Which country is Giti Tire from?

What Causes Oil Leakage in Car Air Conditioning Compressors?

Car air conditioning compressor oil leakage can be attributed to the following reasons: 1. Reason One: First, check for external oil leaks, paying special attention to whether the oil seals at the front and rear of the crankshaft are leaking. Damage, aging, or wear on the front crankshaft oil seal or the contact surface between the crankshaft pulley and the oil seal can cause front crankshaft oil leakage. Similarly, damage to the rear crankshaft oil seal or a too-small oil return hole in the rear main bearing cap, which obstructs oil return, can lead to rear crankshaft oil leakage. Additionally, check for leaks at the rear camshaft oil seal. Aging or damaged oil seals should be replaced promptly. Furthermore, inspect all components of the engine lubrication system for external leaks. 2. Reason Two: If oil is seeping from multiple areas such as the front and rear oil seals, cylinder head covers, valve lifter chambers, oil filter, or oil pan gasket, but no obvious leak is found, examine the crankcase ventilation system. Clean the crankcase ventilation pipes, especially checking if the PCV valve is malfunctioning due to carbon buildup or sticking. Poor crankcase ventilation can increase internal pressure, leading to multiple oil seepage points. 3. Reason Three: If oil continues to leak from the oil filter or oil line connections after tightening, check whether the oil pressure is too high or if the oil pressure relief valve is not functioning properly.

10

4

Share

What type of suspension does the Mercedes-Benz GLS have?

Mercedes-Benz GLS features double-wishbone independent suspension for both the front and rear. The double-wishbone independent suspension, also known as double-A-arm independent suspension, consists of upper and lower wishbones that simultaneously absorb lateral forces, while the strut only bears the vehicle's weight, resulting in high lateral rigidity. The Mercedes-Benz GLS is a large SUV introduced by Mercedes-Benz, with dimensions of 5218mm in length, 1956mm in width, and 1823mm in height, and a wheelbase of 3135mm. It is equipped with a 2.5L L6 twin-turbocharged engine, delivering a maximum power of 230kW and a maximum torque of 400Nm, paired with a 9-speed automatic transmission.

8

0

Share

What are the reasons for all brake lights not working?

The reasons for brake light malfunction are as follows: 1. Check the brake light switch. If the brake light switch fails, none of the brake lights will illuminate. During repair, you can try connecting the brake light switch with a wire. 2. Check the brake light bulbs. Frequent use of brake lights can cause bulb wear. When the filament breaks, the bulb won't light up. If your car's brake lights aren't working, inspect whether the bulbs are intact. 3. Check the fuse. If both bulbs and switch are confirmed to be functioning properly, inspect the fuse. Some vehicles don't have a dedicated brake light fuse but share one with other electrical devices. In this case, check the operation of other electrical devices in the car. Identify any non-functioning devices and replace the corresponding fuse. 4. Check the brake light wiring harness connector. Refer to the circuit diagram to locate the connector in the brake light wiring harness. Unplug it and check for loose or corroded pins inside. If found, repair the affected pins to resolve the issue. 5. Check the brake light ground wire. The tail lights on a car share a common ground wire. If this ground wire is broken or has a poor connection, the brake lights won't work. Therefore, inspect the ground wire and reconnect it if any issues are detected.

16

1

Share

Which Gear to Use When Going Uphill in an Underground Parking Garage?

Which gear to use when going uphill in an underground parking garage depends on the type of vehicle: 1. For manual transmission vehicles, use 1st gear in the garage to quickly achieve maximum torque; 2. For automatic transmission vehicles, use L gear if available, otherwise use manual mode to reduce speed and increase torque. Climbing requires continuous high torque output combined with power to maintain stable vehicle performance. Since underground garages have poor lighting and many blind spots, it is advisable to turn on the headlights and drive slowly. After exiting the garage, reduce speed and observe the surrounding traffic before proceeding.

4

0

Share

Should the Clutch Be Depressed When Starting the Car?

Depressing the clutch when starting the car can prevent the vehicle from suddenly lurching forward during ignition, thereby avoiding accidents. The functions of the clutch include: 1. Gradually increasing the driving force to ensure smooth vehicle startup; 2. Temporarily separating the engine from the transmission for gear shifting; 3. Preventing overload in the transmission system; 4. Reducing torsional vibration impacts from the engine to prolong the lifespan of transmission gears. While driving, the driver can press or release the clutch pedal as needed to temporarily disconnect or gradually engage the engine with the transmission, thereby cutting off or transferring the engine's power input to the transmission.

1

Share

How many times can you take the Subject 3 test in one day?

For the C1 driver's license, there are two attempts for the Subject 3 test on the same day. In some stricter regions, there might only be one attempt. If you fail both attempts on the test day, most places allow you to pay and schedule a retake, depending on local arrangements. Before the test, it's advisable to consult your instructor about the test procedures, standards, and opportunities to be well-prepared. Tips for the C1 driver's license Subject 3 test: 1. Starting: Turn on the left turn signal, honk the horn, fully depress the clutch and brake, shift to first gear, release the handbrake, slowly lift the clutch to the semi-engaged state, check the left rearview mirror, and look over your left shoulder to confirm no approaching vehicles (or pedestrians), release the brake to start, gradually fully release the clutch, and gently press the accelerator to speed up and shift gears. 2. Changing lanes: After the voice prompt, turn on the corresponding turn signal, check the left and right rearview mirrors, and look over your shoulder to confirm safety. After the turn signal has been on for more than 3 seconds, slightly turn the steering wheel to change to the adjacent lane. 3. Turning at intersections: Enter the appropriate turning lane in advance at the dotted line, reduce speed, turn on the corresponding turn signal, and after the signal has been on for 3 seconds, turn the steering wheel—make a wide turn for left turns and a tight turn for right turns.

14

2

Share

Which country is Giti Tire from?

What Causes Oil Leakage in Car Air Conditioning Compressors?

What type of suspension does the Mercedes-Benz GLS have?

What are the reasons for all brake lights not working?

Which Gear to Use When Going Uphill in an Underground Parking Garage?

Should the Clutch Be Depressed When Starting the Car?

How many times can you take the Subject 3 test in one day?

What are the differences between BMW M3 and 3 Series?

Where is the water pump located on a Toyota Crown?

What is the fuel tank capacity of a Polo?

What Does Applying for an Additional Driving License Mean?