Which country is the Qoros car from?

Can I Use First Gear for a U-Turn in Subject Three?

In the Subject Three driving test, there are no specific requirements regarding gear selection. Generally speaking, you can choose to make a U-turn in first or second gear. First gear is the safest option, but you may also use second gear for the U-turn if it can be done safely. The U-turn is one of the test items in Subject Three, requiring the examinee to control the speed, use the correct gear, and choose an appropriate location for the turn. Below are the correct procedures for Subject Three: 1. Upon hearing the voice command "Please make a U-turn ahead," the examinee should activate the left turn signal for at least three seconds, carefully observe the surroundings, and safely yield to oncoming traffic. When making the U-turn, a gear below second gear must be used, and the vehicle speed should be reduced to below 20 km/h. If necessary, first gear with half-clutch can be employed. The sequence of operations is as follows: signal, look, brake, downshift, and then turn. 2. Pay attention to yielding to vehicles coming from both directions, ensuring not to disrupt the normal flow of traffic. Before making the U-turn, you may stop and wait for the right moment to ensure the turn is completed in one smooth motion, avoiding any improper maneuvers or stopping midway. When turning the steering wheel, the motion should be smooth, moderate, and standardized, avoiding turning or returning the wheel too early, too late, or with excessive or insufficient angles.

12

1

Share

What is the release mechanism in a diaphragm spring clutch?

The release mechanism in a diaphragm spring clutch is the diaphragm spring itself. Below are relevant introductions about diaphragm spring clutches: 1. Features: It possesses an ideal non-linear elastic characteristic. Even when the clamping force of the diaphragm spring varies slightly, the clutch can still continue to function. During clutch disengagement Δλ’’, the required operating force for a diaphragm spring clutch is much smaller than that of a helical spring clutch, making the diaphragm spring clutch easier to operate. 2. Diaphragm spring clutch: It serves both as the clamping spring and the release lever, significantly simplifying the clutch structure and notably reducing the axial dimensions of the clutch. The diaphragm spring has excellent non-linear characteristics; with proper design, the clamping force can remain almost unchanged even when the friction disc wears to its limit, while also reducing the pedal force required to disengage the clutch, making operation easier. 3. Because: The diaphragm spring contacts the pressure plate over its entire circumference, ensuring uniform pressure distribution, good contact with the friction disc, and even wear. 4. Diaphragm spring: It is a rotationally symmetrical component, with its center coinciding with the clutch center, providing excellent balance. At high speeds, the reduction in clamping force is minimal, whereas helical springs arranged circumferentially may experience transverse deflection due to centrifugal force, causing severe bulging of the spring and thus reducing the clamping force on the pressure plate. 5. Easy to: Achieve good ventilation and heat dissipation effects, resulting in a long service life.

16

4

Share

What to Do If Your Car Doesn't Have Tire Pressure Monitoring?

Generally, the foot-pressing method is used to determine whether the tire pressure is normal. Another method is to use a tire pressure gauge for measurement. Simply align it with the valve stem and press for a few seconds to get a reading. If the four values are similar, it indicates that the tire pressure is normal. Below is information about tire pressure monitoring: 1. Install a tire pressure monitoring device on the tire. Simply screw the sensor onto the tire, and the readings will be displayed on the dashboard. This type of device is much cheaper than built-in ones and is very easy to install, making it a more accurate alternative to the foot-pressing method. However, these external tire pressure monitors have many drawbacks, such as being affected by temperature, which can lead to inaccurate readings. 2. Built-in tire pressure monitors are much more convenient. Once installed, you don’t have to worry about them, and the readings are more accurate. However, they also have certain disadvantages: installation is more complicated and must be done by professionals, and the cost is higher, typically around four to five hundred yuan, with additional installation fees. 3. Built-in tire pressure monitors are placed inside the tire, so they are not affected by temperature, ensuring accurate readings. They don’t need to be removed during inflation and are completely unaffected. Since they are installed inside the tire, there’s no risk of theft, and they only need to be installed once.

16

5

Share

What is the method to check the correct orientation of tire installation?

To check the correct orientation of tire installation, look for a numerical mark on the side of the tire, which indicates the correct side. The side with the number should face the front of the wheel hub. The functions of tires are: 1. To transmit driving force, braking force, and steering force for vehicle operation; 2. To support the vehicle load; 3. To reduce and absorb vibrations and impacts during driving, preventing severe vibrations from damaging vehicle components. Methods for tire maintenance include: 1. Regularly clean stones from the tire treads; 2. Minimize exposure to direct sunlight; 3. Regularly check tire pressure; 4. Pay attention to suspension maintenance; 5. Periodically inspect front wheel alignment; 6. Be mindful of driving habits.

2

3

Share

What is the tire model of the Volkswagen Polo?

The tire models for the Volkswagen Polo are 185/60R15, 195/55R16, 215/45R16, and 185/65R14. Tires are circular elastic rubber products assembled on various vehicles or machinery for ground rolling. Taking the 2019 Volkswagen Polo as an example, its body dimensions are: length 4053mm, width 1740mm, height 1449mm, with a wheelbase of 2564mm. The 2019 Volkswagen Polo features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 113PS, maximum power of 83kW, and maximum torque of 145Nm, paired with a 5-speed manual transmission.

2

5

Share

What is the Function of On-Demand Four-Wheel Drive?

On-demand four-wheel drive functions by switching to four-wheel drive only when necessary, while remaining in two-wheel drive under normal conditions. The system automatically shifts between two-wheel and four-wheel drive modes based on the vehicle's driving conditions without requiring manual intervention. On-demand four-wheel drive means that when encountering poor road surfaces or wheel slippage, the computer automatically detects and immediately redistributes the engine's torque to the front wheels, naturally switching to four-wheel drive mode, making it simpler to use. Each driven wheel of the car must have a differential to enable turning on high-traction surfaces, as the wheels rotate at different speeds during a turn.

18

5

Share

Which country is the Qoros car from?

Can I Use First Gear for a U-Turn in Subject Three?

What is the release mechanism in a diaphragm spring clutch?

What to Do If Your Car Doesn't Have Tire Pressure Monitoring?

What is the method to check the correct orientation of tire installation?

What is the tire model of the Volkswagen Polo?

What is the Function of On-Demand Four-Wheel Drive?

What cars have active suspension?

How to Deal with Abnormal Noises from Car Air Conditioning?

Can a Car Run Long Distance in 40°C High Temperature Weather?

Reasons for Engine Shaking While Driving