Which country is Dunlop tires from?

What is the license plate of Binzhou City?

Binzhou City's license plate is Lu M, where Lu is the abbreviation for Shandong Province. Other license plate codes in Shandong Province are: Lu A for Jinan, Lu B for Qingdao, Lu C for Zibo, Lu D for Zaozhuang, Lu E for Dongying, Lu F for Yantai, Lu G for Weifang, Lu H for Jining, Lu J for Tai'an, Lu K for Weihai, Lu L for Rizhao, Lu N for Dezhou, Lu P for Liaocheng, Lu Q for Linyi, Lu R for Heze, Lu S for Laiwu, Lu U for Qingdao, and Lu Y for Yantai. License plates serve as a numbering and information registration system for vehicles, with the primary purpose of identifying the vehicle's region of registration and enabling the lookup of the vehicle's owner and registration details based on the plate.

11

4

Share

How Many Liters of Brake Fluid Are Needed for Replacement?

Generally, 1L of brake fluid is sufficient for replacement. Brake fluid typically needs to be replaced every 40,000 kilometers or every 2 years. It is essential to use brake fluid of the same grade as originally specified for the vehicle, which can be found on the brake fluid cap. When replacing brake fluid, it is crucial to completely remove any air from the system. If air enters the brake pump or hydraulic lines, it can significantly reduce braking performance, posing a serious safety risk. Ensure the drain bolt is securely tightened to prevent leaks, as brake fluid is corrosive and can damage other vehicle components. Brake fluid serves three main functions: First, it has a very low freezing point, ensuring good fluidity in cold temperatures. Second, it has an extremely high boiling point, preventing vapor lock under high-temperature conditions. Third, it undergoes minimal quality changes during use, avoiding corrosion of metal and rubber parts. When purchasing brake fluid, pay attention to its viscosity and color. Avoid using brake fluid that is too thin or colorless and transparent (qualified brake fluid is typically light or dark yellow). Qualified brake fluid is noticeably thicker than water, resembling diluted honey, and spreads slowly when poured onto a glass surface.

9

2

Share

Can the car heater be turned on without starting the engine?

Car heater cannot be turned on without starting the engine, the reasons are: 1. It will cause the battery to discharge without being charged, damaging the battery; 2. The heater supply lines may burn out without current. The correct method to turn on the car heater is: 1. Start the engine and wait for the temperature gauge to reach the middle position; 2. Turn on the heater and set the air circulation to external circulation to expel cold air from the cabin; 3. After 2-3 minutes, switch the air circulation to internal circulation. The functions of car air conditioning are: 1. Regulate cabin temperature, humidity, airflow direction and speed, and improve air quality through filters; 2. Provide a comfortable environment for passengers and reduce travel fatigue.

16

5

Share

How to Remove the Brake Disc of the Santa Fe?

The method to remove the brake disc of the Santa Fe is: 1. Lift the car and remove the tire; 2. Unscrew the bolts of the brake caliper, lift the brake caliper, and take out the brake pads. The brake disc is a round disc that rotates when the car moves. The brake caliper clamps the brake disc to generate braking force. The Santa Fe's body dimensions are: length 4930mm, width 1910mm, height 1720mm, with a wheelbase of 2865mm. The Santa Fe is equipped with a 2.0T turbocharged engine, with a maximum power of 169kW, maximum power speed of 6000rpm, and maximum torque of 353Nm.

9

1

Share

How to Remove the Rear Seat of a Mazda 6?

To remove the rear seat of a Mazda 6, follow these steps: 1. Open the trunk and locate the black handles on both sides. Pull them firmly to fold down the rear seat. 2. Press the middle part of the seat and lift it forcefully from the far left or right side to remove the rear seat. The Mazda 6 has a body size of 4670mm in length, 1780mm in width, and 1435mm in height, with a wheelbase of 2675mm and a minimum ground clearance of 150mm. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum power of 108kW and a maximum torque of 183Nm, paired with a 6-speed manual transmission. The front suspension type is a double-wishbone independent suspension with a stabilizer bar.

6

3

Share

Reasons for Insufficient Power of LNG Vehicles on Uphill Roads

The main reason for insufficient power of LNG vehicles on uphill roads is insufficient fuel in the LNG cylinder. Below are other reasons and solutions: 1. Insufficient fuel in the LNG cylinder: The minimum remaining amount of LNG should not be less than 50L; otherwise, it needs to be replenished in time. 2. The LNG cylinder valve is not fully opened: If the LNG cylinder valve is not fully opened, similar to a blocked fuel supply line in a diesel engine, it will cause poor fuel supply. First, carefully check whether the manual liquid outlet valve is fully opened; otherwise, the valve needs to be reopened correctly. 3. The pressure in the cylinder and buffer tank is too low: If the pressure in both the cylinder and buffer tank is below 0.8Mpa, it will result in poor fuel output from the cylinder. In this case, it is necessary to check whether the manual pressurization valve of the LNG cylinder and the manual valve (or vent valve) on the gas phase circuit are fully opened.

14

4

Share

Which country is Dunlop tires from?

What is the license plate of Binzhou City?

How Many Liters of Brake Fluid Are Needed for Replacement?

Can the car heater be turned on without starting the engine?

How to Remove the Brake Disc of the Santa Fe?

How to Remove the Rear Seat of a Mazda 6?

Reasons for Insufficient Power of LNG Vehicles on Uphill Roads

What is the emission standard for the 2018 Sagitar?

Can Coolants of the Same Color Be Mixed?

How Often Should the Spark Plugs Be Replaced in an Arrizo 7?

Is There 98-Octane Gasoline?