Which country produces the Jeep Grand Commander?

1 Answers
VonKate
07/30/25 6:25am
The Grand Commander is a model jointly produced in China by GAC Motor Group and Fiat Chrysler Automobiles (FCA) of Italy. Below are relevant details about the Grand Commander: 1. The interior design adopts a dual-tone beige and black color scheme, featuring a multifunctional three-spoke steering wheel, symmetrical center console, cannon-style instrument cluster, and wing-shaped center console elements. 2. The Jeep Grand Commander has body dimensions of 4873/1892/1738mm with a wheelbase of 2800mm. In terms of powertrain, all variants are equipped with a 2.0T engine paired with a 9AT transmission. The two-wheel-drive models deliver a maximum horsepower of 234PS, while the four-wheel-drive models offer 265PS.
Was this review help?
15
2
Share
More Forum Discussions

Is the Renault Espace an original imported vehicle?

Renault Espace is an original imported vehicle, which is an imported MPV model under the Renault brand. In terms of body dimensions, the Renault Espace measures 4878 mm in length, 1888 mm in width, and 1675 mm in height, with a wheelbase of 2884 mm. For the suspension, the Renault Espace uses a MacPherson independent suspension at the front and a torsion beam non-independent suspension at the rear. In terms of power, the Renault Espace is equipped with a 1.8-liter turbocharged engine across the entire lineup, delivering a maximum power of 165 kW and a maximum torque of 300 Nm. The maximum torque is achieved at 1750 rpm, while the maximum power is reached at 5600 rpm.
16
1
Share

What are the symptoms of a faulty car charcoal canister purge valve?

Symptoms of a faulty car charcoal canister purge valve: 1. Abnormal noises while driving - when the engine is running at non-idle speeds, you may occasionally hear a clicking sound; 2. Jerky acceleration when pressing the gas pedal with noticeable fuel odor inside the car; 3. After starting the engine, the idle speed fluctuates rhythmically between high and low with poor acceleration performance; 4. Engine stalling or difficulty starting; 5. Possible occurrence of so-called "flooded cylinder" condition, resulting in hard starting or weak ignition. The car charcoal canister is designed to absorb fuel vapors from the gas tank. Normally closed, the purge valve opens after engine start to send these vapors into the engine for combustion, which is both environmentally friendly and energy-efficient.
1
3
Share

Does the GAC Trumpchi GS3 come with a sunroof?

GAC Trumpchi GS3 comes with a sunroof. The car sunroof changes the traditional ventilation form, allowing wind to create an airflow that can extract the stale air from the cabin. In terms of exterior design, the GAC Trumpchi GS3 adopts a family-style Lingyun Wing grille similar to the GS4, integrated with stylish headlights, while the front bumper features dynamic design elements on both sides. For the interior, the GAC Trumpchi GS3 features an all-black layout, complemented by a three-spoke multifunction steering wheel, a large-sized central control screen similar to the GS4, and a T-shaped dashboard design wrapped in extensive soft materials.
6
4
Share

What are the consequences of removing the catalytic converter?

The catalytic converter in a car is designed to enhance the purification of vehicle exhaust. If removed, it can have the following effects: 1. Increased vehicle emissions: Without the catalytic converter, the exhaust gases cannot be effectively purified, leading to emissions that exceed standards. 2. Reduced power and increased fuel consumption: Removing the catalytic converter may cause blockages, resulting in decreased engine power and higher fuel consumption. Below is an introduction to the catalytic converter: 1. Function: The catalytic converter, installed in the vehicle's exhaust system, is the most important external purification device. It converts harmful gases such as CO, HC, and NOx from vehicle exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction. 2. Hazards of malfunction: If the mixture is too lean, it can cause ignition difficulties, weak driving, engine backfire, etc. If the mixture is too rich, it can increase fuel consumption, incomplete combustion, and severe carbon buildup in the cylinders and spark plugs. In such cases, the engine warning light should illuminate.
3
3
Share

What's the reason for the ABS system check causing failure to start?

The reasons for the ABS system check causing failure to start: It indicates that the vehicle's anti-lock braking system has malfunctioned and needs to be inspected and repaired at an automotive service center. After repair, the ABS warning will automatically be cleared. Below are the functions of the vehicle ABS system: 1. Anti-lock braking function: When the vehicle speed is reduced to a certain level by braking, the ABS will automatically terminate the anti-lock braking pressure regulation. After this, the braking process of a vehicle equipped with ABS will be the same as that of a conventional braking system, and the wheels will be locked by braking. 2. Automatic diagnostic function: It can monitor the working condition of the system. Once a fault that affects the normal operation of the system is detected, the ABS will automatically shut down, and the ABS warning light will illuminate to alert the driver. The vehicle's braking system can still function like a conventional braking system.
14
1
Share

Why does a car sometimes misfire and sometimes run normally?

Reasons why a car sometimes misfires and sometimes runs normally: 1. Aging of ignition coils and spark plugs causing the ignition system of the cylinder to fail, which can lead to sudden engine stalling in severe cases; 2. Wear and tear of cylinder wires; 3. Clogged fuel injectors or fuel lines; 4. Excessive carbon buildup on spark plugs. Misfiring refers to the sudden loss of a cylinder during engine operation, resulting in severe shaking during acceleration, lack of power, and abnormal noises. Detection method: Disconnect the power supply wires of the ignition coils of each cylinder one by one. If the shaking worsens, it can be confirmed that this cylinder is not the problem; if there is no reaction from the engine after disconnection, it can basically be determined that this cylinder is the issue.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.