Which country produces the BMW 730?

1 Answers
River
07/30/25 4:11am
BMW 730 is produced in Munich, Germany, and is an imported model of BMW. The BMW 730 is the entry-level model of the BMW 7 Series, with dimensions of 5212mm in length, 1902mm in width, and 1478mm in height, and a wheelbase of 3210mm. In terms of power, the car is equipped with a 2.0-liter turbocharged engine, delivering a maximum horsepower of 265, a maximum power of 195kw, and a maximum torque of 400Nm. In terms of assistance and control configurations, the BMW 730 comes standard with driving assistance imaging, cruise control system, driving mode switching, automatic parking, automatic parking system, hill start assist, variable suspension system, and air suspension.
Was this review help?
4
3
Share
More Forum Discussions

What is Running a Red Light?

Running a red light refers to the act of a motor vehicle violating the prohibition of passage during the red light phase at a signal-controlled intersection or road section, crossing the stop line and continuing to drive. This is determined by capturing three photos via electronic cameras: a photo of the vehicle crossing the stop line at the intersection, including the traffic light showing red and the license plate number; a photo of the vehicle completely crossing the stop line, including the traffic light showing red and the license plate number; and a photo showing the vehicle continuing to move, with the traffic light showing red and the license plate number. If these three photos are captured, the vehicle can be determined to have run a red light. According to the "Road Traffic Safety Law," the act of running a red light is clearly defined. Article 26 states that traffic signals consist of red, green, and yellow lights. A red light indicates prohibition of passage, a green light indicates permission to proceed, and a yellow light serves as a warning. A red light is a traffic signal prohibiting passage, and if a vehicle passes through an intersection during a red light, it constitutes the traffic violation of running a red light. Here are some tips to avoid running a red light: Check the arrow light first, then the circular light: Currently, there are two types of traffic lights: arrow traffic lights and circular traffic lights. When arrow lights are present, drivers should first observe the arrow light and then the circular light to avoid running a red light. Note: When encountering a circular red light, right turns are permitted. However, if the right-turn arrow is red, right turns are prohibited, and violating this will be penalized as running a red light. Brake in time: When the red light turns on, ensure the front of the vehicle does not cross the stop line. If the front wheels accidentally cross, and the rear wheels follow, the electronic camera will capture it, resulting in a penalty for running a red light. If the front wheels have just crossed the stop line when the light turns red, the vehicle must wait for the green light before proceeding. Check the countdown of the green light before proceeding: When the green light flashes, if there is a countdown, drivers can judge accordingly. If there is no countdown, and the vehicle is close to the intersection with sufficient speed, it may proceed to avoid running a red light due to untimely braking. If the speed is slow and the vehicle is far from the intersection, brake immediately to avoid running a red light. Article 38 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" states the following for motor vehicle and non-motor vehicle traffic signals: When the green light is on, vehicles are permitted to proceed, but turning vehicles must not impede the passage of straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue to proceed. When the red light is on, vehicles are prohibited from proceeding. At intersections without non-motor vehicle or pedestrian crosswalk signals, non-motor vehicles and pedestrians should follow the motor vehicle traffic signals. When the red light is on, right-turning vehicles may proceed if they do not impede the passage of other vehicles or pedestrians. Running a red light is not considered illegal under the following circumstances: Yielding to emergency vehicles: Yielding to ambulances, fire trucks, or other emergency vehicles. If captured by surveillance cameras while yielding, the act of running a red light will not be recorded during manual review. Even if recorded, drivers can apply for reconsideration at the traffic police department. Extreme weather: When visibility is extremely low, and even electronic police cannot clearly see the traffic lights. Photos of violations may be blurry, and accidental red-light running will not be penalized. Emergencies: When transporting a critically ill patient to the hospital, multiple red lights may be run. In such cases, after delivering the patient, the driver can provide proof from the hospital or the rescued individual to the traffic police for verification. If confirmed, the violation records can be cleared. If possible, calling an ambulance is recommended to avoid accidents caused by running red lights. Traffic police direction: During peak hours, traffic police may temporarily direct traffic at key intersections. Drivers should follow the gestures of the traffic police.
14
3
Share

How much engine oil should be added to the Roewe RX5?

Roewe RX5 oil filling is as follows: 1. The 1.5T model requires 5.5L; 2. The 2.0T model requires 6L when drained completely. 3. However, due to wear between the engine gears, it is best to buy a little more for daily top-ups. Here are some relevant details: 1. The Roewe RX5 uses 0W-30 fully synthetic oil. Because the vehicle operates with a turbocharger, the engine runs at high temperatures and speeds, so it has higher requirements for oil lubrication. The oil used must be genuine. If counterfeit or substandard oil is used, it will not only fail to protect the engine, lubricate the gears, and reduce wear, but it may also damage the engine and shorten the vehicle's lifespan. 2. Generally, with fully synthetic oil, maintenance is required once a year or every 10,000 kilometers.
5
1
Share

How to reset the maintenance reminder light on a Ford Escort?

To reset the maintenance reminder light on a Ford Escort, simply power on the vehicle and simultaneously press the 'tripe' button and 'reset' button. The Escort is a compact sedan under the Ford brand, equipped with a 1.5L naturally aspirated engine across all models. Key specifications of the Ford Escort are as follows: 1. Powertrain: The engine delivers a maximum power of 90kW and a peak torque of 152Nm, with maximum power achieved at 6,500 rpm and peak torque at 4,500 rpm. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with either a 6-speed manual transmission or a 6-speed automatic transmission. 2. Suspension: The front suspension employs a MacPherson strut independent setup, while the rear uses a torsion beam non-independent suspension.
10
5
Share

How to Replace the Cabin Air Filter in a Skoda Octavia?

Here is the method for replacing the cabin air filter in an Octavia: 1. Remove the glove box. 2. Unclip the cabin air filter cover. There are 3 clips on the top of the cover; press them downward to release. 3. Install the new filter. Pay attention to the direction of the arrow on the filter and install it accordingly. Here is some related information: The cabin air filter can filter dust from the air and needs to be replaced regularly. Generally, it should be replaced every 7,500 to 10,000 kilometers. It is best to replace the cabin air filter during seasonal changes between summer and winter to ensure clean air inside the car. During routine car maintenance and cleaning, you can also take out the cabin air filter, clean the dust off it, and dry it with a blow dryer.
1
4
Share

Where is the BMW Mini air filter located?

BMW Mini air filter is located under the glove box on the passenger side. Here are some related information: 1. The car air filter is a specialized filter designed for air purification inside the car cabin. It uses high-efficiency adsorption material - activated carbon combined with long-fiber non-woven fabric to form an activated carbon composite filter cloth; compact in structure, it effectively filters smoke odor, pollen, dust, harmful gases, and various odors. 2. The filter can efficiently filter and adsorb particulate impurities, achieving oil filtration and air purification performance, while also effectively removing organic gases such as TVOC, benzene, phenol, ammonia, formaldehyde, xylene, and styrene. It is an ideal material for use as an air filter in various high-end cars, sedans, and commercial vehicles. 3. It filters the air entering the cabin from the outside to improve air cleanliness. The general filtering substances include impurities in the air, such as tiny particles, pollen, bacteria, industrial exhaust, and dust. The air filter's function is to prevent these substances from entering the air conditioning system, thereby protecting the system, providing a good air environment for passengers, safeguarding their health, and preventing window fogging.
15
0
Share

What Causes Abnormal Noise at the Moment of Car Ignition?

This is caused by excessively low engine oil temperature and low ambient temperature. When the oil temperature is too low, the various components inside the engine lack lubrication, leading to increased friction between parts, which results in some abnormal noises. This is a normal phenomenon. Below is relevant information about engine oil: 1. Engine oil is referred to as the lifeblood of the engine. Inside the engine, it not only lubricates but also cleans, seals, cushions, prevents rust, and dissipates heat. Without engine oil, the engine cannot operate properly. 2. During engine operation, the oil forms a thin film on the surfaces of various components, preventing direct contact and friction between them. If components directly contact and rub against each other, it will accelerate engine wear and generate a large amount of heat instantaneously, which is highly detrimental to the engine. 3. Over time, the performance of engine oil degrades, so it needs to be replaced regularly. Prolonged failure to change the oil will increase engine wear. During each oil change, the oil filter should also be replaced. The oil filter is used to clean the oil; without it, the oil will become dirty after some use, affecting the engine's lubrication and heat dissipation.
7
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.