Which country is Infiniti from?

How to use the Sorento 4WD lock button?

The usage method of the Sorento 4WD lock button is as follows: 1. Start the car and press the 4WD button on the left side of the dashboard. The yellow 4WD light on the dashboard will illuminate and remain constant when the speed is below 40KM/H. 2. When the vehicle speed reaches around 40KM/H, the 4WD computer begins to release the clamping force of the electromagnetic coupler. Additional information: The 4WD mode is suitable for use on muddy roads. Using the automatic mode on muddy roads can cause frequent and significant changes in the clamping force of the electromagnetic coupler, greatly increasing its heat generation and wear. Using the 4WD mode can effectively avoid these issues.

7

4

Share

What does ASPS mean in a car?

ASPS in a car stands for Anti-Submarining Protection System. This system is designed with a rear-sunken panel structure under the seat to prevent passengers from sliding forward during sudden braking, which could cause injuries to the neck and spine. Introduction to the Anti-Submarining Protection System: 1. When the vehicle is subjected to a frontal impact, in conjunction with seat belts, it restrains passengers in their seats and generates a sinking force to prevent forward sliding. This reduces the risk of greater injuries caused by legs hitting the dashboard or the head and chest hitting the steering wheel due to forward sliding. 2. In addition to the front-high and rear-low design of internal panels, some car manufacturers now use airbags to prevent passengers from sliding forward as part of the ASPS - Anti-Submarining Protection System.

10

3

Share

How to Turn Off the Rear Wiper of the Car?

To turn off the rear wiper of the car: simply push or pull the wiper lever forward or backward. This operation differs from the up-and-down movement of the front wiper switch. Pushing or pulling the lever controls the rear wiper's on/off function and its intermittent swinging, and it can also activate the automatic rear washer. The wiper is a blade structure installed in front of the windshield, consisting of components such as the motor, reducer, four-bar linkage, wiper arm spindle, and wiper blade assembly. The power source of the wiper comes from the motor. The wiper is a device used to remove raindrops and dust attached to the vehicle's windshield, improving the driver's visibility and enhancing driving safety.

9

0

Share

What brand is the car with the M logo?

The car with the M logo is Maybach, a brand under Mercedes-Benz specializing in the production of ultra-luxury vehicles. Maybach's models include: Maybach Zeppelin, Maybach Landaulet, Maybach Exelero, Maybach 62S, Maybach 62, and others. Taking the 2011 Maybach 62S as an example, its body dimensions are: length 6171mm, width 1980mm, height 1573mm, with a wheelbase of 3827mm. The 2011 Maybach 62S is equipped with a 6.0T twin-turbocharged engine, delivering a maximum horsepower of 630PS, a maximum power of 463kW, and a maximum power speed ranging from 4800 to 5100 rpm. It is paired with a 5-speed automatic transmission.

11

5

Share

What Causes the Compressor to Fail?

The causes of compressor failure are: 1. Poor internal lubrication of the compressor; 2. Unclean air conditioning system; 3. Excessive refrigerant or lubricant in the system; 4. Slippage of the compressor's electromagnetic clutch leading to excessive friction temperature; 5. Insufficient power configuration of the compressor. The function of the compressor is to compress and transport refrigerant vapor. Its working principle is: it sucks in low-temperature and low-pressure refrigerant gas from the suction pipe, compresses it through the operation of the motor driving the piston, and then discharges high-temperature and high-pressure refrigerant gas to the discharge pipe, providing power for the refrigeration cycle. Types of compressors include: 1. Fixed displacement compressor: The exhaust volume increases proportionally with the increase of engine speed; 2. Variable displacement compressor: Automatically adjusts power output according to the set temperature.

3

Share

What Causes a Car Remote Key to Malfunction?

Here are the reasons for Volkswagen remote key malfunction: 1. The remote key battery is depleted; replacing it with a new battery can resolve the issue. The internal batteries of the key come in different models, so pay attention to distinguish them when replacing. 2. Strong magnetic field interference in the surroundings affects the remote key's electronic signal communication. When the vehicle is parked in an environment with strong signal emitters, the electromagnetic field can penetrate through gaps and openings on the car body and affect related electronic components. 3. Internal damage to the remote key or damage to the signal receiver on the car body requires professional repair. When the unlock or lock button is pressed on the remote key, the key chip sends an encrypted signal to the car's built-in antenna. The signal is then processed by the electronic control unit, and the actuator performs the unlocking or locking function.

17

0

Share

Which country is Infiniti from?

How to use the Sorento 4WD lock button?

What does ASPS mean in a car?

How to Turn Off the Rear Wiper of the Car?

What brand is the car with the M logo?

What Causes the Compressor to Fail?

What Causes a Car Remote Key to Malfunction?

Can Electric Folding Mirrors Be Folded Manually?

What is the problem when the brake warning light is on?

How to reprogram after clearing the h6 tire pressure ID data?

What are the effects of driving in a gear that is too high?