Which country is the Triumph motorcycle brand from?

1 Answers
McHayden
07/29/25 12:52pm
Triumph motorcycles are a British brand. The origins of Triumph motorcycles can be traced back to the late 19th century. In 1902, the first Triumph motorcycle was born at the Triumph factory in England. By the mid-1920s, Triumph had already become one of the leading brands in the UK, and in 1937, it introduced the world-famous 498cc parallel twin-cylinder Speed-Twin (T100). The 50s and 60s were the golden years for Triumph, with both its products and racing achievements being quite impressive. After experiencing the chaos of the 70s and the impact of Japanese manufacturers, British real estate businessman John Bloor purchased Triumph and led the brand towards a new era of development. The Street Triple 675R is one of Triumph's motorcycle models, launched in 2008. The main difference from the base version is that the R version features fully adjustable front and rear suspension, with a slightly higher seat height than the standard version. It is equipped with an inline three-cylinder, 12-valve, water-cooled engine, with major components produced in Japan, paired with a Japanese Keihin electronic fuel injection system, capable of delivering a maximum power output of 106 horsepower. In 2017, the 765RS was introduced to replace the 675R, capable of delivering a maximum power output of 121 horsepower at 11,750 rpm and 79 Nm of torque at 9,350 rpm, with a top speed of 272 km/h. It comes with five riding modes to meet both racing and street riding needs, as well as a new bi-directional quick shifter that automatically blips the throttle during downshifts. Dual-channel ABS anti-lock braking is standard.
Was this review help?
17
2
Share
More Forum Discussions

How to set the horn sound when locking the 2019 Volkswagen Bora?

The 2019 Volkswagen Bora does not have this feature enabled by default. You need to visit a 4S dealership to reprogram the data (via OBD vehicle system to modify the settings). Once this function is enabled, you can hear the horn sound when locking the car, ensuring that the doors are securely locked. Below is relevant information: 1. The horn is the audio signal device of a car. During driving, the driver uses it as needed and required to issue necessary audio signals, warning pedestrians and alerting other vehicles to ensure traffic safety. It is also used for urging and signaling. 2. The working principle is that when the horn button on the steering wheel or other positions is pressed, current from the battery flows through the circuit to the electromagnetic coil of the horn relay. The electromagnetic coil attracts the moving contact switch of the relay to close, allowing current to flow to the horn. The current activates the internal electromagnet of the horn, causing the diaphragm to vibrate and produce sound. 3. Horns can be classified by their sound-producing power into electric horns and air horns; by shape into spiral, cylindrical, and basin types; by frequency into high-pitch and low-pitch horns; by wiring into single-wire and double-wire horns; and by contact into contact-type (ordinary) electric horns and contactless (electronic) electric horns. Air horns are mainly used in heavy-duty vehicles with air brake systems, while electric horns are widely used in small and medium-sized vehicles due to their simple structure, compact size, lightweight, pleasant sound, and easy maintenance.
10
0
Share

What does it mean when the car prompts 'Change engine oil, please change engine oil immediately'?

Modern cars are equipped with a maintenance reminder function. When the mileage or time approaches the maintenance interval, the vehicle's dashboard or multimedia system will display a prompt to change the engine oil. During the operation of a car engine, engine oil plays roles in lubrication, sealing, and cooling, reducing friction losses and extending the engine's lifespan. Typically, the remaining engine oil level is checked using an oil dipstick. Here’s how to use the oil dipstick: 1. Park the car and turn off the engine, then open the hood. 2. Locate the oil dipstick and wipe it clean with a cloth. 3. Insert the clean and dry oil dipstick back in, wait for three minutes, then pull it out. 4. Observe the oil level on the dipstick. Usually, the dipstick has two marks, H (High) and L (Low). If the oil level is between these two marks, it indicates that the oil level is sufficient, and the car can be driven normally.
13
2
Share

How to Lift Up the Car Wiper?

Here are the steps to lift up the car wiper: 1. Start the vehicle; 2. Turn off the engine again, and within one minute after turning it off, quickly push the lever on the right side of the steering wheel upward twice; 3. The wiper will then stop in the upward position, entering maintenance mode; 4. Next, you can manually lift the wiper until it is in a vertical position relative to the car, completing the operation of lifting the wiper; Wiper maintenance methods are as follows: 1. Regularly replenish the cleaning fluid in the windshield washer reservoir. If the wiper is not used for a long time, it may become deformed due to pressure, causing issues such as shaking, noise, and incomplete cleaning during the first few cycles of operation. These problems will disappear after continuous use, which is normal. 2. After each use of the wiper, it is best to lift the wiper arm once after parking and return the wiper to its original state. The wiper blade should be almost perpendicular to the glass to reduce the probability of rubber deformation.
4
4
Share

How often should the Accord Hybrid be serviced?

According to the maintenance manual, the service interval for the Accord is every 5,000 kilometers. Details are as follows: Introduction to car maintenance items: Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. Car maintenance mainly includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. The purpose of maintenance is to keep the car clean, maintain normal technical conditions, eliminate hidden dangers, prevent faults, slow down the deterioration process, and extend the service life. Introduction to maintenance precautions: The maintenance cycle varies greatly among different car series and brands, mainly due to differences in the specific technical conditions of different vehicles. Different brands of vehicles are equipped with engines of different designs. Some engines are made of better materials and have higher precision, resulting in relatively less wear; while some cars have higher requirements for engine oil, or even special requirements. Therefore, brand cars generally require corresponding original engine oil for lubrication.
11
2
Share

How many kilometers does a car need for a major maintenance?

Generally, a major maintenance is performed every 40,000 kilometers. However, this interval is not completely fixed, as some car models may require a major maintenance every 60,000 kilometers. The specific timing should follow the maintenance manual (vehicle user manual) as it provides detailed instructions. Additional information: 1. Major maintenance is based on minor maintenance. Regular minor maintenance only requires changing the engine oil and oil filter, while major maintenance involves more items. In addition to engine oil and oil filter, major maintenance generally includes the following items: 1) Replacing the air filter, cabin air filter, and fuel filter. 2) Transmission fluid. 3) Brake fluid. 4) Coolant. 5) Spark plugs. All of the above items usually need to be replaced. 2. Additionally, tires and brake pads should be thoroughly inspected, and if severe wear is detected, they must be replaced promptly. The replacement intervals for these parts can vary significantly due to various objective factors, but they are generally replaced around 40,000 to 60,000 kilometers. Another important component is the timing belt. The timing belt is a crucial part that is often overlooked. Check for signs of aging in the timing belt, and if any abnormalities are found, it should also be replaced promptly.
14
3
Share

What engine is used in the BMW F35?

The BMW F35 is equipped with three types of engines: a 1.5-liter turbocharged three-cylinder engine, a low-power version of the 2.0-liter turbocharged engine, and a high-power version of the 2.0-liter turbocharged engine. An engine is a machine that converts other forms of energy into mechanical energy. It can refer to both the power generation device and the entire machine including the power unit. Types of engines include internal combustion engines, external combustion engines, gas turbines, and electric motors. The BMW F35 features a double-joint spring strut front suspension and a multi-link independent rear suspension, with a front-engine, rear-wheel-drive configuration.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.