Which engine is used in the BAIC Senova X35?

What does it mean when BMW's position lights are on?

If the headlight switch of a BMW is set to the position light position, the position lights will definitely stay on. At night, as long as the headlights are turned on, the position lights will illuminate to alert vehicles and pedestrians ahead and behind. Position lights are one of the commonly used lights on a car, mainly installed to indicate the width of the vehicle. Generally, these lights are used when driving in the evening to make the car visible to other vehicles and prevent accidental collisions. Here are some tips for night driving: 1. Yield to pedestrians: Under most nighttime conditions, there is insufficient light and limited visibility. When passing through intersections, residential areas, etc., it is necessary to slow down and yield to pedestrians. 2. Maintain a safe distance: When following another vehicle at night, keep a distance of at least 50 meters to enhance safe driving. 3. Pay attention to switching between high and low beams: When driving in areas with poor visibility, turn on the high beams. If there is an oncoming vehicle in the opposite lane, switch to low beams, reduce speed, and ensure safe passing.

2

1

Share

Is Porsche DCT the Same as PDK?

PDK belongs to DCT, where DCT stands for Dual-Clutch Transmission, and PDK is a type of dual-clutch transmission. The PDK transmission was jointly developed by Porsche and ZF Friedrichshafen AG in Germany. Dual-clutch transmission is a relatively common type of automatic transmission, which is developed based on manual transmission. Relevant information about the transmission is as follows: 1. Introduction: A device that changes the speed ratio and direction of motion. It is used to alter the torque, speed, and direction of motion transmitted from the driving shaft to the driven shaft under different working conditions. Gear-driven transmissions generally consist of a housing and several gear pairs. 2. Function: During driving, to adapt to different working conditions, the driving force and speed of the car need to vary within a certain range. However, the existing engine's torque and speed variation range cannot meet this requirement, hence the transmission is installed.

8

0

Share

Do I still need to apply film on double silver coated glass?

Double silver coated glass still requires film application. Even though the car window glass itself is tempered glass, it cannot offer comprehensive functionality. To achieve a comfortable interior environment and maintain the vehicle, applying film is necessary. Glass film: Also known as solar film, it is a type of glass covering material designed to enhance and improve the thermal, optical, and physical properties of glass during use. Main purposes of solar film: First, heat insulation; second, explosion-proof. Initially, to block intense sunlight and reduce the invasion of solar heat into the car interior, early sun paper was developed, now commonly referred to as tinted paper. However, this type of film basically does not provide heat insulation and is only used for shading, which can be considered the first-generation product of solar film. After several updates and iterations, it has evolved into today's ceramic film.

20

1

Share

What Causes Engine Screws to Rust?

Engine screws rusting is a very normal occurrence, unless they are titanium screws, but engines definitely do not use titanium screws. If steel or copper screws are used, they will also rust, especially in humid environments where rusting occurs even faster. Rust Prevention Measures: Vehicle screws are actually treated with rust prevention methods when they leave the factory. After exposure to oxidation in most environments, some mild rusting occurs. If the rusting is severe, the screws can be replaced. If the rusting is not too severe, it will not affect the driving safety of the car. There are specialized rust removers that can easily clean off the rust stains. Maintenance Tips: Regular maintenance and timely cleaning of the car engine are essential. Cleaning off dust and surface water accumulation can effectively prevent screws from rusting and aging. The engine environment is particularly harsh and must endure cold or humid weather, with many components being exposed. Regular maintenance can also effectively address these issues.

5

Share

Which year is the Porsche 991.2 model from?

Porsche 991 is the new generation 911 officially released at the 2011 Guangdong Porsche Auto Show, with the internal code name 991. Porsche 991 is the seventh generation of the 911 series. The 911 models of the Porsche 991 generation began transitioning to the 992 era from 2018. However, it wasn't until the end of 2019 that the 911-Type of the 991 generation was truly discontinued. Relevant information about Porsche is as follows: 1. Introduction: Porsche, a world-renowned luxury car brand under the German Volkswagen Group, also translated as "Porsche," is headquartered in Stuttgart, Germany, and is one of the main representatives of European and American automobiles. Main models include the 911, 718, Boxster, Cayman, Panamera, Cayenne, and Macan. 2. Logo Meaning: The English logo of Porsche uses the surname of Ferdinand Porsche, the founder of the German Porsche company. The graphic logo adopts the shield-shaped city emblem of Stuttgart, where the company is located. The word "PORSCHE" is at the top of the logo, indicating that the logo is owned by Porsche Design Company. The word "STUTTGART" is placed above the horse in the logo.

9

4

Share

What is the Porsche ABS/PSM malfunction?

Porsche PSM malfunction refers to a fault in the Porsche Stability Management (PSM) system. This system utilizes multiple sensors to monitor real-time data such as driving direction, speed, yaw rate, and lateral acceleration, then calculates the vehicle's actual driving direction accordingly. A constantly illuminated ABS light indicates an alert in the Anti-lock Braking System. More details about ABS are as follows: 1. ABS light briefly illuminates for a few seconds when starting the vehicle: The light turns on when the ignition is switched on or the engine is started, as the system undergoes an automatic self-check. The light will turn off once the check is completed. 2. ABS activates when the brake pedal is rapidly pressed to the floor: During emergency braking situations, the Anti-lock Braking System prevents wheel lock-up, thereby improving safety during sudden braking. 3. ABS malfunction light remains constantly illuminated: If the vehicle can still rely on conventional braking while driving, but the ABS warning light stays on, it indicates a fault in the ABS system. Professional diagnosis using specialized equipment is recommended to determine whether the issue lies with the tone wheel, sensors, wiring, or other components.

5

3

Share

Which engine is used in the BAIC Senova X35?

What does it mean when BMW's position lights are on?

Is Porsche DCT the Same as PDK?

Do I still need to apply film on double silver coated glass?

What Causes Engine Screws to Rust?

Which year is the Porsche 991.2 model from?

What is the Porsche ABS/PSM malfunction?

Are out-of-town vehicles subject to traffic restrictions in Henan?

How Much Should the Steering Wheel Be Turned When Changing Lanes?

How Many Points Are Deducted for Wrong-Way Driving?

Does the Transmission Need to Be Disassembled to Replace the Oil Seal?