Which engine is used in the Changan Ruicheng CC?

1 Answers
EmeryMarie
07/29/25 8:02pm
Changan Ruicheng CC is equipped with two types of engines: a low-power version 1.5L turbocharged engine and a high-power version 1.5L turbocharged engine. Here is some related information about engine exhaust: Methods to deal with excessive exhaust: If the exhaust is abnormally excessive, the solution is to go to a repair shop for inspection and maintenance. Car owners should promptly visit a repair shop for inspection to prevent more serious faults. Common causes of exhaust formation: Improper adjustment of the fuel injection timing. If the fuel injection timing is too late, the fuel cannot be completely burned, resulting in a large amount of black smoke being emitted. Excessive clearance between the cylinder and piston allows too much engine oil to enter the cylinder. During splash lubrication, a large amount of engine oil enters the cylinder. High-temperature gas in the cylinder enters the oil pan, contaminating and thinning the engine oil, which affects lubrication and produces exhaust. If the piston rings or cylinder liner are severely worn, the seal between the piston and cylinder liner becomes loose, ultimately leading to severe exhaust from the side breather of the car, insufficient power in the diesel engine, and possibly blue smoke.
Was this review help?
7
4
Share
More Forum Discussions

Can I still take the driving test if I lost my ID card?

You can still take the driving test if you lost your ID card. Bring your household registration booklet and the receipt for ID card collection to apply for a temporary ID card at your registered residence. After losing your ID card, immediately report the loss of various cards. If you don't remember the card number and password, you can contact customer service to report the loss by providing your ID number. Below is an introduction to the driving test: Subject 1: Road traffic safety laws, regulations, and related knowledge test. The structure of the test question bank and the basic question types are determined by the Ministry of Public Security, and provincial traffic management departments under the public security authorities establish the test question bank for their respective provinces (autonomous regions, municipalities) based on local conditions. Subject 2: Field driving skills test. The test items include reversing into a parking space, stopping and starting on a slope, turning at a right angle, driving along a curve, and parallel parking. In cities like Shanghai, Subject 2 consists of nine required test items: reversing into a parking space, turning at a right angle, parallel parking, driving through a tunnel, stopping to take a card, driving along a curve, making a U-turn on a narrow road, emergency stopping, and stopping and starting on a slope. Subject 3: Road driving skills test. The basic test items include preparation before driving (walking around the vehicle counterclockwise, fastening the seat belt, turning on the left turn signal, shifting gears and releasing the handbrake, honking the horn), starting, driving straight, changing lanes, passing through intersections, pulling over to stop, passing through pedestrian crossings, passing through school zones, passing through bus stops, meeting other vehicles, overtaking, making a U-turn, and driving at night. Subject 4: Safe and civilized driving knowledge. The test item is related knowledge of safe and civilized driving.
17
0
Share

What is the lifespan and mileage of Michelin tires?

Michelin tires can last about 3 years and run approximately 50,000 kilometers. This is just a general reference period, as some car owners may find their tires worn out after only 30,000 kilometers, while others might use them for up to 10 years. The lifespan or mileage of Michelin tires is influenced by many factors. The mileage of Michelin tires is affected by the following factors: Working air pressure: Both underinflation and overinflation can impact the lifespan of the tires. If the tire pressure is too low, the radial deformation increases, causing excessive deformation on both sides of the tire wall, leading to shoulder wear on the tread. This raises the tire temperature, significantly shortening the tire's lifespan. Climate environment: The local climate in different regions affects the rate of rubber aging in tires. Aged tires lose their elasticity, and continued use can cause tread deformation, increasing the risk of blowouts and reducing braking effectiveness. Tire temperature: During driving, the tire temperature rises due to stretching, compression, and friction. Excessive temperature can accelerate tire wear and even cause blowouts. Driving habits: This is a factor directly related to the car owner. Aggressive acceleration, sudden turns, emergency braking, high-speed driving on rough roads, frequently driving over curbs, and scraping obstacles when parking can all cause severe tire wear, thereby shortening the tire's lifespan.
14
1
Share

What speed corresponds to which gear in Subject 3?

Subject 3 gear and speed standards mainly include: 1st gear for 0-20 km/h, 2nd gear for 5-30 km/h, 3rd gear for 15-40 km/h, 4th gear for 30-55 km/h. The highest gear required in Subject 3 is 4th gear, which is used during straight-line driving. The specific speed requirements for gear shifting in Subject 3 are as follows: Introduction 1: During normal driving, 1st gear corresponds to 10-20 km/h, 2nd gear to 20-30 km/h, 3rd gear to 30-40 km/h, 4th gear to 40-50 km/h, and 5th gear to speeds above 60 km/h. Introduction 2: However, the speed and gear matching requirements for the Subject 3 exam differ slightly from actual driving. The allowed range for 1st gear is 0-20 km/h, with the shift to 2nd gear occurring at 15-20 km/h. The allowed range for 2nd gear is 10-30 km/h, with the shift to 3rd gear at 25-30 km/h. The allowed range for 3rd gear is 20-40 km/h, with the shift to 4th gear at 35-40 km/h. The allowed range for 4th gear is 30-50 km/h, with the shift to 5th gear at 45-50 km/h.
18
0
Share

What are the deduction rules for the right-angle turn in Subject 2?

The deduction rules for the right-angle turn in Subject 2 mainly include: driving wheels over the road edge line, which results in a 100-point deduction; failing to use or incorrectly using the turn signal during the turn, which results in a 10-point deduction; not turning off the turn signal after the turn, which results in a 10-point deduction; and stopping midway, which results in a 5-point deduction each time. The key deduction points for the right-angle turn in Subject 2 are as follows: Running over the line: Failing to adjust the distance between the car body and the right-side edge line to 30 centimeters, which makes it easier to run over the line during the turn. When the highest point of the windshield wiper aligns with the edge line, the distance between the car body and the edge line is 30 centimeters. Driving too fast: The right-angle turn should be performed at a low speed. If the speed is too high and the steering is not timely, it can lead to running over the line. Lights: Forgetting to turn on the turn signal or not turning it off in time after passing the curve. This is also a common deduction point in the right-angle turn. The left turn signal needs to be turned on during the right-angle turn and turned off upon hearing the voice prompt. Many trainees tend to mistakenly switch the turn signal to the right turn signal when turning it off, which also results in a deduction.
5
0
Share

Will the make-up exam fee be refunded if the Subject 3 test is canceled?

If the Subject 3 test is canceled, the make-up exam fee will generally be refunded to the account balance. If a cash refund is required, you need to bring your ID card to the vehicle management office to complete the cancellation procedure. It's important to note that the cancellation request must be submitted at least one day before the exam date. Canceling on the exam day or being absent will be treated as a failure, and the exam fee will not be refunded. Below is an introduction to the driving test subjects: Subject 1: A test on road traffic safety laws, regulations, and related knowledge. The structure and basic question types of the exam question bank are determined by the Ministry of Public Security, while provincial traffic management departments establish their own question banks based on local conditions. Subject 2: A test on field driving skills, including reverse parking, hill start, right-angle turns, curve driving, and parallel parking. In cities like Shanghai, Subject 2 consists of nine mandatory items: reverse parking, right-angle turns, parallel parking, tunnel driving, parking for toll collection, curve driving, narrow-road U-turns, emergency stops, and hill starts. Subject 3: A test on road driving skills, including basic items such as pre-driving checks (walking around the vehicle counterclockwise, fastening the seatbelt, turning on the left turn signal, shifting gears, releasing the handbrake, and honking), starting, driving straight, changing lanes, passing intersections, pulling over, crossing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and night driving. Subject 4: A test on safe and civilized driving knowledge, covering related concepts.
20
2
Share

Does running a car out of fuel and stalling have any impact on the vehicle?

Running a car out of fuel and stalling can have certain impacts on the vehicle. The fuel pump generates heat during operation, and without gasoline to immerse and cool it, this can affect the pump's lifespan. Additionally, running until the fuel is completely depleted and the engine stalls can make restarting the car more difficult. It is best to refuel as soon as the fuel gauge warning light comes on. Here are some considerations for refueling a car: Fuel cap location: Knowing the location of the fuel cap is essential. Some drivers (especially new drivers) may not be familiar with the fuel cap location and may need to reposition the car after some confusion. Gasoline grade: There are several types of gasoline, each with different component ratios, leading to varying performance. Always check the gasoline grade before refueling. Mixing gasoline: Some vehicles have higher requirements for gasoline. Mixing different grades may not have a significant short-term impact, but lower-grade gasoline may have higher knock tendencies, with minimal other effects. Overfilling after the pump clicks: At gas stations, attendants often try to round up the total charge by adding a bit more fuel after the pump clicks. However, in summer, fuel expands due to heat, which can damage the fuel tank. Fuel additives: Gas station attendants may recommend fuel additives. However, fuel additives cannot fundamentally solve engine carbon buildup issues, so it's best to avoid using them.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.