Which company does Aston Martin belong to?

Is the Acura TLX L rear-wheel drive?

Acura TLX L is a front-wheel-drive vehicle, with all models in the lineup being front-wheel drive and no rear-wheel or all-wheel-drive versions available. Below is some relevant information about the Acura TLX L: Introduction: Acura is a premium luxury brand under Honda, known for producing high-quality vehicles equipped with cutting-edge technology. The TLX L offers excellent handling and a comfortable ride. Powertrain: The Acura TLX L is a mid-size luxury sedan powered by a 2.4-liter naturally aspirated engine across the entire lineup. This engine delivers a maximum power of 153 kW and a peak torque of 247 Nm, with the maximum power achieved at 6,800 rpm and the maximum torque at 4,500 rpm. The engine features i-VTEC technology, direct fuel injection, and an aluminum cylinder head and block. It is paired with an 8-speed dual-clutch transmission, which provides quick gear shifts and high transmission efficiency. Suspension: The Acura TLX L is equipped with a MacPherson strut front suspension and a multi-link rear suspension.

7

2

Share

How to Check the Transmission Fluid of Toyota Levin?

Here are the steps to check the transmission fluid of Levin: 1. The Levin transmission is equipped with a transmission fluid dipstick. To check the fluid level, first pull out the dipstick; 2. Then wipe it with a cloth to clean the oil traces; 3. Reinsert it into the tube, pull it out again, and check the level. Below is a brief introduction to Levin: 1. The Levin is built based on the North American version of Toyota's A-class car. The sharp-looking North American version has been a bestseller for many years, consistently topping the sales charts in the A-class car market. The Levin inherits the champion genes of this model, boasting a high-quality foundation. 2. In terms of power, the gasoline version still features a 1.2T+CVT powertrain combination, with a maximum power of 85kW and a peak torque of 185N·m. The hybrid model is equipped with a 1.8L Atkinson cycle engine and Toyota's THSII hybrid system, with the engine delivering a maximum power of 72kW and a peak torque of 142N·m, and the motor providing a peak power of 53kW and a peak torque of 163N·m. The system's combined power is 90kW. The suspension remains a combination of front MacPherson independent suspension and rear double-wishbone independent suspension.

10

2

Share

What is the model number of the original brake fluid for the Corolla?

The model number of the original brake fluid for the Corolla is DOT3. Brake fluid replacement: Loosen the two oil pipes on the master pump in the engine compartment, drain the brake fluid, and tighten the oil pipes. First, fill the brake fluid completely, then lift the car. Use a method where one person presses the brake pedal inside the car while another person loosens the bleeder screw of the slave cylinder outside the car. Follow the principle of working from far to near, sequentially draining excess fluid from the left rear, right rear, left front, and left rear slave cylinders, then tighten the bleeder screws. Continue to top up the fluid in the reservoir, repeat the above process two to three times to thoroughly replace the brake fluid. Finally, ensure the fluid level is between the upper and lower marks on the reservoir. Corolla Hybrid battery lifespan: The Corolla Hybrid uses a nickel-metal hydride battery, which is known for its long lifespan. Under normal use, it can last up to about 10 years. The battery is always in a state of shallow charging and discharging, ensuring it lasts as long as the vehicle. Note that continuously using the starter when starting the car can cause the battery to be damaged due to excessive discharge. The correct method is to keep each starting attempt under 5 seconds, with intervals of at least 15 seconds between attempts.

9

2

Share

What is the Function of a Car Chassis?

The function of a car chassis is to support and install the car engine and its various components and assemblies, forming the overall shape of the car. It also receives the power from the engine, enabling the car to move and ensuring normal operation. Below is more information about car chassis: 1. The car chassis should be no less than 140mm in height because urban traffic congestion is severe, and the engine cooling system requires special design. Otherwise, it may easily cause "boiling." Most European passenger cars have a chassis height between 100mm and 140mm, while most Japanese and Korean passenger cars range between 140mm and 180mm. Generally, off-road vehicles have a chassis height between 180mm and 220mm. 2. A lower car chassis means it is closer to the ground. The most obvious benefit of a lower chassis is greater stability at high speeds. During driving, the car is affected by wind resistance. The lower the chassis, the smaller the gap between the car and the ground. At high speeds, airflow mainly passes over the top of the car, and the pressure generated by the airflow on the top can push the car toward the ground, enhancing tire grip and making driving more stable. 3. A higher chassis provides better off-road capability, allowing it to adapt to most road conditions. This reduces concerns about damage from stones or rough road surfaces impacting the chassis.

15

3

Share

What Are the Causes of a Heavy Steering Wheel?

The causes of a heavy steering wheel are: 1. Insufficient tire pressure; 2. Contaminated power steering fluid; 3. Internal failure of the power assist system; 4. Poor bearing lubrication. The working principle of a car steering wheel is to transmit torque to the rack and pinion mechanism, thereby pushing the wheels to turn left or right. Solutions for a heavy car steering wheel include: 1. Replenishing hydraulic power steering fluid; 2. Replacing circuit fuses; 3. Replacing flat bearings and replenishing kingpin grease; 4. Increasing lubrication for the steering tie rod ball joint pins. Steering wheels are categorized into: single-spoke steering wheels, dual-spoke steering wheels, triple-spoke steering wheels, and quad-spoke steering wheels.

3

1

Share

How Long Should Tires Be Used Before Replacement?

Tires should be replaced after 4 years of use. The functions of tires are: 1. Transmitting driving force, braking force, and steering force to achieve vehicle operation; 2. Supporting vehicle loads; 3. Reducing and absorbing vibrations and impacts during driving to avoid severe vibrations damaging vehicle components. Tire maintenance methods include: 1. Regularly cleaning stones stuck in tire treads; 2. Minimizing exposure to direct sunlight; 3. Promptly checking tire pressure; 4. Paying attention to suspension maintenance; 5. Regularly inspecting front wheel alignment; 6. Adopting careful driving habits by choosing smooth road surfaces, avoiding objects that may puncture or scratch tires, and steering clear of chemical spills that could corrode tires.

16

2

Share

Which company does Aston Martin belong to?

Is the Acura TLX L rear-wheel drive?

How to Check the Transmission Fluid of Toyota Levin?

What is the model number of the original brake fluid for the Corolla?

What is the Function of a Car Chassis?

What Are the Causes of a Heavy Steering Wheel?

How Long Should Tires Be Used Before Replacement?

How to Fold Down the Rear Seats of a Sagitar?

How often should Changan vehicles be serviced?

What to Do If the Car Key Breaks?

How to Identify Fully Synthetic and Semi-Synthetic Engine Oil?