Which country produces Renault?

1 Answers
ChaseRose
07/29/25 11:38am
Renault is produced in France. Renault Automobile Company is a car manufacturing and sales company headquartered in Boulogne, France. The dimensions of the Renault are 4672mm in length, 1843mm in width, and 1684mm in height, with a wheelbase of 2705mm. It can reach a speed of 179km/h and has a fuel tank capacity of 57L. The front suspension of the Renault is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension with electric power steering. The tire specifications are 225/65R17. The Renault is equipped with a 1.8-liter turbocharged engine, which delivers 224 horsepower and a maximum torque of 300 Nm. The engine's maximum power is achieved at 5600 rpm, and the maximum torque is achieved at 1750 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block.
Was this review help?
5
0
Share
More Forum Discussions

What is the comprehensive fuel consumption of the Passat?

The official comprehensive fuel consumption of the Passat Lingyu 1.8t is 9.1-10.3L/100km, while the actual fuel consumption may vary depending on the driver's habits and road conditions. Below is an introduction to the Passat: 1. Overview: The Passat (PASSAT) is a mid-sized sedan designed by Volkswagen AG in Germany. It is classified as a B-segment car in Volkswagen's lineup. Since its debut in 1973, the Volkswagen Passat has set high standards in safety, classic design, and top-tier manufacturing quality, making it a global success with over 30 million units sold. 2. Configuration Parameters: The braking system features front and rear discs, the manufacturer is SAIC Volkswagen, the wheelbase is 2871mm, the vehicle dimensions are 4933mm*1836mm*1469mm, and the trunk capacity is 521 liters.
6
4
Share

How to Solve the Issue of Volkswagen Sunroof Automatically Opening?

The solution to the Volkswagen sunroof automatically opening is to adjust the controller knob located in the front middle part of the sunroof by turning it in the appropriate direction. The functions of the sunroof include: 1. Changing the traditional ventilation method; 2. Preventing exhaust fumes from entering the car; 3. Reducing wind noise; 4. Quickly lowering the temperature inside the car; 5. Rapidly removing fog inside the car; 6. Expanding the field of vision. Sunroof maintenance methods: 1. Regularly clean the mechanical parts of the sunroof with oil or lubricant; 2. Regularly clean around the sliding rails to avoid sand particle accumulation and extend the service life of the sunroof sealing ring; 3. Before opening the sunroof, check for obstacles on the roof that may hinder the movement of the glass panel. Precautions for using the sunroof: 1. During car washing, avoid directing the high-pressure water jet at the sealing ring; 2. Do not open the sunroof on bumpy roads to prevent component deformation or motor damage due to excessive vibration between the sunroof and the sliding rails; 3. It is strictly prohibited to open the sunroof during rain or when cleaning the vehicle.
2
1
Share

Where is the Buick LaCrosse Air Filter Located?

Buick LaCrosse's air filter is located inside the glove compartment on the passenger side. To replace the filter, you need to first remove the glove compartment and then open the cover of the air filter box to replace it. The replacement cycle for the Buick LaCrosse air filter is generally every 10,000 kilometers. Introduction to the Buick LaCrosse: 1. Exterior Introduction: New wing-shaped air intake grille, wing-shaped full LED headlights, wing-shaped full LED taillights 2. Power Introduction: The 2021 Buick LaCrosse is equipped with a 2.0T variable cylinder turbocharged engine. Based on the modular design concept of single-cylinder optimization, it utilizes a series of innovative technologies, including variable cylinder technology, to achieve a better balance between fuel consumption and power, with a combined fuel consumption of only 6.9L.
6
4
Share

Which 7-seater models does Shanghai Volkswagen offer?

Volkswagen's 7-seater models include the Touran 1.4TSI, Sharan, Multivan, Volkswagen Caravelle, and Touran L. Below is a related introduction to some of Volkswagen's 7-seater models: 1. Volkswagen Touran 1.4TSI: Body dimensions are 4395mm in length, 1794mm in width, 1658mm in height, with a wheelbase of 2678mm. It features front-wheel drive, a 7-speed dual-clutch transmission, and a combined fuel consumption of 7.1L/100km. 2. Touran L: The Touran L measures 4527mm in length, 1829mm in width, and 1659mm in height, with a wheelbase of 2791mm. Compared to the previous generation, the new Touran L has increased in length by 132mm, width by 35mm, and wheelbase by 113mm.
17
1
Share

What are the reasons for a black screen on the car navigation display?

There are several reasons for a black screen on the car navigation display, including the vehicle's power supply voltage, navigation system cables, and the power connector of the navigation display. Below are detailed explanations of the specific causes: 1. Vehicle power supply voltage issues: Check the stability of the vehicle's power supply voltage to rule out voltage fluctuations. 2. Navigation system cables: If the voltage is stable, inspect the cables on the back of the device for any issues. Try replacing the connections to troubleshoot. If the connections are fine, check the display cables of the device. If there's a problem, replace them with new ones for testing. 3. Loose power connector of the navigation display: If there's only no image but sound is present, it indicates a loose power connector of the navigation display. If there's no sound or image at all, the issue likely lies with the DVD system.
1
5
Share

What is the solution for dual-clutch low-speed jerking?

The solution for dual-clutch low-speed jerking is to replace the transmission. The steps for replacing transmission fluid are: 1. Remove the protective plate and loosen the drain plug; 2. Expose the transmission and remove the oil pan; 3. Clean the oil pan; 4. Reinstall the oil pan and refill the transmission fluid; 5. Open the transmission fluid filler hole and insert both the inlet and outlet pipes of the circulation machine into the transmission; 6. When the color in the fluid inspection window turns clear red, the fluid replacement via circulation machine is complete. The functions of transmission fluid are: 1. Keeping the gear system clean; 2. Lubricating the transmission components. Problems caused by insufficient transmission fluid include: 1. Jerky gear shifting and rough transitions; 2. Engine RPM increases normally when accelerating but vehicle speed doesn't rise proportionally; 3. Severe cases may lead to transmission overheating and damage, as bearings lack lubrication with increased friction coefficient; 4. Noticeable noise, especially during high-speed driving.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.