Which company produces the 8-speed CVT for the 2021 Binyue?

1 Answers
McAndrew
07/30/25 4:46am
It is produced by Nanjing Punch. Below is a related introduction to the Geely Binyue: 1. Engine: The Geely Binyue is equipped with two powertrain systems. One is a 1.0T turbocharged engine with a maximum power of 136 horsepower and a peak torque of 205Nm, featuring direct injection technology. The other is a 1.4T turbocharged engine with a maximum power of 133 horsepower and a peak torque of 215Nm, using multi-point electronic injection technology. 2. Transmission: The Geely Binyue's transmission options include a 6-speed manual, 6-speed dual-clutch, and CVT continuously variable transmission.
Was this review help?
9
1
Share
More Forum Discussions

What is the voltage of car brake lights?

The brake lights of a car are generally classified into p21w and w21w, while the high-mounted brake lights of a car can generally be divided into w5w and w16w. Below is an introduction to brake lights: Differences: The difference between the two lies in the diameter of the car bulb and the power of the bulb. Most vehicle models choose to use w5w brake lights. Installation: The brake lights of a car are usually installed at the rear of the vehicle, featuring strong penetration to ensure that vehicles behind can still detect the braking of the front vehicle under low visibility conditions, thereby preventing rear-end collisions. The car brakes by pressing the brake pedal, which transmits electrical energy to the brake lights. Brake lights can be categorized into gas brake lights and LED brake lights. There is also a special type of brake light called the high-mounted brake light, whose function is to alert oncoming vehicles from behind. Generally, car models with lower chassis need to install high-mounted brake lights.
13
0
Share

Where is the fuse box?

Various models have different fuse box locations, commonly found under the steering wheel on the left side, others in front of the passenger seat, some in the glove compartment, trunk, or engine compartment. Below is an introduction to automotive fuses: 1. A blown fuse is disconnected in the middle, while a normal one remains intact. If a fuse blows, it may result in the car battery having power but the vehicle failing to start, or certain car components not functioning properly. When a part of the car malfunctions, do not ignore it easily; check promptly, especially the fuse, as it poses significant safety risks. 2. Automotive fuses are a type of current fuse. When the circuit current exceeds twice the fuse's rated current, it will melt within seconds to protect the circuit, commonly used for overcurrent protection in automotive circuits.
4
5
Share

What are the core components of electric vehicles?

The core components of electric vehicles are as follows: 1. Electric motor: Unlike traditional energy vehicles, the core of electric vehicles lies in the three-electric technologies, namely the electric motor, battery, and electric control technology. Currently, electric vehicles use several types of drive motors, including DC motors, AC induction motors, permanent magnet brushless DC motors, permanent magnet synchronous motors, and switched reluctance motors. The U.S. 2025 motor development roadmap is shown in Table 1, which aims to improve motor efficiency by increasing the grade of high-silicon steel sheets to reduce iron losses in the medium-high speed range and by using hairpin winding processes to reduce copper losses, among other methods. 2. Battery: The battery technology of pure electric vehicles is their core competitive advantage. In recent years, China's demand for power batteries has experienced explosive growth. Currently, power batteries are mainly divided into three major systems: ternary lithium batteries, lithium iron phosphate batteries, and lithium manganese iron phosphate batteries. Among these, lithium iron phosphate batteries and lithium manganese iron phosphate batteries, with their lower prices and stable performance, are widely used in electric buses, and their market share is showing an upward trend. Another classification method divides batteries into prismatic cells, pouch cells, and cylindrical cells. Prismatic cells hold an overwhelming advantage in the overall market, dominating both the new energy passenger vehicle and pure electric bus markets. Pouch cells are mainly used in the plug-in bus market, while cylindrical cells are largely limited to certain pure electric passenger vehicles and are more commonly used in pure electric specialty vehicles. 3. Battery management system: The battery management system is closely integrated with the power battery, monitoring various battery indicators, controlling output, and enabling communication with other systems. With advancements in electronic and computer technologies, automotive electric control technology has seen significant development, particularly in control precision, control range, intelligence, and connectivity. Automotive electronic control technology is a benchmark for measuring the advancement level of vehicles. Integrated controllers with high integration, reliability, and safety not only benefit the overall layout of electric vehicles but also contribute to their lightweight and standardization, as well as the real-time performance and reliability of information transmission. Additionally, integrated controllers reduce conduction interference, further lower the vehicle failure rate, enhance overall vehicle safety, significantly reduce the cost of electric vehicles, and promote the commercialization of the electric vehicle market.
14
5
Share

What is the fuel consumption of the Great Wall VV5?

Great Wall VV5 fuel consumption per kilometer is between 0.067-0.071L. The following is an introduction to car fuel consumption: Fuel consumption size: Generally, cars should be economical family cars. The specific fuel consumption is not only related to the model but also to road conditions and driving habits. Car fuel-saving methods: The temperature of the engine has a direct relationship with fuel saving. Too high or too low temperature will lead to an increase in fuel consumption; the working water temperature of the engine should be kept between 80℃-90℃. When starting the engine under low-temperature conditions, it is necessary to preheat it. Preheating and warming up the engine can significantly save fuel. Regular maintenance: The intake system must be kept clean and unobstructed. The air filter must be frequently blown, the tightness of the connecting belts should be appropriate, the tire pressure should not be too low, and the gap of the brake shoes should be frequently adjusted to avoid friction.
12
4
Share

What is the typical wattage for home charging of electric vehicles?

Electric vehicle home charging typically operates at 7KW. The relevant information regarding the power of home charging for electric vehicles is as follows: 1. Introduction to charging power: Charging stations are divided into two main categories, AC (alternating current) stations and DC (direct current) stations. Generally, AC stations have a power of 7KW and use 220V single-phase power. DC stations come in various power levels such as 30, 60, 100, 150, and 200KW. The actual charging power depends on the matching between the electric vehicle's battery parameters and the charging station, and it varies with the charging state. The exact power depends on the car's battery capacity. Generally, small and medium-sized electric vehicles have a capacity of 18 kWh when fully charged. If it takes 6 hours to fully charge, then the power would be 18/6=3 kilowatts. To calculate this, you need to know the input voltage and current of the charger. Moreover, during charging, the current consumed by the charger continuously changes and does not remain constant, so the calculated result is only a reference value. 2. Battery capacity factor: If it takes 6 hours to fully charge, then the power is 18/6=3 kilowatts, equivalent to a standing air conditioner. The power depends on the car's battery capacity, with small and medium-sized electric vehicles typically holding 18 kWh when fully charged. The charging power of electric vehicles accounts for about 15% of the national installed capacity. If fast charging stations are used during peak electricity periods, it could lead to a power gap of hundreds of billions of kilowatts. Conversely, during off-peak periods, about one-third of the installed capacity, or 2-2.5 billion kilowatts, is available. High-power charging can significantly improve charging efficiency, increase the utilization rate of charging stations, and appropriately reduce the vehicle-to-charger ratio. 3. Charging time: Different operating modes of electric vehicles require different charging times, which in turn require different charging methods to meet these needs. When the charging time requirement is not urgent, conventional charging can be done during off-peak electricity hours to extend the vehicle's range. When charging time is more pressing, fast charging or rapid battery swapping is needed to replenish the energy promptly.
14
1
Share

What Causes the Misalignment in Car Window Glass Movement?

The reason for the misalignment in car window glass movement is due to issues with the window regulator guide channel. The specific causes are: 1. Accumulation of dust and dirt in the guide channel, leading to increased friction. 2. Wear and tear or aging of the guide channel, causing its surface to become rough or damaged, resulting in higher friction. Additional Information: 1. Car windows are an essential part of the vehicle body, designed to meet the needs of interior lighting, ventilation, and visibility for drivers and passengers. 2. Depending on the installation position of the glass, car windows can be categorized into: front and rear windshields, side windows, and door windows. The design, structure, and quality of the windows significantly impact the driver's visibility, passenger comfort, aesthetic appearance, and aerodynamic characteristics. 3. The structure of car windows is typically curved and sealed, with rubber sealing strips connecting the window frame to the glass. These seals provide both sealing and cushioning effects, preventing damage to the windshield when the window frame deforms due to stress on the vehicle body.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.