Which country does the Buick Excelle come from?

1 Answers
StBrielle
07/29/25 9:57pm
Buick Excelle is an American brand. The car maintenance details are as follows: Minor maintenance interval: Minor maintenance should be performed every 5,000 kilometers or every six months. The main items include: engine oil change, oil filter replacement, and air filter cleaning. Maintenance purpose: Maintenance involves operations such as inspection, adjustment, tightening, lubrication, and replacement to keep the vehicle in good working condition. For any car, as its service age increases and mileage accumulates, its technical condition will gradually deteriorate. If not replaced in time, it will affect the normal operation and service life of the car, and may even lead to serious accidents.
Was this review help?
6
5
Share
More Forum Discussions

Where is the charging port of the Audi A3 located?

The charging port of the Audi A3 is located inside the glove compartment on the passenger side. The Audi A3 cannot directly play music via USB, as it only supports external audio connections, specifically the headphone jack type. The 2020 Audi A3 is equipped with two types of engines: a 1.4T-L4 turbocharged engine and a 2.0T-L4 turbocharged engine. Below are the details of these two engines: 1. 1.4-liter turbocharged engine: This 1.4-liter turbocharged engine delivers 150 horsepower and a maximum torque of 250 Nm. The engine's maximum power output is achieved between 5,000 and 6,000 rpm, while the maximum torque is available between 1,750 and 3,000 rpm. It features direct fuel injection technology and utilizes an aluminum alloy cylinder head and block. This engine is paired with a 7-speed dual-clutch transmission. 2. 2.0-liter turbocharged engine: The 2.0-liter turbocharged engine produces 190 horsepower and a maximum torque of 320 Nm. Its maximum power output is achieved at 5,000 rpm, and the maximum torque is available between 1,600 and 4,000 rpm. This engine employs a combination of direct and port fuel injection and uses an aluminum alloy cylinder head with a cast iron cylinder block. It is also paired with a 7-speed dual-clutch transmission.
6
5
Share

What Are the Common Causes of Brake Vacuum Pump Failure?

Here are the common causes of brake vacuum pump failure: 1. The vacuum pump temperature is too high: The temperature of the pumped gas is too high. Allow the gas to cool before it enters the vacuum pump. Ingesting hard objects causes wear to the vacuum pump body. Disassemble the vacuum pump to remove the hard objects, repair or replace the scratched components, and ensure sufficient cooling water flow. Increase the cooling water flow if necessary. Improper assembly causes rotor shaft displacement, leading to unilateral wear. Disassemble and inspect, then reassemble properly. 2. Issues with the vacuum pump oil: The oil level is too low. Fill the oil to the center line of the oil gauge. The oil is contaminated or deteriorated. Replace with new oil. The oil grade does not match. Replace with the specified grade of vacuum pump oil. The oil path is blocked, and the vacuum pump chamber does not maintain an adequate oil level. Check the oil path and the oil valve's intake, ensuring the oil path is clear. 3. The vacuum pump itself leaks: The sealing ring leaks. Inspect the sealing condition of all sealing parts and replace damaged sealing rings. The gas ballast valve gasket is damaged or not tightened. Replace the gasket and tighten the gas ballast valve. The exhaust valve plate is damaged, causing poor sealing. Replace the valve plate. The interference of the vacuum pump partition plate during installation is too large, causing deformation of the vacuum pump chamber and leakage. Repair the vacuum pump chamber or replace it. Leakage occurs due to poor end-face oil sealing of the vacuum pump. Disassemble the end cover, check for debris or unevenness, and clean or repair as needed.
19
4
Share

What is the Alphard 839?

Alphard 839 is a luxury MPV under Toyota. MPV (Multi-Purpose Vehicles), a multi-purpose vehicle, evolved from station wagons, combining the spacious passenger space of a station wagon, the comfort of a sedan, and the functionality of a van. It generally features a two-box structure and can seat 7-8 people. Below is an introduction to Toyota: 1. Headquarters: Located in Toyota City, Aichi Prefecture, Japan, and Bunkyo Ward, Tokyo, founded by Kiichiro Toyoda, with Akio Toyoda as the current president. 2. Ranking: Toyota ranked 10th in the 2020 Fortune Global 500 list.
1
0
Share

What is the fuel consumption of the Xingyue L?

The fuel consumption of the Xingyue L is 6.8-7.8L/100km. The currently available Xingyue L models include the 2021 2.0TD-DCT-EVO two-wheel drive Luxury, Flagship, Premium, Intelligent Premium, and Comfort versions, as well as the 2.0TD high-power automatic four-wheel drive Flagship and Premium versions, totaling seven models. The official NEDC combined fuel consumption is slightly lower than the actual fuel consumption, ranging from 6.8-7.8L/100km. Among vehicles in the same class, the Nissan Qashqai has an NEDC combined fuel consumption of 6.2-6.4L/100km, the Honda Vezel (Breeze) 6.0-6.3L/100km, the Haval Big Dog 6.9-8.0L/100km, the BYD Tang 9L/100km, and the Roewe RX5-MAX 6.8-8.9L/100km. The fuel consumption of a vehicle is directly influenced by five major factors: driving habits, the vehicle itself, road conditions, natural wind, and ambient temperature. The details are as follows: Driving habits: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle before red lights can increase fuel consumption. The vehicle itself: Vehicles with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements typically produce more power, requiring more gasoline to burn and perform work. Heavier vehicles also consume more fuel due to the greater driving torque needed. Road conditions: Driving on unpaved roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the vehicle's resistance and fuel consumption. Low ambient temperatures: When the engine block is cold, the injected gasoline does not atomize easily during cold starts, requiring more gasoline to burn, which increases fuel consumption. Additionally, at low temperatures, the engine control unit will command higher idle speeds to warm up the engine, further increasing fuel consumption.
7
4
Share

What does it mean when the Accord's oillife shows a negative number?

Oillife represents the remaining life of the engine oil. Typically, there will be a number following this indicator, indicating the specific life of the oil. When it drops to 20%-30%, the oil should be replaced promptly. Additional information is as follows: 1. Short-term driving is possible when negative: When Honda's oillife turns negative, the car can still be driven, but only for a short period, otherwise it may damage the engine. When oillife becomes negative, it proves that the lubrication capability of the oil has significantly decreased, and its lubrication effect on the engine has greatly weakened. 2. Calculation of oillife: It is a result calculated by the vehicle's computer based on parameters such as the vehicle's usage time, mileage, engine speed, etc. To protect the engine, the value calculated by the computer is usually a conservative estimate.
15
0
Share

What is the general power output of an alternator in a car?

The power output of an alternator in a car is generally around 1900 watts. The transition between high and low-speed power supply circuits is automatic, without the addition of any electromechanical control devices. Its working principle is analyzed as follows: Within the low-speed range, due to the alternator's low rotational speed, the series connection of the three-phase windings increases the output voltage, significantly enhancing the charging performance at low speeds. Automotive generators can be divided into DC generators and AC generators. Since AC generators outperform DC generators in many aspects, DC generators have been phased out. AC generators are categorized into the following types based on different classification methods: 1. Conventional AC generators. 2. Integral AC generators. 3. AC generators with pumps. 4. Brushless AC generators.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.