Which country does the Fengguang ix7 engine come from?

2 Answers
LaDavid
07/25/25 3:40pm
The Fengguang ix7 engine comes from China and is independently developed and produced by Dongfeng Fengguang. The engine model of Fengguang ix7 is HD20, with a maximum horsepower of 231hp, maximum power of 170kw, maximum power speed of 5500rpm, and maximum torque of 355N.m. For daily maintenance of the Fengguang ix7 engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected according to the additional devices of the intake and exhaust system and usage conditions; For diesel engines, CB_CD grade diesel engine oil should be selected according to mechanical load, and the selection standard should not be lower than the requirements specified by the manufacturer; Regularly change the oil and filter. The oil quality of any grade of lubricating oil will change during use. After a certain mileage, the performance will deteriorate, causing various problems to the engine. To avoid failures, the oil should be changed regularly according to usage conditions, and the oil quantity should be moderate; When the oil passes through the fine holes of the filter, solid particles and sticky substances in the oil accumulate in the filter. If the filter is blocked and the oil cannot pass through the filter element, the filter element will burst or the safety valve will open, allowing the oil to pass through the bypass valve and bringing dirt back to the lubrication part, accelerating engine wear and increasing internal pollution; Regularly clean the crankcase. During engine operation, high-pressure unburned gas, acid, moisture, sulfur and nitrogen oxides in the combustion chamber enter the crankcase through the gap between the piston ring and the cylinder wall, mixing with metal powder produced by parts wear to form sludge. When the amount is small, it is suspended in the oil; when the amount is large, it precipitates from the oil, blocking the filter and oil holes, making engine lubrication difficult and causing wear; Regularly use a radiator cleaner to clean the radiator. Removing rust and scale can not only ensure the normal operation of the engine but also extend the overall lifespan of the radiator and engine.
Was this review help?
19
0
Share
DiNolan
08/11/25 9:32pm
The engine of the Fengon ix7 is primarily sourced from China, as it is independently developed and produced by the Dongfeng Fengguang brand. In my auto repair practice, I frequently work with this type of engine, which utilizes turbocharging technology and offers stable and reliable performance. The advantage of domestically produced engines lies in the timely supply of parts and low maintenance costs. If you've driven this vehicle, you'll notice smooth acceleration and good fuel efficiency. The Chinese automotive industry is advancing rapidly, and the Dongfeng Group has performed well in this regard, with significant potential for future upgrades. In fact, many domestic SUVs now use their own engines, reducing dependence on imports, which aligns well with domestic market demands. As a car owner, regular oil and filter changes during daily use can extend the engine's lifespan.
Was this review help?
12
0
Share
Expand All
More Forum Discussions

What is the replacement interval for the transmission fluid in an Audi A4L?

Audi A4L transmission fluid can be replaced every 60,000 kilometers. More information about Audi A4L transmission fluid is as follows: 1. Timely replacement of transmission fluid can effectively clean the transmission and reduce transmission failures. 2. Prolonged failure to replace the transmission fluid can lead to abnormal wear and severe deterioration of the fluid. 3. Delayed replacement can cause the transmission fluid to age and degrade, increasing fuel consumption and shortening the transmission's lifespan. 4. Not replacing the transmission fluid for a long time can cause the fluid to become granular, blocking oil passages and damaging valve bodies, directly affecting system oil pressure and power transmission, leading to sluggish response and gear-shifting shocks.
18
0
Share

How to deactivate the Camry's anti-theft system?

If it's the original factory system, there is a fuse box near the driver's left foot area; simply remove one of the fuses inside. For aftermarket installations, locate and remove the fuse on the red wire of the anti-theft control unit. Additional details about the Camry's anti-theft system are as follows: The Toyota Camry's anti-theft system consists of the main body control unit, front door courtesy light switches, rear door courtesy light switches, front door lock position switches, trunk lock assembly (trunk courtesy light switch), unlock warning switch, ignition switch, hood latch assembly (hood courtesy light switch), turn signal flasher, hazard warning lights, personal lighting assembly (front interior light), rear interior light assembly, horn relay, security horn, clock (security indicator light), DLC3, and CAN bus.
19
5
Share

How to resolve the automatic parking failure of Haval H6?

Electronic parking system failure may be caused by issues with the electronic handbrake, worn brake pads, or problems with the electronic system. To address this, it is necessary to visit a repair shop to read the fault codes with a decoder and perform repairs based on the fault codes. Below is an introduction to the automatic parking function: 1. Automatic parking refers to an automatic braking function. Once activated, for example, when stopping at a traffic light, it eliminates the need to manually engage the handbrake, simplifying operations by avoiding the use of a manual or electronic handbrake. For automatic transmission models, it also reduces the need for frequent shifting between D to N or D to P. 2. Traditional handbrakes require the driver to manually release the handbrake or skillfully coordinate the throttle and clutch for a smooth start on an incline. The automatic parking function, however, uses a slope sensor to provide precise parking force through the controller. During startup, the parking control unit calculates information from sensors such as clutch distance, clutch engagement speed, and throttle pedal. When the driving force exceeds the running resistance, the parking brake is automatically released, ensuring a smooth start.
2
1
Share

How to Replace Coolant in ix35?

Here are the steps to replace the coolant in ix35: 1. Unscrew the radiator cap, open the radiator drain valve (usually located at the bottom of the car), and drain the coolant. 2. Clean the cooling system by continuously injecting clean water into the engine cooling system. During the flushing process, keep the engine idling to maintain the circulation of clean water inside until clear water flows out from the radiator. 3. Stop adding water, wait for the water to drain completely, and then close the drain valve. 4. Add new coolant until the liquid level reaches between the MAX and MIN marks. 5. Close the cap, start the car, and let the engine idle for two to three minutes. The cooling system will expel internal air, causing the coolant level to drop slightly. At this point, you should add more coolant to top it up.
8
2
Share

What does it mean when the Mazda Axela water temperature gauge lights up?

Mazda Axela does not have a water temperature gauge, only a water temperature warning light. A blue warning light indicates that the vehicle's water temperature is too low; a red light indicates that the water temperature is too high. More information about the Mazda Axela water temperature gauge is as follows: 1. The water temperature gauge displays the coolant temperature, helping the owner understand the vehicle's condition. When the car's water temperature is too high, the owner should stop and wait for the water temperature to drop to normal before continuing to drive. 2. Reasons why the water temperature gauge does not move: The power line of the water temperature gauge is broken; the heating coil of the water temperature gauge is burned out; the heating coil of the water temperature sensor is burned out or the contact is poor; the wiring of the water temperature sensor is faulty or broken; the stabilizer that supplies stable power to the water temperature gauge circuit is damaged.
20
4
Share

What engines does the Kia KX7 have?

The engine of the Kia KX7 is produced by Shandong Rizhao Weiya Automotive Engine Manufacturing Co., Ltd., which is a domestic engine. The engine model of the Kia KX7 is G4KH, with a maximum power of 177kW, a maximum torque of 353Nm, and a maximum horsepower of 241. For daily maintenance of the Kia KX7 engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to the mechanical load, with the selection standard not lower than the requirements specified by the manufacturer. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, the performance deteriorates, which can cause various problems for the engine. To avoid failures, the oil should be changed regularly according to usage conditions, and the oil level should be kept moderate. When the oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and the oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing the oil to bypass through the bypass valve and still carry dirt back to the lubrication area, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder generated by part wear to form sludge. A small amount of sludge remains suspended in the oil, while a large amount precipitates, clogging the filter and oil holes, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall lifespan of the radiator and the engine.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.