Which company owns Lynk & Co?

Is the fuel consumption high for a newly purchased car?

Newly purchased cars generally have higher fuel consumption, which is common for almost every vehicle. When a car leaves the factory, due to machining precision of parts and assembly errors, it requires a certain mileage for running-in. During this break-in period, the car tends to consume more fuel, and you may feel a lack of power. Precautions for car break-in: Avoid overloading. During the break-in period, the load should not exceed 75% of the rated capacity. New cars should carry less than the specified weight and number of passengers, and overloading must be avoided. Do not drive at high speeds. There are speed limits for new cars during the break-in period. Generally, domestic cars should stay within 40~70 km/h, while imported cars should not exceed 100 km/h. Ensure the engine speed and vehicle speed operate at moderate levels. Typically, the engine speed during the break-in period should be between 2000~4000 rpm. Use high-quality gasoline. The gasoline used during the break-in period should not be of a lower grade than the manufacturer's specified standard. Do not add anti-wear additives, as this may result in insufficient break-in even after reaching the required mileage.

13

1

Share

Does the Haval H6 hill descent assist need to be manually activated?

Yes, because the hill descent assist is turned off by default. Here are the details: 1. Usage scenario: On relatively steep slopes, you can use the hill descent assist, where the vehicle's computer automatically controls the speed. At this time, you don't need to press the brake or the accelerator. 2. Location: Below the driver's seat, there is a row of three or four buttons. One of them is for the hill descent assist, with an icon showing a car going downhill. Here is additional information: 1. Hill descent assist: The function of the hill descent assist is to reduce the burden on the driver. The downhill assist control system can automatically maintain the vehicle speed at an appropriate level. 2. Notes: When using the hill descent assist system, the four-wheel drive must be turned on. If the slope is short, use the brakes; for long slopes, it is recommended to use manual low gear. On unpaved roads, the hill descent assist system can be used. The main purpose of using hill descent assist is to prevent the vehicle from rolling too fast when descending steep slopes. By automatically matching the engine braking, it improves safety.

2

0

Share

Where is ZOOMM QINGPAI engine oil produced?

ZOOMM QINGPAI engine oil does not have a fixed production origin, as it is manufactured by many OEM factories in China. Here are some details about ZOOMM QINGPAI engine oil: 1. Currently, engine oils on the market are divided into three main categories: mineral oil, semi-synthetic oil, and full-synthetic oil. ZOOMM QINGPAI engine oil belongs to the synthetic technology oil category, with 100% of its raw materials being imported synthetic technology base oils and top-tier additives. It incorporates unique lubrication technology and is enhanced with high-efficiency cleaning dispersant factors, ensuring continuous protection of the engine's internal cleanliness. 2. ZOOMM QINGPAI engine oil boasts exceptional oxidation resistance and cleaning performance, ensuring the engine remains as good as new for a long time. Its advanced lubrication technology provides the oil with superior anti-wear properties. Outstanding high and low-temperature viscosity stability enhances the engine's power performance. Excellent low-temperature start-up performance allows the vehicle to reach lubrication friction points instantly. Therefore, in terms of performance protection, ZOOMM QINGPAI engine oil—a semi-synthetic oil—outperforms ordinary mineral oils.

9

0

Share

In which city is the Haval automobile factory located?

Haval is a sub-brand under Great Wall Motors, which currently operates three factories: Xushui Factory, Tianjin Factory, and Baoding Factory. Here are the details: 1. Main production sites: Haval vehicles are primarily manufactured at the Xushui Factory and Tianjin Factory. 2. Xushui Factory: With a total planned area of 13 square kilometers, it includes five major sections: the vehicle plant, stamping and welding logistics park, comprehensive performance test track, supporting component industrial park, and residential area. The Xushui Factory mainly produces the Haval H8 and H9, with an initial annual capacity of 200,000 units. Haval's transmission factory is also located in Xushui, though it operates under the name of Honeycomb Yichuang, which has integrated Great Wall's core components such as powertrain, transmission, and new energy modules. The 7-speed wet dual-clutch transmission used by Great Wall is produced here. However, strictly speaking, the Xushui transmission factory only manufactures the housing and some drive shafts, with other components supplied from elsewhere and assembled at the Xushui Factory. 3. Tianjin Factory: Located in the Tianjin Binhai New Area, the factory spans a total of 1,582 acres across two phases, with a planned capacity of 500,000 units. Currently, it mainly produces models such as the Haval H2, H6, F7, and F7x.

12

2

Share

Where are the reinforcement ribs located on a car?

The reinforcement ribs of a car are mostly located on the roof, engine hood, and doors. The simplest form of a reinforcement rib is a rectangular column attached to the surface of the product. However, to meet certain production or structural requirements, the shape and size of the reinforcement ribs may need to be modified. Reinforcement ribs are generally found on some exterior cover panels. They enhance the strength of these cover panels, allowing automakers to reduce their thickness and weight, which contributes to the overall lightweighting of the vehicle. However, reinforcement ribs are usually not found on the body frame because the occupant compartment of the body frame is made of high-strength materials. Auxiliary functions of reinforcement ribs: During the assembly of seat belts, they may twist. To prevent this, some designs use holes with pins for positioning, while others may incorporate reinforcement ribs for this purpose. Reinforcement ribs can also be used for paint process drainage. By designing 2-3 reinforcement rib features with an R6 cross-section at the bottom of the inner sill panel, along with other liquid inlet holes, effective liquid flow can be achieved during the electrophoretic painting process in the paint shop, increasing the thickness of the paint film inside the cavity.

9

2

Share

Is the Hyundai Elantra a domestic car or a joint venture car?

Joint venture car. Below is the relevant introduction of the Hyundai Elantra: 1. Exterior: The waistline is one of the Elantra's distinctive exterior features. The smooth, slender waveform waistline fully showcases the Elantra's agile characteristics, enhancing the elegant and grand visual appeal of the side profile. The integrated rear bumper blends seamlessly with the lines of the taillights, setting a strong and powerful visual tone for the overall rear effect. 2. Space: Spacious and comfortable, with an oversized specification of 4542mm in length, 1775mm in width, and 1490mm in height, resulting in an ultra-long wheelbase of 2650mm. This makes the Elantra suitable for family use while also possessing the dimensions of a business model, becoming the model with the largest passenger space in its class. The 475L trunk capacity provides ample storage space for family trips and business travel. 3. Interior: The interior successfully creates a youthful atmosphere, with a more concise dashboard design. The blue backlighting of the instrument panel and dashboard is also very attractive at night. On the dashboard, steering wheel, and other parts, the imitation wood panels of the previous Elantra have been replaced by large titanium silver panels, aligning with current trends and making it more stylish. In terms of interior color schemes, the combination of dark upper and light lower interior colors can be considered the standard for family cars. In addition to the common black and beige options, the Elantra also offers black and gray choices.

14

3

Share

Which company owns Lynk & Co?

Is the fuel consumption high for a newly purchased car?

Does the Haval H6 hill descent assist need to be manually activated?

Where is ZOOMM QINGPAI engine oil produced?

In which city is the Haval automobile factory located?

Where are the reinforcement ribs located on a car?

Is the Hyundai Elantra a domestic car or a joint venture car?

Does coasting in neutral gear save fuel?

What is the fuel consumption of the BYD Song Plus?

How often is the A2 driver's license reviewed?

What Causes a BMW to Occasionally Stall When Braking?