Which direction to turn the steering wheel for parallel parking?

1 Answers
LeFernando
07/29/25 12:50pm
Parallel parking requires turning the steering wheel to the right. Parallel parking is a reverse parking maneuver where the vehicle starts in front of the parking space and must complete the parking in one continuous motion without stopping. The wheels must not touch the lane boundary lines, and the vehicle body must not contact the parking space boundary lines. Before exiting the parking space, the left turn signal must be activated, and during the exit, the wheels must not touch the lane boundary lines, nor should the vehicle body contact the parking space boundary lines. Below is an introduction to the driving test subjects: 1. Subject 1: Also known as the theoretical test or driver's theory test, it is part of the motor vehicle driver's license examination. 2. Subject 2: Also known as the small road test, it includes five test items: reverse parking, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving. 3. Subject 3: Also known as the big road test, it is the road driving skills test in the motor vehicle driver's examination. 4. Subject 4: Also known as the theoretical test or driver's theory test.
Was this review help?
7
3
Share
More Forum Discussions

At what percentage of remaining engine oil life should it be replaced?

Engine oil should be replaced when its remaining life is below 20%. Precautions for selecting engine oil: Criteria for selecting engine oil: Choose oil that matches your engine model, preferably multi-grade oil. Multi-grade oil offers advantages such as fuel efficiency, long service life, and high performance, providing excellent protection for the engine. Select oil according to your engine's requirements. Avoid using higher-grade oil in lower-performance engines or lower-grade oil in high-performance engines. Oil level should be below the dipstick mark: The oil level should be slightly below the mark on the car's dipstick. Do not overfill. Choose oil with different viscosity based on your vehicle's engine operating conditions. Do not mix different engine oils: If switching from premium to regular oil, first drain the existing oil completely and clean the lubrication system thoroughly. Never mix different types of oil.
15
1
Share

How to Check a Car's Make and Model?

You can directly use the car's VIN code to check. Every car has a VIN code, which is equivalent to the car's ID number. This number is unique and cannot be tampered with. The car's VIN code contains a lot of information, such as the manufacturer, body type, engine type, production location, and manufacturing date. If car owners want to check the make and model of their car, they can use the car's VIN code to do so. The car's VIN code is usually written on the lower left corner of the front windshield, which car owners can check. The car frame also has a VIN code, but this VIN code is used for tracing purposes. When registering a new car, the frame number and engine number need to be imprinted.
11
2
Share

Will the driver's license expire if I only registered but didn't take the test?

Driver's license will expire if you only registered but didn't take the test. Below are the handling methods for expired driving tests and an introduction to the validity period of driving tests: Handling methods for expired driving tests: The driving school will notify the student to go to the vehicle management office to confirm cancellation or it will be automatically cancelled. The student will receive a text message notification from the vehicle management office or the driving school. At this time, no formalities are required. You can go to the driving school to pay and register for the driving test again when you have time. Validity period of driving tests: It is calculated from the day when you pass subject one. After passing the subject one test, a learning driving certificate will be issued, which is valid for 3 years. You must complete subject two and three tests within the validity period, and there are five test opportunities for subject two/three. If you fail the fifth test or exceed the validity period, all the passed subjects will be invalid, and the student must register and study again.
20
1
Share

What are the practical tips for reverse parking?

Here is a detailed introduction to reverse parking techniques: Taking right-side reverse parking as an example, adjust the rearview mirrors and turn the steering wheel to full lock: After getting into the car, adjust the seat and backrest, then properly adjust the left and right rearview mirrors. Lower the mirrors to the lowest position, ideally to see a bit of the rear wheels. Fasten the seatbelt. First, drive the car to an appropriate position, engage reverse gear, gently lift the clutch, and slowly reverse. When the vehicle reaches the point where the lower edge of the left rearview mirror touches the control line, turn the steering wheel to full lock to the right. Check the rearview mirrors: After turning the steering wheel to full lock to the right, look at the left rearview mirror. When you see the corner of the parking space appear in the left rearview mirror, straighten the steering wheel (if the front left door handle has already crossed the line, do not straighten the wheel and reverse directly into the space). Adjust the steering wheel: After straightening the steering wheel, continue reversing until the front left door handle is over the left parking line, then turn the steering wheel to full lock to the right again. Straighten the car body and stop: When you see the corner of the left baseline of the parking space, straighten the steering wheel. Wait until the car body is vertically aligned and parallel, adjust the car body to reverse into the parking space. After aligning the car body, check the left rearview mirror. When the lower edge of the left rearview mirror shell is over the front line of the parking space, stop the car.
6
0
Share

How to Classify Sedan Levels?

Sedan classification standards are based on wheelbase and engine displacement. Below are the specific introductions to sedan levels: A-segment cars: Also known as compact cars, smaller cars are referred to as subcompact cars, or A0-segment cars, such as the Vios, Fit, and Polo. Some current compact cars have begun to be lengthened, such as the Lavida, Lamando, and Corolla models, with wheelbases approximately between 2.4 to 2.6 meters and displacements mostly around 1.0 to 1.5 liters. B-segment cars: Referred to as midsize cars, models like the Magotan, Passat, Camry, Accord, BMW 3 Series, and Audi A4 have wheelbases around 2.7 to 2.9 meters and displacements around 1.4 to 2.5 liters. C-segment cars: Referred to as executive cars, with wheelbases around 3 meters and displacements around 2.0 to 3.0 liters. The most common C-segment cars are the Audi A6, BMW 5 Series, and Mercedes-Benz E-Class. D-segment cars: Referred to as full-size cars, with wheelbases ranging from 3.1 to 3.6 meters and displacements from 2.0 to 6.6 liters. Representative models include the Mercedes-Benz S-Class, BMW 7 Series, Audi A8, Lexus LS, Bentley, and Rolls-Royce.
17
0
Share

Is an Automatic Transmission a Dual Clutch?

An automatic transmission is a dual clutch. The relevant introduction of the dual clutch is as follows: Meaning of Dual Clutch: The dual clutch, also known as the Dual Clutch Transmission (DCT), differs from the general automatic transmission system. It belongs to both manual transmissions and automatic transmissions. In addition to the operational flexibility of manual transmissions and the comfort of automatic transmissions, it can also provide uninterrupted power output. Advantages of Dual Clutch Transmission: The advantages of the dual clutch transmission are obvious, such as high transmission efficiency, fast gear shifting, low production cost, small space occupation, low fuel consumption, etc. In terms of advantages, it can easily surpass ordinary AT transmissions by several streets.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.