. Engine oil, also known as motor lubricant, is composed of base oil and additives. The base oil is the main component of the lubricant, determining its basic properties. Additives can compensate for and improve the shortcomings of the base oil's performance.
Was this review help?
10
3
Share
KeeganFitz
09/13/25 7:49am
I've driven the Teana for several years myself, and generally recommend using 5W-30 full synthetic oil. The manual basically specifies this viscosity because the engine is designed to perform best at common temperatures. It starts quickly in cold winters and provides good high-temperature protection in summer. I've used Mobil or Shell brands and found their quality stable. Remember to check certifications - SP grade is the best. Pay attention to the oil condition during regular driving, checking the dipstick color every 5,000 km. Don't let the oil turn black or become too viscous, as this can extend engine life and avoid major repair issues. After an oil change, the engine runs smoother and fuel consumption decreases slightly. If you have aggressive driving habits, change the oil earlier, but always prioritize the manual over personal feelings. Just buy from reputable shops.
Was this review help?
13
3
Share
Expand All
More Forum Discussions

What to Do If the Car Wheel Hub is Scratched?

Solutions for scratched car wheel hubs: 1. Inspect the scratch. If it hasn't reached the inner side of the hub, it can be easily repaired. Use paint thinner to clean around the scratch and remove dirt; 2. For deep scratches where dirt is hard to remove, use a toothpick to thoroughly clean it; 3. To avoid accidentally painting unaffected areas, carefully apply masking tape around the scratch; 4. Shape the brush tip and apply touch-up paint. The paint will shrink slightly as it dries, so apply it slightly raised; 5. It takes about a week for the paint to fully dry. After drying, use waterproof paper soaked in soapy water to smooth the surface; 6. After wiping with waterproof paper, use a compound to restore shine, then apply wax.
12
5
Share

What is the Difference Between a 2-Box Car and a 3-Box Car?

The differences between a 2-box car and a 3-box car are: 1. Different structures: A 2-box car divides the vehicle into two parts, the engine compartment and the passenger compartment; a 3-box car divides the vehicle into three parts, namely the engine compartment, the passenger compartment, and the luggage compartment. 2. Different flexibility: A 2-box car has less weight behind the rear wheels, resulting in smaller dynamic inertia at the rear and more responsive turning, making it more flexible; a 3-box car has a longer rear end, which is heavier, resulting in poorer flexibility. Family cars can be divided into 3-box cars, 2-box cars, and single-box cars. Overall, 3-box cars are more stately and stable, while 2-box cars are more stylish and attractive. The interior space of a car is divided into separate, enclosed spaces based on different functions, and these spaces are referred to as the car's boxes or compartments.
20
0
Share

What are the methods to determine abnormal noise from engine belts?

Methods to determine abnormal noise from engine belts: You can identify which belt is causing the issue by listening to the sound. If the noise occurs when the air conditioning is turned on, it might be the air conditioning compressor belt. If the noise appears during a cold start, it could be the engine belt, and you can check them one by one. If there are multiple belts in the car and you can't pinpoint which one is problematic, you can start the car and pour a little water on the belts. If the noise disappears, it indicates that the specific belt is the issue, and you can then check whether it's loose or of poor quality. Pouring water on the engine belt to stop the noise increases its stickiness temporarily, but the belt will return to its original state once the water dries.
19
0
Share

Can Motorcycles Use Car Engine Oil?

Motorcycles cannot use car engine oil because the engine structures of cars and motorcycles are completely different. Motorcycles primarily use oil to lubricate the engine and clutch, while cars use lubricants for cooling effects. The temperature differences between the two are significant, so it is not recommended to mix or interchange oils. Motorcycle engines operate at much higher speeds, with rated speeds around 8,000 to 11,000 RPM, which is considerably higher than those of car engines. Additionally, most motorcycle engines are air-cooled, with smaller engine sizes and less oil volume, resulting in relatively poorer cooling performance compared to cars. Car engines, on the other hand, are water-cooled, with larger engine sizes and more oil volume, offering better cooling efficiency. As a result, motorcycle engine oil temperatures are much higher than those of car engine oils, necessitating motorcycle oils to have excellent high-temperature resistance and thermal oxidation stability.
20
1
Share

How to Adjust the Date on a Car-Mounted Dash Cam?

Method to adjust the date on a car-mounted dash cam: Press the menu button on the dash cam panel to enter the settings, then select the time setting to freely adjust the time. The dash cam, also known as a car black box, can record images, sounds, and other related information during driving. After installing a dash cam, it can record the entire driving process's video and audio, providing evidence for traffic accidents. In addition to recording driving footage, the dash cam can also function as a radar detector for speed measurement and use online maps. However, it does not have built-in memory and mainly relies on memory cards or mobile digital hard drives for video storage, so it records in a loop and automatically overwrites old footage.
10
3
Share

What does seat heating hilo mean?

Seat heating hilo meaning: The 'hi' in seat heating is an abbreviation for 'high', indicating the high heating setting; 'lo' is an abbreviation for 'low', indicating the low heating setting. Basic structure of the seat heater: The lower layer is non-woven fabric, with heating wires fixed to the non-woven fabric using adhesive tape, covered with knitted fabric stitched over the adhesive tape to form a shape similar to the heated area of the seat, and then sewn into the seat cover. To enhance passenger comfort and control the seat heating temperature within a certain range, two temperature controllers are installed in the seat heating pad: the backrest heater is connected to the seat cushion heater power supply via connectors, and the seat cushion heater power supply is connected to the dashboard wiring harness via connectors, then through the seat heating switch, fuse, and ignition switch to the battery power supply.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.