Which company manufactures the Jetour X70?

How Many Points Will Be Deducted for Occupying a Bus Lane?

Occupying a bus lane will result in a deduction of 2 points. Here are some precautions to avoid occupying bus lanes: 1. Know the permitted hours: Clearly understand the permitted hours for bus lanes. Some sections of bus lanes have clearly marked operating hours (usually during morning and evening rush hours), so avoid entering by mistake. 2. Identify signs: When driving on unfamiliar roads, slow down and identify the signs on both sides of the road. Following the general flow of traffic can effectively prevent illegal occupation of dedicated lanes. 3. Drive in the designated lane: If the current lane has heavy traffic and the adjacent lane is empty, do not casually switch lanes, as this might lead to mistakenly entering a bus lane.

6

1

Share

Is Tire Plugging Safe?

This is the hot vulcanization repair method, which is highly reliable. It can fully ensure tire safety. However, the punctured hole should not be too large—holes smaller than 2 millimeters can be completely sealed. Additional knowledge is as follows: 1. Nails in the tread can still be used: If the tread is punctured, the tire can continue to be used. Because the tread is the thickest part of the tire, a nail will not damage the internal structure of the tire, and it can still be used after repair. 2. Nails in the sidewall cannot be used: If the sidewall is punctured, it cannot be repaired because the sidewall is the weakest part of the tire and plays a crucial role in absorbing road vibrations. Therefore, if the sidewall is punctured, the tire must be replaced. 3. Precautions: It is best to use hot vulcanization for tire repairs, as it provides the best results and is less likely to cause secondary leaks. After repair, tire dynamic balancing must be performed. If dynamic balancing is not done, it may cause steering wheel and vehicle body vibrations while driving.

15

3

Share

What does the SPN1761 fault code mean?

SPN1761 fault code indicates a transmission malfunction. Below are the specific causes of transmission failure: 1. Solenoid valve damage: If the oil pressure solenoid valve is damaged, it can cause oil pressure to be too low or too high, resulting in a sensation of impact or lag when the clutch and brake engage. Similarly, a stuck shift solenoid valve can lead to power interruption. 2. Steel plate and friction plate burn-out: Burn-out of the clutch plate not only causes gear shift jerking but also results in weak driving performance. The debris from the friction can also contaminate the transmission fluid. 3. Transmission fluid not changed regularly: If the automatic transmission is not maintained for a long time, various performance indicators of the transmission fluid, such as lubricity, viscosity, and temperature stability, will significantly decline. Especially for the temperature of automatic transmission fluid, when the radiator is too dirty and heat cannot dissipate, the computer will detect high temperature and enter emergency operation mode. When the fluid temperature exceeds 135°, it can cause significant damage to components like friction plates and clutch plates.

8

0

Share

Can I Check Maintenance Records If I Don't Repair My Car at a 4S Store?

This is not a question of possibility. If it was the last maintenance and this time you don't perform maintenance but directly check the last record, it should be possible. The methods are as follows: To check the maintenance records at a 4S store, if the car has the information, you can query it for free on your mobile phone. There are two other methods: 1. Go directly to the 4S store: Provide the owner's proof materials to help you check. Generally speaking, the vehicle file system of 4S stores of the same brand is nationwide networked. Just bring the owner's identity certificate, purchase invoice, and other credentials to the 4S store to find after-sales service and retrieve the car's maintenance records. 2. Online query: Use a third-party query tool, provide the VIN code, and pay to view. Now many APPs provide maintenance record queries for 4S stores.

13

3

Share

What is the difference between high idle speed and low idle speed?

The difference between high idle speed and low idle speed lies in the different rotation speeds and fuel consumption. The following is a detailed introduction about the fuel consumption per 100 kilometers of a car: 1. Overview: The fuel consumption per 100 kilometers refers to the fuel consumption of a vehicle traveling a hundred kilometers on the road at a certain speed. It is a theoretical indicator of the vehicle. The fuel consumption per 100 kilometers is the value measured by the manufacturer in an objective environment using a dynamometer installed on the chassis of the vehicle, converted into speed parameters, and then specified speed driving is used to calculate the theoretical experimental fuel consumption data per 100 kilometers of the model. 2. Others: Since most vehicles are close to the economical speed at 90 kilometers per hour, most of the theoretical fuel consumption published externally is usually the fuel consumption per 100 kilometers at 90 kilometers per hour.

2

Share

What is the role of the VCU vehicle controller?

VCU is the electronic control system of new energy vehicles. This system is the core component of new energy vehicles, equivalent to the ECU of gasoline vehicles. VCU can control the operation of the motor in new energy vehicles and also manage the operation of other electronic devices in the vehicle. VCU acts as the brain of new energy vehicles. As the central control unit of new energy vehicles, the Vehicle Control Unit (VCU) is the core of the entire control system. The VCU collects data on the motor and battery status, accelerator pedal signals, brake pedal signals, actuator and sensor signals. After comprehensive analysis based on the driver's intentions, it makes corresponding decisions and monitors the actions of lower-level component controllers. It is responsible for normal vehicle operation, brake energy recovery, energy management of the vehicle engine and power battery, network management, fault diagnosis and handling, and vehicle status monitoring. This ensures the vehicle operates stably with good dynamic performance, high economic efficiency, and reliability. It can be said that the performance of the VCU directly determines the overall performance of new energy vehicles, playing a pivotal role.

15

3

Share

Which company manufactures the Jetour X70?

How Many Points Will Be Deducted for Occupying a Bus Lane?

Is Tire Plugging Safe?

What does the SPN1761 fault code mean?

Can I Check Maintenance Records If I Don't Repair My Car at a 4S Store?

What is the difference between high idle speed and low idle speed?

What is the role of the VCU vehicle controller?

What Does RT Stand for in Off-Road Tires?

What is the voice wake-up name for the Buick Excelle?

What is the SP grade of engine oil?

What is the engine of the Elysion Hybrid?