Which country does Dongfeng Venucia belong to?

What is the ground clearance of the Envision Plus?

The ground clearance of the Buick Envision is 173mm. Below is some relevant information about the Envision: 1. Introduction to the Envision: The English name of the Buick Envision is ENVISION, which is a new-generation strategic model of General Motors with significant strategic importance. The currently available models of the Buick Envision are only the 2019 versions, launched in December 2018, and include both China V and China VI emission standards. The length, width, and height of the Buick Envision are 4686mm, 1839mm, and 1660mm respectively, with a wheelbase of 2750mm. 2. Safety features: Front and side airbags for driver and passenger, front and rear head airbags, seatbelt reminder, rear child seat interface, tire pressure monitoring, ABS anti-lock braking system, brake force distribution, brake assist, traction control, electronic stability control, and lane change assist.

8

1

Share

What Causes Smoke and a Burning Smell from the Car Air Conditioner?

Smoke and a burning smell from the car air conditioner are likely caused by loose connections in the blower or speed control resistor circuit, leading to overheating and burning. Here are some related points to consider: 1. Clean promptly: Regularly clean the air conditioner vents. The vents are often overlooked but are the dirtiest and most in need of cleaning. Long-term neglect can breed bacteria and viruses, and in summer, it can reduce cooling efficiency and increase fuel consumption. 2. Maintain promptly: Regularly service the air conditioner condenser. The condenser's main function is to facilitate heat exchange in the air. If it becomes dirty or damaged, the cooling effect during summer use will be significantly reduced. 3. Replace promptly: Clean or replace the air filter regularly. The car air conditioner filter plays a crucial role in maintenance. If the filter becomes clogged and is not cleaned for a long time, it can lead to poor air quality. Prolonged neglect can result in the absorption of harmful exhaust gases, and in winter, heating can even produce toxic gases.

4

5

Share

What is the difference between 30TFSI and 35TFSI?

30TFSI and 35TFSI mainly differ in their engines. Here are the specific differences between the two: 1. Engine models: The 40TFSI uses the EA888 2.0T engine, while the 30TFSI is equipped with the EA211 series 1.4T engine. 2. Horsepower: The Audi Q3 with 30TFSI has 110 horsepower, and the Audi A4L with 40TFSI has 140 horsepower (specific horsepower varies by car model). 3. Power: The Audi Q3 with 30TFSI has a power output of 150 kW, and the Audi A4L with 40TFSI has a power output of 190 kW (specific power output varies by car model).

10

5

Share

What are the length, width, and height dimensions of the Envision Plus?

Buick Envision PLUS, a midsize SUV, has body dimensions of 4845/1883/1695mm and a wheelbase of 2833mm. Below is relevant information about the Envision Plus: 1. Powertrain: The Envision Plus is equipped with a 2.0T turbocharged four-cylinder engine featuring variable cylinder technology. A highlight of this new model is that all variants come standard with a 48V mild hybrid system. The engine delivers maximum power of 237 horsepower and peak torque of 350 Nm. 2. Interior: Maintaining Buick's signature premium interior quality, it introduces a newly designed 10-inch HD touchscreen to enhance technological sophistication. The vehicle also features front-row multifunction seats, adjustable-angle rear sliding seats, a dual-opening oversized center storage console, heated steering wheel, and a two-piece oversized panoramic sunroof.

4

5

Share

What is the reason for one side of the LED daytime running light suddenly not working?

When one daytime running light is on and the other is not, the reasons may include abnormal voltage at the wiring connector, a short circuit in the daytime running light circuit, a malfunction, or a burnt-out bulb. Below are the relevant details: 1. Inspection: Check whether the voltage at the wiring connector is normal. Generally, passenger cars have a voltage of around 12V, while buses and trucks have around 24V. If the voltage is normal, inspect the daytime running light circuit for loose connections, short circuits, or blown fuses. Repair or replace as needed. If none of these issues are found, the daytime running light bulb is likely burnt out and needs replacement. 2. Repair method: If the daytime running light is not working, it is advisable to have it inspected at a 4S shop, as issues involving the lighting system and wiring can be complex. If you are not familiar with the wiring, you may easily damage the original vehicle wiring. Generally, it is difficult to repair such issues on your own.

9

2

Share

What fault codes will be reported if the timing is incorrect?

No fault codes will be reported. However, fault codes will be recorded. Generally, there won't be any reports, but incorrect timing can cause issues such as the vehicle not starting or being difficult to start. The following are the symptoms of incorrect ignition timing: 1. Ignition too early: The air-fuel mixture burns too early, which can easily cause knocking and affect normal combustion. When suddenly accelerating the engine, there will be a "clattering" metal knocking sound, which may even damage engine components. There is also a knocking sound at idle, though it is not very loud. If the distributor housing is slightly turned in the direction of the rotor rotation, the sound will reduce or disappear, indicating the ignition timing is too early. When manually cranking the engine, there may be a reverse rotation (backfire) phenomenon. When using the starter, the resistance is high, making it difficult to turn the engine. 2. Ignition too late: This reduces the gas pressure above the piston, leading to decreased power, weak and sluggish engine operation, and an inability to increase speed when accelerating. The engine runs unevenly at high speeds. If the ignition timing is too late, the carburetor may backfire, the muffler may pop, the engine temperature may rise, fuel consumption may increase, and the engine may be difficult to start. 3. Erratic ignition timing: The engine may shake and produce knocking sounds, lose power, the carburetor may backfire, the exhaust pipe may pop, and the engine may even fail to start or operate normally.

8

1

Share

Which country does Dongfeng Venucia belong to?

What is the ground clearance of the Envision Plus?

What Causes Smoke and a Burning Smell from the Car Air Conditioner?

What is the difference between 30TFSI and 35TFSI?

What are the length, width, and height dimensions of the Envision Plus?

What is the reason for one side of the LED daytime running light suddenly not working?

What fault codes will be reported if the timing is incorrect?

What are the differences between the Envision Plus and Envision S?

What are the consequences of excessive fuel pump pressure?

What is the purpose of a vehicle pass?

How far can 30L of fuel travel?