Which engine does Changan Automobile use?

1 Answers
OJesse
07/29/25 6:36pm
Changan Automobile uses self-developed engines. Here is more information: 1. In the early stage, the H-series engines were mainly used. The H-series engines are inline 4-cylinder, 16-valve, all-aluminum engines, which are the latest achievements of Changan Automobile's independent research and development by integrating international advanced technologies. They have complete independent intellectual property rights and embody Changan Automobile's outstanding performance in energy saving, power, environmental protection, safety, and comfort. The H-series engines were planned to be installed in Changan's self-branded sedan main models, put into production in 2010, and can meet the automotive market needs from 2010 to 2025. This series of engines has outstanding advantages such as "high power, high torque, low emissions, and low fuel consumption". 2. The Jiangling brand engines produced by Jiangling Machinery Factory under Changan Group are also one of the engines used by Changan Automobile.
Was this review help?
10
1
Share
More Forum Discussions

What is the ground clearance of the CT6?

The ground clearance of the Cadillac CT6 is 15cm, which ensures good comfort and handling. Here are some details about this car: 1. Powertrain. It is equipped with a 2.0T inline 4-cylinder turbocharged engine, with a maximum horsepower of 237ps, a maximum torque of 350nm, a maximum power of 174kw, and is paired with a 10-speed automatic transmission. 2. Body dimensions. The Cadillac CT6 is a sedan with body dimensions of 5179mm in length, 1879mm in width, 1500mm in height, a wheelbase of 3109mm, a minimum ground clearance of 162mm, and a body weight of 2000kg.
18
0
Share

Where is the Changan Automobile Factory located?

Changan Automobile Factory is located in Beijing. Taking the 2021 Great Wall CS75 as an example, its body dimensions are: length 4650mm, width 1850mm, height 1715mm, with a wheelbase of 2700mm, a fuel tank capacity of 58 liters, a luggage compartment volume of 520 liters, and a body weight of 1600kg. The 2021 Great Wall CS75 features a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 178PS, maximum power of 131kW, and maximum torque of 265Nm, paired with a 6-speed manual transmission.
13
1
Share

How to Remove the Wing Mirror on a Ford Kuga?

The method for removing the wing mirror on a Ford Kuga mainly involves the following steps: 1. Pinch the cylindrical part behind the mirror. 2. Rotate it counterclockwise by 45 degrees to remove it. 3. For installation, rotate it clockwise by 90 degrees and follow the reverse steps. Additional information: Car wing mirrors are located on both sides of the front of the vehicle, as well as inside the car at the front. They reflect the situation behind, beside, and below the car, allowing the driver to indirectly see these areas, thereby expanding the driver's field of vision. The car wing mirror is an important safety component, and its mirror surface, shape, and operation are carefully designed.
19
4
Share

How to Turn Off AC When Defrosting the Windshield?

Press the recirculation button 5 times consecutively to turn it off. Below are specific details about A/C: 1. Introduction: A/C stands for Air-conditioning, which is the abbreviation for air conditioning device. Pressing the A/C button activates the air conditioning to adjust the temperature according to the set value. At this time, the air conditioning compressor starts, increasing the engine load and fuel consumption. 2. Notes: The A/C switch should only be used when turning on the air conditioning in summer. It is not used when turning on the air conditioning in winter. If this button is pressed in winter, the warm air from the air conditioning will not only be ineffective but also increase the engine load, resulting in wasted effort.
12
0
Share

What is the maintenance interval for the Roewe RX5?

The maintenance interval for the Roewe RX5 is 3,000 kilometers. Maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, and replacing certain parts of the car, also known as car servicing. Its purpose is to keep the car clean, maintain normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life. Taking the 2020 Roewe RX5 as an example, its body dimensions are: length 4556mm, width 1855mm, height 1719mm, wheelbase 2700mm, fuel tank capacity 55 liters, trunk capacity 595 liters, and curb weight 1506kg.
15
0
Share

Should the Foot Be on the Accelerator or Brake When Driving?

From a professional driving perspective, both the accelerator and brake must be controlled by one foot. The relevant explanations are as follows: 1. Reason: Controlling both the accelerator and brake with one foot means that when the brake is pressed, the accelerator must be released, and when the accelerator is pressed, the brake won't be engaged. 2. Comparison: For manual transmission vehicles, the far left is the clutch, the middle is the brake, and the far right is the accelerator. For automatic transmission vehicles, the left is the brake and the right is the accelerator. Moreover, in automatic cars, only one foot (typically the right foot) is used for control. It is prohibited to use the left foot for the brake and the right foot for the accelerator.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.