Which country produces the Lynk & Co 03?

What does it mean when the lower edge of the rearview mirror is parallel to the yellow line during reverse parking?

When the lower edge of the rearview mirror is parallel to the yellow line during reverse parking, it means that you should focus on the side of the car body closest to the boundary line. The side of the car body farther from the boundary line will appear parallel to the yellow line when viewed in the rearview mirror. Below are some precautions for reverse parking: 1. Reverse from the left side: Whenever possible, choose to reverse from the left side, as it is easier for the driver to observe. During the reversing process, first look behind, then pay attention to both side rearview mirrors. 2. Observe the rear situation: Before reversing, check the situation behind the car, estimate the reversing route, and determine whether the front of the car will hit any obstacles during reversing. Especially when the steering wheel is turned significantly, the turning radius of the car's steering wheels is larger than that of the rear wheels, and the front of the car will swing outward more during reversing. Be sure to avoid scraping or hitting the front of the car.

5

3

Share

Where is the coolant location in the Magotan?

The coolant in the Magotan is located in a small pink liquid reservoir on the left side of the engine compartment. The filling position is in the middle of the reservoir, marked by two horizontal lines. If the fluid level is below the "MIN" mark, coolant should be added immediately. Coolant replacement method: Before completely replacing the coolant, conduct a thorough inspection to check for any signs of leaks or cracks in the pipes, with a special focus on the five-way hose. The five-way hose gets its name from having five connection interfaces to various parts. The coolant flows through the five-way hose and is then distributed to different parts of the car to function. If there are any signs of coolant leakage in this section, replace the hose or re-secure the interface as needed. Drain the old coolant, then flush the liquid channels with clean water. Add clean water to the coolant reservoir, then continue filling the reservoir with water so that it continuously flows through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water flowing out of the reservoir will have a faint pink tint. Continue adding clean water until clear water flows out. Note: Remember to disconnect the heater hose to drain all water from the heater core. Approximately one hour after draining, add the new coolant through the radiator hose, which allows the coolant to flow quickly into the radiator. Then, add another container of coolant to the reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. During this time, the coolant level will drop slightly as air is purged from the cooling system. Top up the coolant to the "MAX" mark on the reservoir.

13

3

Share

What causes the hissing sound at idle?

The reasons for a hissing sound at idle are as follows: 1. Poor spark plug performance; 2. Vacuum hose leakage; 3. High-voltage wire leakage; 4. PCV valve blockage; 5. Throttle position sensor malfunction; 6. Idle stepper motor failure; 7. Idle control valve malfunction; 8. Abnormal throttle opening; 9. Intake system leakage. The causes of valve leakage include: 1. Wear: The working surfaces of the valve and valve seat wear or corrode, forming spots or depressions with carbon buildup. 2. Poor sealing: Excessive clearance between the valve stem and valve guide causes the valve stem to wobble, preventing proper sealing, or the valve stem bends and deforms, tilting the valve head and resulting in leakage.

14

0

Share

How to Deal with Mice in the Car?

There are several methods to handle mice in the car: 1. Inspect the car interior for any damage, and check if the wiring and pipes in the engine area have been compromised. 2. Take the car to a car wash for a thorough cleaning. 3. If any damage is found, promptly visit a repair shop for maintenance or replacement to avoid unnecessary trouble. Here are several ways to prevent mice in the car: 1. Park the car as far away as possible from areas where mice are active, such as garbage dumps, ditches, or grassy areas. 2. Regularly inspect and clean the car to check for signs of mouse activity and ensure the car remains clean. 3. Examine the integrity of the car's air conditioning and ventilation areas, as mice often enter through these parts. 4. Avoid leaving food residues in the car, frequently open windows for ventilation, and ensure doors and windows are closed when leaving the car. 5. Install an electronic rodent repellent in the car to use ultrasonic waves emitted by the device to deter mice.

7

5

Share

What lights should be used when driving in the same direction at night?

When driving in the same direction at night, you should turn on the low beam headlights. The following are the relevant regulations of the 'Road Traffic Safety Law of the People's Republic of China' regarding the use of lights when driving at night: 1. When meeting a vehicle from the opposite direction on a road without central separation facilities or a center line, you cannot use high beam headlights within 150 meters; 2. When meeting a non-motorized vehicle on a narrow bridge or narrow road without central separation facilities or a center line, you cannot use high beam headlights; 3. When driving at night without street lights, poor illumination, or in conditions of low visibility such as fog, rain, snow, or dust, the following vehicle driving close to the preceding vehicle in the same direction cannot use high beam headlights; 4. When passing through sharp curves, slopes, arch bridges, pedestrian crossings, or intersections without traffic signal control, you should alternately use high and low beam headlights as a signal. 5. Violators of the above regulations will be fined and have points deducted from their license.

18

2

Share

What is Nissan's e-POWER Hybrid System?

Nissan E-POWER is different from traditional hybrid vehicles. It represents a future-oriented powertrain system that enables eco-friendly driving comparable to gasoline-powered cars. How E-POWER Works: E-POWER is classified as a "series hybrid system" powertrain. The vehicle is entirely driven by an electric motor, meaning the engine functions solely to generate electricity that powers the vehicle. Nissan has coined the term "Intelligent Power Generation System" for this technology. This system consists of an internal combustion engine and a generator, where the engine's sole purpose is to generate electricity for powering the motor and charging the battery. Advantages of E-POWER: 1. Full-time electric drive: Equipped with a new-generation electric drive system derived from the Nissan LEAF, delivering peak torque up to 300N·m. 2. High-efficiency power generation: The internal combustion engine operates continuously in its optimal efficiency zone without directly driving the wheels, achieving fuel consumption as low as 3.9L/100km. 3. Instant charge/discharge technology: Features ultra-high-performance lithium batteries with discharge rates 15 times higher than conventional EV batteries. Combined with electric drive and battery management technologies, it enables instantaneous power delivery and rapid energy replenishment to meet sustained acceleration demands.

8

0

Share

Which country produces the Lynk & Co 03?

What does it mean when the lower edge of the rearview mirror is parallel to the yellow line during reverse parking?

Where is the coolant location in the Magotan?

What causes the hissing sound at idle?

How to Deal with Mice in the Car?

What lights should be used when driving in the same direction at night?

What is Nissan's e-POWER Hybrid System?

Is Flooring the Gas Pedal Harmful to the Car?

Are Cars Without Airbags Really Unsafe?

Why doesn't the dash cam turn off after the car is turned off?

What Are the Reasons Why the Other Party Can't Hear You When Making Calls via Car Bluetooth?