Which country does the Venucia brand belong to?

What is Volkswagen 4motion?

4motion is Volkswagen's full-time four-wheel drive system, representing the brand's advanced technological expertise. This system can freely distribute power based on driving conditions, even concentrating all driving force on a single wheel when necessary. Here is more information about Volkswagen 4motion: 1. 4MOTION is to Volkswagen what quattro is to Audi—it's merely a registered trademark and can no longer specifically denote a particular mechanical structure. 2. In 1986, Volkswagen first equipped the 'syncro' four-wheel drive system on the GOLF model, which is the predecessor of today's 4Motion. At that time, it used a silicone viscous coupling as the limited-slip transmission device. 3. The Golf syncro launched in 1986 was the first mass-produced Volkswagen vehicle to feature the 4MOTION four-wheel drive system. Since then, Volkswagen's four-wheel-drive family has continued to expand.

13

3

Share

How to determine if your ETC is functioning normally?

Here are the methods to determine if the ETC is functioning normally: 1. For a newly received ETC electronic tag (OBU device), when pressing the anti-tamper switch on the back, a red light will briefly illuminate, and the electronic tag screen will display messages such as 'Tag Invalid' or 'Please Insert Card,' indicating that the device is normal and does not affect activation. 2. For an ETC device that has been successfully activated, when inserting the ETC card, the corresponding vehicle information or account balance will be displayed, indicating that the ETC device is functioning normally. 3. If the screen does not display anything after inserting the card, or the ETC light does not turn on and remains blank while the ETC device is powered on, the device may be out of power or damaged. In this case, the device should be taken to an ETC service outlet or highway service office for testing and reactivation. 4. If the ETC electronic tag is invalid due to human damage or the ETC device falling off, the card cannot be used normally no matter how it is inserted, and the account balance will not be displayed. The solution is to take the device to an ETC service outlet for secondary activation.

20

1

Share

Which region does the license plate 'Hei L' belong to?

Hei L was the license plate prefix for the Songhuajiang region before its merger with Harbin City. In May 2014, the State Council approved adjustments to some of the administrative divisions in Harbin City, which included the abolition of the county-level Shuangcheng City and the establishment of Shuangcheng District. Here is more information about vehicle license plate numbers: 1. The first Chinese character of a license plate number represents the province where the vehicle is registered at the vehicle management office. The second letter is allocated based on the ranking of the city where the vehicle management office is located within the province. 2. In some large cities, the following five digits may consist of the first two letters followed by three numbers. 3. The first one or two digits indicate the sequence of license plate issuance. Generally, 2-4 letters are released at a time, and the following numbers are a code, not strictly in order, allowing for number selection.

9

4

Share

What kind of engine oil is suitable for BAIC Senova D50?

The BAIC Senova D50 equipped with a 1.5L naturally aspirated engine uses 30-viscosity full synthetic engine oil, while the model with a 1.5L turbocharged engine uses 40-viscosity full synthetic engine oil. When purchasing engine oil, it is recommended to choose full synthetic oil. This type of oil has artificially synthesized base oil with nearly identical molecular sizes and shapes, offering superior lubrication performance and a longer service life. The front fascia of the Senova D50 continues the Senova family's design style, featuring a shield-shaped air intake grille paired with propeller-wing-inspired decorative strips, inheriting SAAB's aviation heritage. The distinctive "North"-shaped characteristic lines on the front bumper, along with the rounded diamond-design headlights and polygonal fog lights, form the overall "North" character styling.

13

1

Share

Where is the cabin air filter of the Senova D70 located?

The cabin air filter of the Senova D70 is located in the cover panel on the left side below the glove compartment on the passenger side. After removing the glove compartment, you can see the evaporator cover panel on the left. Remove this cover panel to access the cabin air filter. The cabin air filter of the Senova D70 is relatively difficult to replace. During each maintenance service, it is advisable to check whether the cabin air filter is clogged. The Senova D70 is positioned as a mid-size sedan. In terms of body dimensions, it measures 4861mm in length, 1820mm in width, and 1462mm in height, with a wheelbase of 2755mm. In terms of power, the entire lineup is equipped with a 1.8T inline 4-cylinder turbocharged engine, paired with a 5-speed automatic transmission, delivering a maximum power of 130KW, maximum horsepower of 177PS, and maximum torque of 240NM.

9

1

Share

How to Solve High Idle Speed in Tiguan Engine?

The factors causing high idle speed in the engine are as follows: 1. The throttle body is dirty, with carbon deposits and gum affecting the normal return of the throttle, causing it to close intermittently. 2. Faults in the air flow sensor or throttle position sensor and their circuits. 3. Battery is undercharged. 4. Vacuum hose leaks or intake manifold gasket is damaged and leaking, PCV (Positive Crankcase Ventilation) valve core does not return properly, functioning intermittently. 5. Valves do not close tightly. Below are the solutions for high idle speed in the engine: 1. Check the throttle opening. For most electronically controlled engines, when the engine reaches normal temperature and the idle valve is fully closed, the basic idle speed is set to 500±50r/min. If the basic idle speed is too high, check the vacuum sealing of the system, especially the sealing of the vacuum tube, PCV valve, and crankcase-related parts. 2. Check the engine load signal. At this time, connect the idle control valve. Under normal engine operating temperature, its opening should be between 15%-25%. If the idle control valve opening is too large, check whether the engine load signal is normal, such as the air conditioning signal, battery voltage, and the temperature value of the water temperature sensor. 3. Check the vacuum degree of the intake manifold. Under normal engine idle conditions, the vacuum degree of the intake manifold should be 57-71kPa. If the vacuum degree is too low, it will cause abnormal pressure signals in the engine intake system, and the engine computer will mistakenly think the load has increased, thereby increasing the idle speed. 4. Reset the engine computer. Resetting the engine computer means clearing the fault memory in the engine computer and letting it relearn the idle speed. 5. Check whether the throttle is fully closed during idle and whether the throttle cable is stuck. Push the throttle lever in the closing direction. If the engine idle speed can drop to the normal speed, it means the throttle is stuck and does not close tightly. If the throttle cable is stuck, replace the cable. If the throttle shaft is stuck, disassemble and clean the throttle body. 6. Readjust the idle speed program according to the specified procedure of the engine. If the adjustment is ineffective, further inspection is required. 7. Check for leaks at the intake system pipe joints, vacuum hoses, etc. 8. Perform fault self-diagnosis. If there is a fault code, find the cause of the fault according to the displayed fault code.

20

3

Share

Which country does the Venucia brand belong to?

What is Volkswagen 4motion?

How to determine if your ETC is functioning normally?

Which region does the license plate 'Hei L' belong to?

What kind of engine oil is suitable for BAIC Senova D50?

Where is the cabin air filter of the Senova D70 located?

How to Solve High Idle Speed in Tiguan Engine?

What are the differences between the Leiling Hybrid and Leiling e+?

How to Determine the Vehicle's Emission Standard Level?

Which engine oil should be used for the Fit?

Should D- or D+ be used when going downhill?