Which consumes more fuel, 1.5T or 2.0L?

1 Answers
DelMelanie
07/30/25 1:47am
1.5T is more fuel-efficient. Methods to reduce fuel consumption and influencing factors are introduced as follows: Methods to reduce fuel consumption: You can add fuel additives to the fuel tank to improve combustion and remove carbon deposits. It is recommended to regularly inspect and maintain the vehicle, clean or replace the three filters, which will reduce fuel consumption. At the same time, the longer the idling time when parked, the greater the fuel consumption, so try to minimize idling time. Additionally, avoid rapid acceleration, slamming the throttle, and driving at low RPMs. Factors affecting fuel consumption: Various working conditions such as acceleration, deceleration, braking, and engine idling, as well as load capacity, ambient temperature, and whether the air conditioning is on, will all affect the vehicle's fuel consumption.
Was this review help?
8
1
Share
More Forum Discussions

Can You Stick Your Head Out During the Subject 2 Driving Test?

According to the examination rules, candidates are not allowed to stick their heads out during the test. Here are additional details: 1. While practicing for the Subject 2 test items, candidates often lean their heads out of the window to check if the wheels are crossing the line, but this method is incorrect. 2. As per the examination rules, during the test, candidates are not only prohibited from sticking their heads out but also from extending any part of their body outside the vehicle at any time during the moving test; otherwise, they will fail. 3. The Subject 2 driving test consists of five items: reversing into a garage, starting on a slope, parallel parking, curve driving, and right-angle turns. Among these, reversing into a garage and parallel parking require candidates to maneuver the vehicle by observing the rearview mirrors.
13
4
Share

Where is the tire pressure set button located?

The tire pressure monitoring system (TPMS) set button is generally located on the center console. Turn on the ignition switch, press and hold the TPMS reset button (set key), and release it after hearing a prompt tone. The TPMS will then store the current normal tire pressure data, automatically clear the previous data, and finally turn off the warning light on the dashboard, completing the tire pressure reset. Tire pressure monitoring is a system that automatically monitors tire pressure in real-time while driving, alerting the driver to tire leaks or low pressure to ensure driving safety. Generally, if the tire pressure is below 1.8 bar or above 3.0 bar, the TPMS will trigger an alarm. It is necessary to promptly check the tires and adjust the pressure. After inflating the tires, it is essential to reset the tire pressure immediately. Otherwise, the TPMS will continue to record the previous data, causing the tire pressure monitoring indicator light to remain on.
3
0
Share

What to Do If There Are Scratches on the Brake Disc?

It is normal for brake discs to have scratches, and shallow linear scratches are common. As long as the scratch depth does not exceed 0.6mm, there is no issue. Severe wear on the brake disc can cause vehicle vibration during braking. The wear limit for brake discs is 1mm, and they should be replaced promptly if abnormal wear occurs or the limit is reached. Here is additional information: 1. Inferior brake discs or drums in terms of material and structure can lead to premature wear of the brake pads. 2. Long-term damage to the brake calipers in the braking system can cause the brakes to not fully release, resulting in prolonged friction between the pads and the disc (or drum) and excessive wear. 3. The original brake pads may have a small design area, and prolonged high-speed driving, frequent braking, overloading, and exposure to high temperatures are also major causes of severe brake pad wear.
20
1
Share

What is the general lifespan of a Lavida shock absorber?

The Lavida shock absorber does not have a specific lifespan and can be replaced when damaged. There are many factors that affect the lifespan of a shock absorber, such as road driving conditions, personal driving habits, and the quality of the shock absorber itself. Common symptoms of shock absorber failure include abnormal noises, oil leakage, heavy steering, etc. Shock absorbers are also wear-and-tear parts that require regular replacement. As mileage increases, the performance of the shock absorber may deteriorate. If the shock absorber's performance declines, it can lead to a poorer chassis feel, reduced ride comfort, diminished handling, and weaker lateral support. When replacing a new shock absorber, it is recommended that car owners choose original factory products or high-quality alternatives from reputable brands. During installation, it is essential to use a specialized torque wrench to tighten the screws according to the specified torque. Additionally, after installing the shock absorber, a wheel alignment should be performed to prevent the vehicle from pulling to one side or experiencing uneven tire wear.
5
5
Share

Should tires be replaced in pairs?

Replacing tires depends on different situations. Here are the relevant introductions for tire replacement: 1. For front-wheel drive or rear-wheel drive vehicles, you can replace only the tires on the driving wheels. For all-wheel drive vehicles, it is recommended to replace all four tires at the same time. 2. If it is a new car and has not been driven much, you only need to replace the problematic tire because the wear on the tires of the same axle is similar. 3. If the tires have been driven for tens of thousands of kilometers but do not need replacement yet, and only one tire has a problem, replacing just one tire may cause uneven height, leading to bumpy rides or steering issues at higher speeds. In this case, it is best to replace a pair of tires. 4. If the repair shop does not have the same brand or model of tire for the vehicle, replace a pair for short-term driving, but for long-term driving, two pairs should be replaced.
3
3
Share

When Should Brake Fluid Be Replaced?

Here are the situations when brake fluid needs to be replaced: 1. While driving, if the brake warning light alerts or flashes during emergency braking or continuous braking, but the frequency is intermittent, it may be caused by insufficient brake fluid, requiring timely inspection and replacement. 2. During emergency braking, if the braking distance is significantly longer than before, and after ruling out the factor of brake pads, it may be due to the brake fluid. It is recommended that the owner address this issue promptly to avoid problems during braking. 3. When pressing the brake pedal, if there is a feeling of softness or lack of power, it may be caused by deteriorated brake fluid, especially during continuous or frequent braking. If the brake feels much softer than before and has elasticity, it needs to be addressed immediately. 4. If there is an inconsistent feeling of lightness and heaviness during braking, it may be due to deteriorated brake fluid. Excessive moisture in the brake fluid can cause high temperatures during braking, turning the water in the brake fluid into steam, which may lead to unstable braking performance.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.