Which country does Mitsubishi belong to?

What Are the Driving Techniques for Manual Transmission?

There are three key techniques for driving a manual transmission car. Here are the details: 1. Smooth Start: Stalling during startup is mainly due to poor clutch-throttle coordination. After starting the engine, depress the clutch pedal, engage first gear, and release the handbrake. Quickly lift the clutch to the semi-engaged position, apply slight throttle with the right foot; when the RPM reaches around 1500-2000, slowly lift the clutch with the left foot while simultaneously applying throttle with the right foot for a smooth start. 2. Smooth Gear Shifting: When shifting gears, change to the appropriate gear at the correct engine RPM. Avoid skipping gears or driving at high speed in low gear. When the RPM reaches 2000 or above, shift to second gear at 10 km/h, third gear at 20 km/h, fourth gear at 40 km/h, and fifth gear at 60 km/h. 3. Smooth Stopping: When stopping, brake and downshift gradually. Hold the clutch and brake until the car comes to a complete stop. Shift to neutral, engage the handbrake, and turn off the engine.

7

5

Share

Can the Engine Start Without Pressing the Brake in One-Key Start?

No, the engine cannot start. One-key start requires pressing the brake to ignite and start the engine, which is a safety design in cars to prevent accidental activation of the switch that could cause the vehicle to suddenly move forward. When the vehicle is turned off, pressing and holding the one-key start button for 3 seconds without pressing the brake will only power on the vehicle without starting it. Some models require pressing the ignition switch twice consecutively. Below are the correct steps for starting and stopping the engine with one-key start: 1. After the driver sits in the driver's seat, press the start button once—the ACC light will turn on. Press it once more, and the vehicle will perform a self-check. 2. Press the brake and press the one-key start button to ignite and start the engine. 3. Release the foot brake; you can choose to warm up the engine in place, with the duration depending on the environment. 4. Press the brake again, shift to D gear, and release the handbrake (for electronic handbrakes, simply press the button briefly). 5. Slowly release the foot brake, gently press the accelerator, and the vehicle will start moving.

1

2

Share

How to Determine the Front Position of a Car?

How to determine the front position of a car can be viewed from four points. Here are the relevant introductions: 1. Determine the position of the left wheel. When the line of sight coincides with the protruding node of the left wiper and an object on the ground, the left wheel will run over that object while moving. For example, if the wiper node coincides with the center line on the ground, the tire will run over the center line. 2. Drive 60 centimeters away from the center line. When driving normally, staying 60 centimeters away from the center line is safer. When the line of sight coincides with the intersection of the cotton panel and the A-pillar and the center line, the car body is exactly 60 centimeters away from the center line. 3. Determine the position of the right wheel. When the line of sight intersects with the target through the right wiper, the tire will run over that target. 4. Drive 60 centimeters away from the roadside on the right side. When the right spray nozzle overlaps with the target on the roadside, the car body is still 60 centimeters away from the roadside.

5

1

Share

What Do the Gear Letters on a Car Represent?

Generally, automatic transmission cars have six gear positions, arranged from top to bottom as follows: P, R, N, D, S, L. Below is an introduction to the gears on an automatic transmission car: P: Parking gear, also known as the starting gear. When the car is parked and not in use, the gear is set to this position, where the wheels are mechanically locked to prevent rolling. R: Reverse gear. As the name suggests, this gear is used when reversing the car. N: Neutral gear. This gear is used when temporarily stopping the car. D: Drive gear, also known as the forward gear. In this gear, the transmission automatically shifts between gears 1-5 based on speed and throttle conditions. S: Sport gear. When this gear is engaged, the transmission can freely shift, but the shift timing is delayed, keeping the engine at high RPMs for a period to increase the car's power. However, this gear will result in increased fuel consumption. L: Low gear. In this gear, the transmission stays in 1st gear without shifting up, which can be used in situations like climbing hills. It also provides some braking function when going downhill.

8

2

Share

What are the symptoms of a faulty car thermostat?

There are two main symptoms of a faulty thermostat. Here are the details: 1. If the thermostat fails to open, the temperature gauge will display in the high-temperature zone, but the radiator fan won't turn on. The engine temperature will rise, and it's prone to losing coolant. 2. If the car thermostat fails to close, the water temperature will rise slowly, especially in winter. After 10-20 minutes, the water temperature may still be in the low-temperature zone, and the idle speed will be high. Here are some methods to diagnose thermostat failure: 1. Inspection after engine start: Open the filler cap of the coolant reservoir and check if there's any coolant flow. If not, it indicates a damaged thermostat or debris stuck between the main valve. 2. You can judge by feeling the temperature of the upper and lower radiator hoses. Start the engine and touch the hoses after 3 minutes. With a functioning thermostat, the upper and lower hoses should have different temperatures—typically, the upper hose is hot while the lower one is cool. When the engine reaches about 90°C, both hoses should be hot, indicating a good thermostat. If the upper and lower hoses remain at the same temperature after starting the engine, the thermostat is faulty.

8

4

Share

Should Regular Private Cars Use 92 or 95 Octane Gasoline?

Most ordinary naturally aspirated family cars can use 92 octane gasoline, while most turbocharged family cars require 95 octane gasoline. Some turbocharged family cars can also use 92 octane gasoline. In addition to checking the appropriate gasoline grade in the car's manual, you can also find it on the fuel tank cap, which will be clearly marked. Typically, the gasoline grade can also be determined based on the engine's compression ratio. Cars with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. However, with the application of some new technologies, the gasoline grade cannot be solely determined by the compression ratio. High-compression engines can also be tuned to use lower-grade gasoline because, besides the compression ratio, other factors come into play, such as ignition timing, turbocharging technology, and Atkinson cycle technology. Generally, the higher the gasoline grade, the higher the octane number and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. Occasionally using the wrong gasoline grade is not a problem—simply switch back to the correct grade after the current tank is used up. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles designed for lower-grade gasoline, using higher-grade gasoline will not cause damage, but the increased octane number can alter the fuel's ignition point, leading to delayed combustion in the engine. This reduces the engine's power output and thermal efficiency, resulting in poorer performance. For vehicles designed for higher-grade gasoline, using lower-grade gasoline can cause engine knocking. Because the octane number is significantly lower, the fuel's ignition point decreases, causing premature ignition during the compression stroke. If combustion occurs before the spark plug fires, resistance will arise during the upward stroke. This resistance makes the engine run very unstably. If the knocking is mild, it may only increase noise without obvious damage to the engine. However, if noticeable knocking occurs, it indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring.

16

4

Share

Which country does Mitsubishi belong to?

What Are the Driving Techniques for Manual Transmission?

Can the Engine Start Without Pressing the Brake in One-Key Start?

How to Determine the Front Position of a Car?

What Do the Gear Letters on a Car Represent?

What are the symptoms of a faulty car thermostat?

Should Regular Private Cars Use 92 or 95 Octane Gasoline?

What does LO mean when displayed on the vehicle's air conditioning?

How to Use the Remote Start Feature on Lincoln MKC?

Can I drive a few days after my driver's license expires?

Can ETC be installed on a windshield with pockmarks?