Which company owns Aston Martin?

What is the mileage for the first maintenance of the Enjoy?

The first maintenance for the Enjoy is generally at 5,000 kilometers or 6 months, whichever comes first. This regulation can be checked in the maintenance manual or confirmed by calling the 4S store. According to the regulations, the documents required for the first car maintenance include: driver's license, vehicle registration certificate, first maintenance voucher, purchase invoice, maintenance manual, owner's ID card, and other relevant documents. The first car maintenance generally includes the following items: Check whether the level of the car's coolant meets the specified requirements. Check the fluid levels of the brake and clutch. Check whether the oil level in the power steering fluid reservoir meets the specified requirements. Check for any oil leakage at the interfaces of the system's oil pipes. Check the battery fluid level and the level of the windshield washer fluid. Check the tension and aging condition of the belts for the generator, air conditioner, water pump, and power steering pump. Check whether all front and rear lights of the car are functioning (including headlights, width lights, turn signals, brake lights, reverse lights, and fog lights). Check the tire pressure and wear condition of the car's tires, tighten the tire bolts to the specified torque, replenish the tire pressure to the specified value for the model, and rotate the tires based on wear conditions. Check whether the car's exhaust emissions meet the standards. Generally, no appointment is needed for the first maintenance at a 4S store; you can drive there directly. However, some 4S stores may have many vehicles for maintenance, which could result in a long wait. To avoid this, it is best to call ahead and make an appointment. Generally, the first maintenance should not be postponed. However, in certain special circumstances, you can communicate with the 4S store in advance. If they agree, postponement is possible. It is important to note that if the car develops a fault after postponement, the 4S store may refuse to cover it due to the delay, which carries some risk.

5

4

Share

What is the difference between TX and TXL?

TX is the China-spec model, primarily available in the Middle East version, specifically the Kuwait version; TXL is the low-spec Middle East version, with configurations equivalent to the mid-to-high-spec China-spec models. Below are the specific differences between the two: 1. Configuration: The TX version can be simply understood as the low-spec model; the TXL can be considered the standard-spec model. 2. Comfort: TXL places more emphasis on comfort, so its safety features, handling configurations, and seat comfort are significantly better than those of the TX. 3. Spare tire type: The TX version offers both under-mounted and rear-mounted spare tire options; the TXL mostly comes with a rear-mounted spare tire and includes a sunroof.

17

4

Share

What Causes the Steering Noise in Changan Eado at Low Speeds?

Changan Eado produces steering noise at low speeds for the following reasons: 1. Sound from the turn signal reset. If the turn signal is activated during steering, the noise may come from the rebound clip of the automatic reset mechanism of the turn signal, which is normal. 2. Noise from the steering column dust cover. If the noise comes from below the steering wheel, it may be from the steering column dust cover. Due to lack of lubrication in the dust cover, friction sound occurs during steering. Applying some grease inside the dust cover can eliminate the noise. 3. Noise from inside the steering wheel. If the noise comes from inside the steering wheel, it may be from the airbag clock spring. Remove the steering wheel airbag clock spring and apply some grease to see if the noise persists. If it does, the airbag clock spring may be damaged and needs replacement. 4. Noise from the shock absorber top bearing. If the noise comes from outside the car, it may be due to lack of lubrication in the shock absorber top bearing. Open the hood to check if the noise comes from the shock absorber top mount. If confirmed, applying grease to the top bearing can eliminate the noise. If the noise persists after greasing, the top bearing needs replacement at a repair shop.

18

5

Share

Will Manually Closing an Electric Tailgate Cause Damage?

Occasionally manually closing an electric tailgate will not cause immediate damage, but it can lead to wear and tear on internal components such as the motor, gears, and telescoping parts, thereby reducing the lifespan of the electric tailgate. There are three common ways to operate an electric tailgate: 1. Tailgate switch: Use the open/close button located on the tailgate itself. 2. Hands-free/sensor-based opening: Place your hand or any object in the designated sensor area to automatically open the tailgate, which is useful when your hands are full and you cannot use the key fob or manual operation. 3. Dashboard tailgate switch: Press the tailgate open/close button on the vehicle's dashboard to operate the tailgate.

12

1

Share

How to Determine the Maximum Speed of Car Tires?

You can determine the maximum speed of car tires by checking the tire specifications. For example, in the specification 195/65R15 88H, the two digits before the letter H represent the tire's maximum speed. Here is some information about car tire speed ratings: 1. The speed rating of a tire is usually indicated by letters and numbers: The speed rating indicates the maximum speed at which the tire can carry a specified load under defined conditions. 2. The speed rating of a tire is significant for driving: During driving, the vehicle speed must never exceed the tire's speed rating.

18

0

Share

How to Replace the Battery in a Teana Key Fob?

Nissan Teana key fob features three buttons: lock, trunk release, and unlock. Follow these steps to replace the battery in the key fob: 1. Press the switch on the back of the key fob to remove the mechanical key. 2. Use a small flathead screwdriver to pry open the two thin seams on the key fob. 3. Remove the internal battery with the flathead screwdriver and insert the new battery, ensuring the positive side is facing down and the negative side is facing up. 4. Reassemble the key fob by reversing the steps, then test the lock, trunk release, and unlock functions to ensure they work properly.

12

0

Share

Which company owns Aston Martin?

What is the mileage for the first maintenance of the Enjoy?

What is the difference between TX and TXL?

What Causes the Steering Noise in Changan Eado at Low Speeds?

Will Manually Closing an Electric Tailgate Cause Damage?

How to Determine the Maximum Speed of Car Tires?

How to Replace the Battery in a Teana Key Fob?

How to Replace the Key Battery for Mazda 3 Axela?

What are the functions of the expansion tank?

Is the left side of an automatic transmission car the brake or the accelerator?

What are the components of a car steering system?