Which country does Chery belong to?

What Happens If a Car Runs Out of Engine Oil?

Running out of engine oil can lead to the following symptoms: 1. The lubrication effect will significantly deteriorate. In severe cases, the lack of lubrication can cause engine seizure, and the consequences worsen as the oil level decreases. 2. When the engine is restarted, dry or semi-dry friction may occur between the cylinder and piston, accelerating component wear. The increased resistance during startup also makes it much harder to start the engine. Here are the functions of engine oil: 1. Reduces wear: There is rapid relative sliding between the piston and cylinder, as well as between the crankshaft and bearings. Engine oil prevents excessive wear of these components. 2. Cools the engine: Engine oil assists the radiator in cooling the engine by dissipating heat away from the engine. 3. Seals and prevents leaks: Engine oil forms a seal between the piston rings and piston, reducing gas leakage and preventing contaminants from entering. 4. Dampens vibrations: When pressure in the engine cylinder rises sharply, sudden stress is placed on the piston, piston pin, connecting rod, and crankshaft bearings. Engine oil lubricates these bearings, cushioning the impact load.

12

2

Share

How to Remove the Door Trim Panel?

Here are the steps to remove the door trim panel: 1. Open the door that needs to be disassembled and remove the inner handle decorative cover; 2. Insert a small flathead screwdriver into the gap between the decorative cover and the inner handle, gently pry and release the internal clips; 3. Use a T-30 spline tool to remove the screws securing the door trim panel at the inner handle area. Below are the methods for disassembling the components that secure the door trim panel: 1. Removing the screws at the bottom of the door trim panel: There are two plastic-patterned screws at the bottom that secure the door trim panel (these do not need to be fully removed). Use a T-30 spline tool to turn them 90 degrees clockwise. 2. Removing the clips securing the door trim panel: Take a large flathead screwdriver and use it to pry from the edge gap between the door panel and the door trim panel. Gradually release each clip to separate the trim panel from the door panel. Be careful to pry slowly to avoid damaging the clips or scratching the door panel. After all clips are released, hold the left side of the door trim panel with your left hand and the right side with your right hand, then gently pull outward with controlled force until the trim panel separates from the door panel. Similarly, hold both sides of the trim panel and lift it upward. Once completely separated, manually unplug the wiring harness connectors inside.

18

0

Share

What Causes Difficulty in Shifting Gears in a Transmission?

The reasons for difficulty in shifting gears in a transmission are as follows: 1. It may be caused by poor performance of the synchronizer, and it is also necessary to check the clutch plate and clutch travel. 2. The shift fork is loose or severely worn or even deformed. The screw fixing the shift fork is loose, resulting in incomplete gear engagement. After severe wear of the shift fork, it cannot move the gear, causing difficulty in shifting. 3. Wear of the positioning groove and positioning pin. The surface presents irregular steps, sometimes getting stuck during gear shifting, and the positioning pin cannot slide out of the groove, resulting in failure to engage the gear or difficulty in shifting. 4. Deformation of the shift shaft makes it difficult for the sliding gear to move.

10

3

Share

How to Remove Fog Inside Car Headlights?

To remove fog inside car headlights, turn on the headlights and high beams. After about 20 minutes, the fog inside the headlights will gradually disappear. It's important to avoid using high-temperature baking methods, as headlight materials are typically made of plastic. Excessive heat can cause the headlight surface to soften or deform. Generally, moisture inside the headlights will evaporate quickly under normal usage or sunlight exposure. If water frequently accumulates inside the headlights, it may indicate a cracked dust cover, allowing water to enter and form fog inside the lens. In such cases, it's advisable to have the headlight assembly inspected at a repair shop.

18

0

Share

Is it allowed to turn right at a circular traffic light?

According to the relevant regulations of the "Road Traffic Safety Regulations of the People's Republic of China", in the absence of special traffic instructions (such as traffic signs or police instructions), motor vehicles are allowed to turn right at a red light without being considered as running a red light violation. However, when there are traffic signs prohibiting right turns or when the red light is on, right turns are prohibited. Below are the specific details: Precautions for right turns: Turn on the right turn signal in advance. Check the rearview mirror to confirm that the following vehicle is at a safe distance, and be careful not to drive over the solid line. Turning right at a red light is considered running a red light: According to the latest revision of the "Regulations on the Application and Use of Motor Vehicle Driving Licenses", running a red light results in 6 penalty points and a fine. Running a red light refers to the act of a motor vehicle violating the prohibition of passage during the red light phase at a signal-controlled intersection or road section, crossing the stop line and continuing to move. It is recommended to slow down in advance when approaching an intersection to maintain a safe distance from large vehicles, allowing time and space to observe the traffic lights. If you have already crossed the stop line, do not reverse, as this may easily lead to a collision with following vehicles or pedestrians.

6

4

Share

How to Check if ESP is On?

To check if ESP is on, look at the ESP indicator light on the dashboard. When the ESP system is active, the ESP indicator light on the dashboard will flash. Cars equipped with ESP have it enabled by default, and even if it is turned off, it will be enabled again by default after restarting the engine. ESP is the electronic stability program for vehicles, and almost every car is equipped with it. ESP is very important for cars as it enhances driving stability and safety. The ESP system is part of the vehicle's active safety systems, which are designed to prevent accidents.

16

3

Share

Which country does Chery belong to?

What Happens If a Car Runs Out of Engine Oil?

How to Remove the Door Trim Panel?

What Causes Difficulty in Shifting Gears in a Transmission?

How to Remove Fog Inside Car Headlights?

Is it allowed to turn right at a circular traffic light?

How to Check if ESP is On?

Will touching the line deduct points in a right-angle turn?

What is the reason for the continuous rotation of the rearview mirror folding motor?

How to Turn Off the Auto Start-Stop Function in a Vehicle?

What happens if you put 92 gasoline in a car that requires 95?