Which company manufactures Xpeng Motors?

Can I use the manual lane when exiting the highway during the free period if I entered via ETC?

During the highway free period, you can enter via the ETC lane and exit through the manual lane. How ETC works: Through the onboard electronic tag installed on the vehicle's windshield, dedicated short-range communication is established with the microwave antenna in the ETC lane at the toll station. This utilizes computer networking technology to perform backend settlement processing with the bank, allowing vehicles to pass through highway or bridge toll stations without stopping while still paying the required fees. ETC usage precautions: The ETC transaction sensing range is 8 meters. If the vehicle in front stops, maintain a distance of over 10 meters to prevent automatic sensing and payment for the vehicle ahead, in case its ETC device is faulty or nonexistent. The ETC lane recognizes vehicle speeds up to 20 km/h. Driving too fast may prevent the device from reading vehicle information, leading to failed fee deductions. Unauthorized removal or movement of the OBU device, or if the ETC electronic tag falls off or becomes loose, may cause the tag to malfunction. It can be taken to the bank where the ETC card was issued or to a highway service office for inspection. If the issue is not due to human error, reactivation may suffice. When using a debit card linked to ETC, insufficient balance may cause fee deduction failure. Follow the guidance of on-site staff to use the manual MTC lane, paying via cash or card. Excessively thick car windshields may cause poor signal reception. This is particularly relevant for vehicles that have had their windshields replaced after accidents or for those with modified front windshields.

1

5

Share

What to Do About Car Oil Leaks?

Solutions for vehicle oil leaks are as follows: 1. Promptly replace failed oil seals: Some oil seals lose elasticity due to rubber aging after prolonged use and should be replaced immediately upon detecting leaks. 2. Avoid blockage of check valves and vent valves: This can cause temperature rise inside the housing, filling the entire space with oil vapor that cannot be discharged, increasing internal pressure, leading to higher lubricant consumption and shorter replacement cycles. 3. Properly address sealing of various oil pipe joints: Vehicle union nuts that are frequently disassembled are prone to thread stripping or breakage, causing oil seepage; replace union nuts and use lapping to ensure conical surface sealing, tightening the nut to achieve proper sealing.

10

3

Share

How to Change Transmission Oil with a Flushing Machine?

Steps for changing transmission oil with a flushing machine: 1. First, locate the vehicle's external flushing machine connector. After finding the connector, identify the inlet or outlet hose. 2. Then, connect the flushing machine's hoses to the machine, fill the container with automatic transmission fluid, and proceed with the oil change (Note: During the process, carefully monitor the hoses for any leaks). 3. Typically, using a flushing machine for transmission oil change requires more than double the amount of new oil compared to manual replacement, approximately 9-12 liters. Although the cost is higher, the results are significantly better, making this method suitable for automatic transmissions.

19

1

Share

Where to Place a Car Fire Extinguisher?

Fire extinguishers are best placed in the right-hand glove compartment, to the left of the driver's seat, or inside the door storage compartments. Below are some details about the placement of fire extinguishers: 1. Location: It is advisable to place the fire extinguisher on the right-hand glove compartment of the driver, to the left of the driver's seat, or inside the car door storage compartments. 2. Usage: In the event of a vehicle self-igniting, the onboard fire extinguisher should be used to extinguish the flames. If you detect a burning smell or see thick smoke coming from the car, recognize these as signs of potential self-ignition. Immediately pull the handbrake, turn off the power, quickly exit the burning vehicle, and use the fire extinguisher to cool down and extinguish the fuel tank and burning parts to prevent an explosion.

18

0

Share

How to Test the Quality of Engine Oil?

Methods to check the quality of engine oil are as follows: 1. Inspect the packaging: Genuine engine oil packaging is very detailed, with no blurred logos or unclear patterns. If the packaging appears fuzzy or the material is rough, it is likely counterfeit oil. 2. Check the seal: The seal is made of tin foil with the brand logo and has an effective sealing effect. If the seal is not tight, it is likely fake oil. 3. Observe the color: Genuine engine oil is bright and crystal clear, flowing smoothly when poured without any suspended particles or impurities. Fake oil appears dull and may have turbidity. 4. Smell the oil: Genuine engine oil is odorless. If there is a pungent or unusual smell, it indicates the oil is not genuine and may contain other substances.

18

5

Share

How to Safely Change Lanes for Beginners?

Methods for safely changing lanes while driving are as follows: 1. Before changing lanes, it is necessary to turn on the turn signal to alert passing vehicles. Failing to signal before changing lanes can easily lead to traffic accidents, compromising driving safety. 2. After activating the turn signal, confirm the traffic conditions ahead and behind by checking the car's rearview mirrors to determine the right moment to change lanes. Simultaneously, observe the blind spots on both sides of the vehicle to ensure no other vehicles are approaching. Only when it is safe should you prepare to change lanes, ensuring that the maneuver does not affect the movement of other vehicles. 3. Once safety is confirmed, steer gently to perform the lane change. During the process, be decisive and swift. Maintain a steady speed while changing lanes; avoid slowing down during the maneuver, as this can easily cause traffic accidents.

4

2

Share

Which company manufactures Xpeng Motors?

Can I use the manual lane when exiting the highway during the free period if I entered via ETC?

What to Do About Car Oil Leaks?

How to Change Transmission Oil with a Flushing Machine?

Where to Place a Car Fire Extinguisher?

How to Test the Quality of Engine Oil?

How to Safely Change Lanes for Beginners?

What Are the Causes of Uneven Tire Wear?

How Many Kilometers Should You Drive to Fully Charge a Car Battery After a Jump Start?

How many tons can the Jianghuai Junling V6 carry?

Where is the frame number of a Spozman electric vehicle located?