Which country is the Toyota Corolla from?

What Are the Maintenance Techniques for New Energy Vehicle Batteries?

New energy vehicle battery maintenance techniques are as follows: Imbalance: The repair method involves identifying batteries with consistent capacity, voltage, self-discharge, and internal resistance for combined use. Sulfation: The repair method uses a sulfation repair device, which operates based on fuzzy digital control theory. By assessing the battery's condition, it continuously emits positive and negative variable-frequency microparticle waves during charging and discharging, removing hardened lead sulfate crystals within 10 to 20 hours. Plate softening: The repair method involves discharging the battery to 10.5V, followed by deep discharge using a light bulb for 1-5 hours, and then using an activation device for repair. Short circuit: For water-based batteries, the repair method involves drilling to remove short-circuited lead powder. For electric vehicle batteries, a rapid short circuit between the positive and negative terminals can burn out the short-circuited area. New energy vehicle batteries can be divided into two main categories: storage batteries and fuel cells. Storage batteries are suitable for pure new energy vehicles and can be classified into lead-acid batteries, nickel-based batteries (nickel-metal hydride and nickel-zinc batteries), sodium-based batteries (sodium-sulfur and sodium-nickel chloride batteries), secondary lithium batteries, and air batteries. Fuel cells are specifically for fuel cell new energy vehicles and can be categorized into alkaline fuel cells (AFC), phosphoric acid fuel cells (PAFC), molten carbonate fuel cells (MCFC), solid oxide fuel cells (SOFC), proton exchange membrane fuel cells (PEMFC), and direct methanol fuel cells (DMFC). New energy battery maintenance: Avoid storing with low charge, conduct regular inspections, prevent high-current discharge, accurately control charging time, avoid exposure to sunlight, and prevent plug overheating.

7

1

Share

Can a Keyless Entry Car Key Lock the Car When Left Inside?

A keyless entry car key cannot lock the car when left inside. Below is an introduction to key programming duration: 1. Variation: The specific time required may differ slightly depending on the vehicle brand and other factors. 2. Key Programming: If it's merely key programming without adding a new key, matching the existing key with the vehicle's anti-theft system won't take too long. Typically, it takes about 2 to 3 hours, but this is under the condition of having professional diagnostic equipment and skilled technicians. 3. Lost Key: If the key is lost and requires adding or replacing a key, or replacing all the car's lock cylinders, the time needed will be longer due to the involvement of the anti-theft system's security measures.

7

3

Share

What does it mean to schedule three sessions for Subject 1?

What does it mean to schedule three sessions for Subject 1? It means you can choose three different time slots or venues simultaneously, which can effectively increase the success rate. Here is a detailed introduction about the Subject 1 exam: 1. Overview: Subject 1, also known as the Subject 1 theory test or driver theory test, is part of the motor vehicle driver's license assessment. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the exam content includes theoretical driving fundamentals, road safety laws and regulations, local regulations, and other related knowledge. 2. Others: Students can study traffic regulations through driver simulation test software on mobile or computer devices. The exam papers are randomly selected and combined by the computer driver examination system according to the proportion specified in the "Work Specifications for Motor Vehicle Driver's Licenses."

8

4

Share

Is it okay to drive through accumulated water in rainy days?

Driving through waterlogged roads is generally not a big problem as long as the vehicle doesn't stall. Here are some precautions to take: 1. Don't stop, don't shift gears, don't release the throttle: Keep the steering wheel steady, drive in a low gear, avoid shifting or stopping, and proceed slowly and steadily. Remember not to release the throttle when driving through water. If water enters the intake and causes the engine to stall, you should wait for rescue on the spot and never attempt to restart the engine. After passing through the water, the driver can press the brake a few times to let the heat generated by braking evaporate the moisture attached to the brakes. 2. Don't swerve left and right when seeing accumulated water: Swerving upon seeing water or immediately braking to slow down are both very dangerous. Of course, don't drive through ditches or puddles at high speed either, as this can cause splashing, increasing the actual depth of the water and making it easier for water to enter the engine.

7

1

Share

What is the torque multiplication factor of the Grand Cherokee?

When in low-range four-wheel drive, the Grand Cherokee's torque is multiplied by 2.73 times. Engine maximum torque: The engine's maximum torque is related to the design of its intake system, fuel supply system, and ignition system. At a certain RPM, when these systems achieve optimal performance matching, the maximum torque can be reached. Impact of torque on vehicles: The magnitude of a vehicle's torque plays a decisive role in its acceleration and climbing ability. Generally, the greater the torque, the better. Higher torque means the engine can deliver more "power," resulting in faster changes in crankshaft speed, which enhances the vehicle's climbing ability, starting speed, and acceleration.

9

0

Share

What does Buick thickness mean?

Buick thickness refers to the thickness of the car's body panels. Below is a brief introduction about Buick: 1. Basic information: On May 19, 1904, David Dunbar Buick founded the Buick Motor Company in the United States with the help of the Briscoe brothers. In the second half of 1904, a carriage manufacturer, William C. Durant, recognized the enormous potential of Buick and decisively acquired the company. In 1908, he established General Motors and continued to use the Buick brand as the cornerstone for the new company's expansion. The company then began to prosper and achieved the highest annual car production in the United States. 2. Development history: In 1908, its production reached 8,820 units, ranking first in the United States. In the same year, General Motors was formed with Buick Motor Company at its core. As General Motors expanded, the Buick division became the company's second-largest department, primarily designing and manufacturing mid-range family cars. Buick's sales rank third within General Motors. Buick vehicles are characterized by high horsepower, individuality, practicality, and maturity.

4

Share

Which country is the Toyota Corolla from?

What Are the Maintenance Techniques for New Energy Vehicle Batteries?

Can a Keyless Entry Car Key Lock the Car When Left Inside?

What does it mean to schedule three sessions for Subject 1?

Is it okay to drive through accumulated water in rainy days?

What is the torque multiplication factor of the Grand Cherokee?

What does Buick thickness mean?

Can the Examiner Adjust the System in Subject Three?

Will points be deducted if the rearview mirror crosses the line in Subject 2?

What to Do If Two Sessions of Subject 2 Are Booked?

What is the fuel tank capacity of the Buick Excelle GT in liters?