Which country is the Honda Accord from?

How to Turn Off the Engine After Parking a BMW 5 Series?

To turn off the engine of an automatic transmission BMW 5 Series after parking, follow these steps: 1. Press the brake pedal and shift the gear to N (Neutral). 2. Engage the handbrake, shift to P (Park), and release the brake pedal. 3. Turn off any unnecessary electrical devices in the car. 4. Check if the gear is properly aligned. 5. Rotate the key counterclockwise to the end, or press the start-stop button to switch the ignition to the OFF position. The BMW 5 Series is a mid-to-large-sized sedan under the Brilliance BMW brand. Its body dimensions are: length 5106mm, width 1868mm, height 1500mm, wheelbase 3105mm, and fuel tank capacity 68 liters. The BMW 5 Series is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 184ps and a maximum power output of 135kW, with a maximum power speed range of 5000 to 6500 rpm. It is paired with an 8-speed automatic transmission.

19

5

Share

How to reset the tire pressure warning light on Geely Emgrand GS?

Press the MENU button on the turn signal lever, select the tire pressure display item in the mileage and fuel information menu, and then press the SET/CLR button. The vehicle's instrument display will show the tire pressure relearning interface. After selecting "Confirm," the tire pressure light will disappear. Here are the detailed steps: 1. Press the "MENU" button on the turn signal lever, select the "Tire Pressure Display" item in the "Mileage and Fuel Information Menu," then press the Set/Clr button. The driver information center will display "Tire Pressure Relearn," select "Yes," and press the Set/Clr button. The horn will sound twice, and the driver information center will display "Tire Pressure Learn Enabled." At this point, the left front turn signal will stay on. Increase (or decrease) the left front tire pressure to 8.3 Kpa, and the horn will sound to indicate the stop of pressurization (or depressurization). 2. Next, the "right front turn signal will stay on," followed by the right rear and left rear turn signals in sequence. Repeat the pressurization or depressurization operation for the remaining three tires. After all four tires are processed, the turn signals will stay on for 3 seconds, and the horn will sound twice, indicating the completion of tire pressure learning. Adjust the tire pressure to the desired value. The tire pressure displayed on the information center is the actual pressure. If unsure, you can measure it with a tire pressure gauge. If the error is not significant, the process is complete.

20

0

Share

Where is the Zotye T600 key sensor located?

Zotye T600 key sensor is located inside the center console storage box in the car. You can see it by prying off the left outer handle cover with the key. Here are some related details: 1. In terms of interior, the Zotye T600 adopts a simple style, featuring a floating central control screen. The car is equipped with one-button start, keyless entry, electronic parking, reverse camera, full LCD instrument panel, automatic air conditioning, and vehicle stability system. Additionally, it also includes mobile phone connectivity and intelligent voice control. 2. In terms of power, the Zotye T600 is equipped with 1.5T and 1.8T engines, with maximum horsepower of 140Ps and 177Ps respectively, and peak torque of 207Nm and 245Nm respectively.

6

3

Share

What is the transmission model of the Buick Envision?

Buick Envision uses a 7-speed dual-clutch transmission and a 9-speed automatic manual transmission. The following are the relevant details of the Buick Envision: 1. The 7-speed dual-clutch transmission is a dry dual-clutch transmission independently developed by General Motors, but the performance of this dual-clutch transmission is relatively poor, with more noticeable jerks during gear shifts, and a common issue is that the transmission operates at a higher temperature. 2. All currently available models of the Buick Envision comply with the China VI emission standards, divided into two-wheel drive and four-wheel drive versions. The four-wheel drive version adopts a front-engine, front-wheel-drive layout, with full-time four-wheel drive and a multi-plate clutch central differential. The dimensions of the currently available Buick Envision models are 4686mm in length, 1839mm in width, 1686mm in height, with a wheelbase of 2750mm.

20

1

Share

What is the reason for the buzzing sound when accelerating in a Vios?

Vios accelerates with a buzzing sound due to insufficient oil lubrication and gasoline carbon deposits. The detailed reasons and solutions are as follows: Insufficient oil lubrication: This is because the oil does not fully lubricate all parts of the engine. After running for a while, new oil can uniformly lubricate all parts of the engine. It could also be due to severe wear and tear, followed by cleaning the internal parts of the engine. Running-in for a period of time can solve the issue. Gasoline carbon deposits: When the car's intake and exhaust are not smooth, it may be due to gasoline carbon deposits blocking the intake and exhaust ports, or it could be a filter issue. Cleaning the intake and exhaust ports or replacing the filter can solve the problem.

13

0

Share

What Engine Does the Jingyi S50 Use?

The Jingyi S50 is equipped with three engine options: 1.5L, 1.6L, and 2.0L, with engine models being 4A91S, 4A92, and DFMB20 respectively. Below is more detailed information about these three engines: 1. 4A91S Engine: The 4A91S engine has an actual displacement of 1499ml, featuring 4 cylinders arranged in an L formation with natural aspiration. It has a bore of 75mm, stroke of 84.8mm, compression ratio of 10.5, and a DOHC valvetrain. The engine reaches its maximum power at 6000 rpm and maximum torque at 4000 rpm. It utilizes multi-point fuel injection and recommends using 92-octane gasoline. 2. 4A92 Engine: The 4A92 engine has an actual displacement of 1590ml, with 4 cylinders arranged in an L formation and natural aspiration. It features a bore of 75mm, stroke of 90mm, and a DOHC valvetrain. The engine achieves maximum power at 5600 rpm and maximum torque at 4000 rpm. It also uses multi-point fuel injection and recommends 92-octane gasoline. 3. DFMB20 Engine: The DFMB20 engine has an actual displacement of 1997ml, with 4 cylinders arranged in an L formation and natural aspiration. It has a bore of 85mm, stroke of 88mm, compression ratio of 11, and a DOHC valvetrain. The engine reaches maximum power at 5600 rpm and maximum torque at 4000 rpm. It employs multi-point fuel injection and recommends 92-octane gasoline.

4

2

Share

Which country is the Honda Accord from?

How to Turn Off the Engine After Parking a BMW 5 Series?

How to reset the tire pressure warning light on Geely Emgrand GS?

Where is the Zotye T600 key sensor located?

What is the transmission model of the Buick Envision?

What is the reason for the buzzing sound when accelerating in a Vios?

What Engine Does the Jingyi S50 Use?

Do Car Leather Seats Need Waxing?

What Does the Drivetrain Mean?

Where is the ambient light switch for the Magotan?

Is There a Problem If a Car Drives Through Water Without Stalling?