Which country is the engine of the Exeed LX from?

1 Answers
AugustLynn
07/30/25 8:40am
Exeed LX's engine is made in China. Exeed LX's engine: The Exeed LX is equipped with a 1.6-liter turbocharged engine, paired with a 7-speed dual-clutch transmission. The engine of the Exeed LX has a maximum power of 145kW and a maximum torque of 290Nm. Engine: An engine is a machine that can convert other forms of energy into mechanical energy, including internal combustion engines, external combustion engines, jet engines, electric motors, etc. For example, an internal combustion engine usually converts chemical energy into mechanical energy. The term engine can refer to both the power-generating device and the entire machine including the power device (e.g., gasoline engine, aircraft engine). The engine was first developed in the UK, so the concept of the engine also originates from English, with its original meaning referring to "a mechanical device that generates power."
Was this review help?
14
1
Share
More Forum Discussions

How long after the production date is an imported car considered a stock car?

An imported car is considered a stock car if it has been over half a year since its production date. Below is a related introduction to stock cars: 1. Definition of a stock car: Parallel imported cars take up to 3 months to arrive at the port from the factory abroad, depending on the location of the foreign factory, such as the U.S., Canada, Europe, or the Middle East. However, delays in customs clearance at the port can prolong this period. Therefore, imported models that have been more than 6 months since their production date are considered stock cars. 2. Tips for identifying stock cars: The manufacturing year and month are marked on the nameplate in the engine compartment, and the time elapsed since then indicates the actual stock time of the car. An imported car with a stock time exceeding 6 months can be classified as a stock car. Additionally, if there are obvious signs of aging on parts such as the wipers, engine belts, or tires, the car can also be considered a stock car.
20
1
Share

Where are the grease points on the Changan Shenqi T20?

The grease points on the Changan Shenqi T20 include the steering ball joints, front axle, grease nipples on the rear axle, and universal joints of the drive shaft. Below is an introduction about Changan Automobile: 1. Overview of Changan Automobile: Changan Automobile generally refers to Chongqing Changan Automobile Co., Ltd., which has established a global collaborative R&D layout with different focuses across "six countries and nine regions" including Chongqing, Beijing, Hebei, Hefei, Turin in Italy, Yokohama in Japan, Birmingham in the UK, Detroit in the US, and Munich in Germany. 2. Technological R&D of Changan Automobile: The Changan Automobile Global R&D Center is located in Yufu Industrial Park, Liangjiang New District, Chongqing, and was officially put into use on April 9, 2019. Changan Automobile has deepened industrial cooperation, establishing joint innovation centers with Huawei, Tencent, Bosch, and Qingshan. The Chongqing Intelligent Connected Vehicle Technology Center is also located at Changan Automobile's Global Smart R&D Platform.
3
3
Share

What is the maximum extension period for vehicle inspection?

Extension period for vehicle inspection cannot exceed three years at maximum. Below are relevant details about annual vehicle inspection: 1. Timeline: For passenger cars and blue-license-plate minivans, the first six years after new vehicle registration require biennial inspections; after six years, annual inspections are required; after ten years, semi-annual inspections become mandatory. For trucks, annual inspections are required post-registration, transitioning to semi-annual inspections after ten years. 2. Regulations: If a vehicle is found operating without valid inspection by traffic police, the owner may face fines or vehicle impoundment. Moreover, insurance contracts classify untimely inspected vehicles as unqualified, making them ineligible for accident claims.
14
5
Share

What are the four situations when the ETC barrier does not lift?

Damage to the vehicle's integrated ETC device. Malfunction of the toll station's ETC system. The bank card linked to the vehicle's ETC is on a blacklist. In this case, you need to use the manual lane to pass through the toll station or highway entrance. ETC usage precautions: The ETC transaction sensing range is 8 meters. When the vehicle in front stops, to prevent issues with the front vehicle's ETC device or if it lacks an ETC device, maintain a distance of more than 10 meters to avoid automatic payment for the front vehicle. The ETC lane recognition speed is 20km/h. Driving too fast will prevent the system from reading the vehicle's device information, leading to payment failure. Unauthorized removal or movement of the OBU device, or if the ETC electronic tag falls off or becomes loose, will cause the electronic tag to fail. You can take it to the bank where the ETC card was issued or the highway service office for inspection. If the issue is not due to human interference, simply reactivating it will suffice. When using a debit card linked to ETC, insufficient balance will also cause payment failure. Follow the instructions of on-site staff to use the manual MTC lane with cash or card payment. Excessive thickness of the car's windshield can cause poor signal reception. This is especially important for vehicles that have had their windshields replaced after an accident or for those who have modified their front windshields.
8
5
Share

How Many Types of Diesel Fuel Grades Are There?

There are two main categories of diesel fuel grades: light diesel and heavy diesel. The grades include: light diesel has six grades (5, 0, -10, -20, -35, -50), while heavy diesel has three grades (10, 20, 30). Below are the relevant details: 1. Advantages of Diesel: High-speed diesel engines are more fuel-efficient than gasoline engines, and the demand for diesel is growing faster than that for gasoline. Diesel engines have higher thermal efficiency, greater power, lower fuel consumption, and are more economical, making them increasingly widely used. 2. Applications: Diesel is primarily used as the power source for tractors, large vehicles, diesel locomotives, construction equipment, excavators, loaders, fishing boats, diesel generator sets, and agricultural machinery. It serves as the fuel for diesel-powered vehicles, tractors, and other diesel engines. 3. Production Methods: Diesel is mainly produced by blending diesel fractions obtained from processes such as crude oil distillation, catalytic cracking, thermal cracking, hydrocracking, and petroleum coking. It can also be produced from shale oil processing and coal liquefaction.
16
4
Share

How Many Liters of Coolant Are Needed for a Classic Sylphy Coolant Replacement?

Classic Sylphy requires approximately 5 liters of coolant for a full replacement. Before completely replacing the coolant, conduct a thorough inspection to check for any signs of leakage or cracks in the pipes, with a particular focus on the five-way pipe. The five-way pipe is named for its five connection points that link various parts, and the coolant flows through it before being distributed to different sections of the car to perform its function. If there is any sign of coolant leakage in this area, replace the hose or resecure the connection as needed. Drain the old coolant, then flush the fluid channels with clean water. Add water to the coolant reservoir and continue filling until water flows continuously through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water draining from the reservoir may appear slightly pinkish. Continue adding clean water until the outflowing water runs clear. Remember to disconnect the heater hose and drain the water from the heater core. After draining for about an hour, add the new coolant through the radiator hose to allow it to flow quickly into the radiator. Then, fill the coolant reservoir with another batch of coolant until it is nearly full. Start the engine and let it run for about 10 minutes. As some air is expelled from the cooling system, the coolant level will drop. Top up the coolant until it reaches the "MAXT" mark on the reservoir.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.