Which country does the Mustang brand belong to?

1 Answers
PhoebeDella
07/25/25 11:48am
There are two automobile brands both named Mustang, one is a brand under Sichuan Automobile in China, and the other is a brand under Ford in the United States. There is no relationship between them. Main models of Sichuan Mustang: Spica, Bojun, Mustang T70, Spica New Energy, Mustang EC70, Mustang Mango, Mustang T Series, Mustang E Series, Mustang C30, Mustang F10, Mustang F99, etc. Main models of Ford Mustang include: Mustang, GT, Cobra-Jet, Super-Snake, etc. The logo of Sichuan Mustang is a flat-designed starburst logo, while the Ford Mustang logo features a galloping wild horse. Key milestones in the development of Sichuan Mustang are as follows: In August 2006, it was officially renamed Sichuan Automobile Industry Group Co., Ltd. In December 2007, the first product, Mustang F99, officially entered the development phase. In November 2009, Mustang F99 made its debut in Beijing and officially entered the Beijing market. In March 2013, Mustang's first CVT continuously variable transmission automatic model—M306—was launched. Key milestones in the development of Ford Mustang are as follows: In 1962, Ford developed the first concept car of Mustang—the Mustang-I concept car. On March 9, 1964, the first officially produced Mustang, a Wimbledon white convertible, rolled off the production line. In 1970, Ford acquired the Ghia studio. In 2021, Mustang specially released a model commemorating the 1973 Mustang Mach 1, which is also the fastest Mustang model.
Was this review help?
3
4
Share
More Forum Discussions

Where is the car A-pillar located?

Car A-pillars are located on both sides of the front windshield, connecting the two front doors and the engine compartment. The B-pillar is positioned behind the driver's side and serves as the pillar for securing seat belts, also connecting the front and rear doors. The C-pillar is the pillar at the rear of the car that connects the roof to the rear section. Some SUVs and MPVs may also have a D-pillar, which extends further back from the C-pillar. Functions of the car A-pillar: 1. It works together with the front edge of the engine and the vehicle roof to secure the front windshield. 2. The A-pillar also contributes to the structural rigidity of the car body. Together with the B-pillar and C-pillar, it helps prevent secondary injuries to the driver in the event of a rollover accident and enhances the vehicle's stability to a certain extent.
19
1
Share

What is the difference between full trailer and semi-trailer?

The differences between full trailer and semi-trailer are as follows: 1. Different connection methods with the tractor: A full trailer bears all the load by itself and is connected to the tractor only by a hook. The tractor does not need to bear the trailer load but only provides traction; A semi-trailer, in addition to providing support points and power, the tractor also needs to bear part of the trailer load. 2. Different standing methods: A full trailer can stand upright by its own tires, and the entire load is borne by the trailer itself, connected to the main vehicle only by a hook. The main vehicle does not need to bear the trailer load but only provides power to achieve traction and steering of the full trailer; A semi-trailer must rely on the front legs, and the semi-trailer is developed on the basis of the full trailer. The front half of the semi-trailer is placed on the traction saddle at the rear of the tractor, and the bridge behind the tractor bears part of the weight of the trailer.
17
5
Share

How to reset the oil maintenance light on the Lynk & Co 01?

The method to reset the oil maintenance light on the Lynk & Co 01: 1. Turn on the ignition switch without starting the engine; 2. Press and hold the trip meter reset button on the combination instrument panel, then observe the dashboard for a maintenance prompt; 3. The odometer will then begin to count down. When the display shows 0000.0, release the button. The Lynk & Co 01 has a body length, width, and height of 4549mm, 1860mm, and 1689mm respectively, with a wheelbase of 2734mm. The vehicle is front-engine, front-wheel drive, and its engine has a maximum power of 160kw and a maximum torque of 325nm.
7
2
Share

How to Bleed the Air from the X-Trail Clutch?

Method for bleeding air from the X-Trail clutch: 1. Use a plastic hose with one end attached to the bleeder bolt on the slave cylinder and the other end connected to a transparent container. Slowly pump the clutch pedal repeatedly; 2. One person holds down the clutch pedal while another loosens the bleeder bolt to allow hydraulic fluid to flow into the transparent container. Then tighten the bleeder bolt and repeat the operation multiple times until the discharged hydraulic fluid contains no air; 3. The discharged hydraulic fluid has absorbed air and must be left to stand for more than 30 minutes before reuse. Refill the reservoir to the normal level. The X-Trail has a body length, width, and height of 4675mm, 1820mm, and 1722mm respectively, with a wheelbase of 2706mm. The vehicle's engine delivers a maximum power of 111kW and a maximum torque of 194Nm.
8
3
Share

Can Car Wheels Be Changed at Will?

Car wheels cannot be changed at will. Although tires may seem simple in structure, changing the tire size can affect many vehicle parameters. After all, the entire car relies on the wheels to make contact with the road. If the wheel size is increased, the car's mileage will decrease because mileage is calculated based on the number of wheel rotations, which can affect the judgment of maintenance intervals. Car wheels, also known as rims or steel rings, are components that bear the rigid rotational inertia between the car and the tires. Their main function is to influence the size of the braking system and the selection of tire specifications. Larger wheels can accommodate bigger brake systems, and wider wheels allow for the use of high-performance, wider tires.
20
1
Share

What is inside a three-way catalytic converter?

A three-way catalytic converter contains three precious metals: platinum (Pt), rhodium (Rh), and palladium (Pd). It is called "three-way" because these three precious metals facilitate the reaction of the three main harmful gases produced after engine combustion, ultimately converting them into harmless carbon dioxide, nitrogen dioxide, and water. The three-way catalytic converter is a crucial external purification device in a car's exhaust system. Its primary function is to convert harmful gases emitted by the engine into harmless ones. The three-way catalytic converter is located in the first section of the car's exhaust pipe and resembles a canteen in shape. It is equipped with an oxygen sensor. If removed, it will affect the closed-loop control of oxygen concentration, thereby impacting fuel injection control and throttle opening, polluting the environment, and causing the vehicle to fail the emissions test during annual inspections.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.