Which city in Jiangsu does the license plate 'Su F' belong to?

What are the national standards for vehicle wading?

National standards for vehicle wading involve chassis height, exhaust pipe height, air filter height, intake port height, etc. Chassis height: The height of the chassis; water wading is not allowed if it exceeds the engine height. The vehicle chassis refers to the "ground clearance" item in the parameter configuration table when purchasing a car. The greater the ground clearance, the higher the chassis, and the higher the safety factor when passing through waterlogged roads. For most compact and small cars with low chassis, the position of the vehicle's intake port should be used as a benchmark when passing through waterlogged roads. Exhaust pipe height: It depends on the water depth; generally, wading is possible if the water does not exceed the car's exhaust pipe. Air filter height: Wading is allowed if the water does not exceed the height of the air filter. Below 60 cm: If the height of the exhaust pipe or intake port is above 60 cm, wading is not allowed.

9

2

Share

What Does an Exclamation Mark on a BMW Mean?

The appearance of an exclamation mark on the car dashboard indicates an abnormality or malfunction in the corresponding system. There are many indicator lights on the car dashboard that feature an exclamation mark, such as the tire pressure indicator, lighting fault indicator, steering system fault indicator, brake system fault light, transmission fault indicator, and windshield wiper fault indicator. Below is a detailed explanation of the exclamation mark warning lights: General Fault: A triangle with an exclamation mark inside. If this symbol lights up, it indicates a malfunction in the car's general performance, components, or functions. Common issues include parking sensor faults, fuel cutoff system intervention or malfunction, external light faults, engine oil pressure sensor faults, etc. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside. This is the automatic transmission fault warning light, indicating a transmission malfunction or transmission fluid level below the normal range. The transmission fluid should be replaced promptly. Brake System Fault: A circle with parentheses and an exclamation mark in the middle. This represents a brake system warning, primarily indicating a brake system malfunction or low brake fluid level. The brake system should be inspected immediately to avoid accidents. Tire Pressure Abnormality: A horizontal line with parentheses and an exclamation mark below. This represents the tire pressure monitoring warning light, which illuminates when the car's tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark. This is the lighting fault indicator, signaling a malfunction in one of the car lights. Solution: Visit a 4S shop for inspection as soon as possible, or check yourself, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue. In addition, during daily vehicle use, the fault lights displayed on the dashboard are divided into two colors: yellow and red: Yellow indicates a fault in the corresponding system that is not very severe. Reduce speed and proceed to a repair shop to eliminate potential safety hazards. Red indicates a very serious problem in the corresponding system. In such cases, do not continue driving. Pull over immediately and seek professional assistance to prevent unpredictable risks to the vehicle and personal safety. Note that when the car is started, all lights will illuminate for a system self-check and will turn off automatically after the check is completed. If a light does not turn on when the ignition is switched on, remains lit, or lights up while driving, it indicates a fault in the corresponding system. In such cases, seek professional help promptly to inspect and eliminate safety hazards.

5

3

Share

What Causes the Squeaking Sound When the Car Shuts Off?

In most cases, abnormal noises after the engine shuts off are normal, but they could also indicate damaged car components. Normal causes of abnormal noises: Cooling sound of the catalytic converter: The normal operating temperature of a catalytic converter ranges between 400-800°C. After shutdown, its operation gradually stops, and the temperature drops, causing the internal metal components to expand and contract due to heat, resulting in abnormal noises. Cooling sound of the exhaust pipe: During cold idle, the exhaust pipe can reach temperatures above 200°C. Under high load or when unburned fuel mixture ignites in the exhaust pipe, the temperature rises even higher, leading to thermal expansion and contraction, which produces noises, often originating from the front end or flexible joint of the exhaust pipe. Turbo cooling sound: Under normal conditions, exhaust gases can reach temperatures of 600-700°C, accelerating turbo rotation and friction-induced heat. After shutdown, thermal expansion and contraction become pronounced, causing noises. Engine cooling imbalance: After driving, the engine temperature is high. Upon shutdown, components cool at different rates, leading to friction between metal parts due to uneven contraction, resulting in abnormal noises. Fault-related causes: Loose screws at the catalytic converter joint: Thermal expansion and contraction after shutdown can amplify the noise. Damaged charcoal canister purge valve: May cause fuel tank deformation and noise. Faulty starter solenoid: The solenoid engages the starter gear with the engine flywheel. If it malfunctions, it may produce a "clattering" noise upon disengagement. Refrigerant line issues: For example, resonance between the AC low-pressure pipe and a specific engine RPM (usually low) can cause abnormal noises. Damaged parts should be replaced promptly.

12

1

Share

Will driving at 50 mph in third gear damage the car?

Driving at 50 mph in third gear can damage the car. Third gear at 50 mph is considered high-speed low-gear, which is a type of gear mismatch. Gear mismatch can be divided into high-speed low-gear and low-speed high-gear. When the car's gear does not match its speed during driving, the engine load increases significantly, and it also generates a lot of noise. Only when the car's gear matches its speed can the car run smoothly. Definition of gear mismatch: Gear mismatch occurs when the driver fails to downshift at the appropriate time, resulting in a mismatch between the car's speed and gear. The hazards caused by gear mismatch include higher fuel consumption, increased wear on transmission components such as the clutch, gearbox, driveshaft, and differential, irreversible damage to the engine, and certain wear on the car's transmission. Hazards of gear mismatch: Third gear at 50 mph is a high-speed low-gear situation, which increases the load on the engine. The hazards caused by gear mismatch include higher fuel consumption, increased wear on transmission components such as the clutch, gearbox, driveshaft, and differential, irreversible damage to the engine, and a series of issues like engine carbon buildup, incomplete fuel combustion, and reduced car performance. Long-term gear mismatch can easily lead to engine carbon buildup, incomplete fuel combustion, which reduces the car's performance and can cause a series of other problems. Standard gear shifting speeds: When using first gear, the car's speed should be controlled between 10-20 km/h. When using second gear, the speed should be between 20-30 km/h. When using third gear, the speed should be between 20-40 km/h. When using fourth gear, the speed should be between 40-50 km/h. The normal gear for 50 mph should be fourth gear. After shifting to fifth gear, the car's speed should be maintained above 50 km/h.

16

3

Share

What Causes the ABS Yellow Light to Illuminate on a Car?

There are various states of the ABS light being on, with different causes and solutions for each state. The details are as follows: State 1: ABS warning light stays on (most common). Cause 1: The ABS speed sensor's sensing part is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. This prevents the ABS computer from determining the vehicle speed and the wheel slip rate, thus failing to issue appropriate commands to adjust braking. Solution: Clean the dirt from the speed sensor and adjust the gap between the speed sensor and the signal ring to restore normal function. Cause 2: Poor signal due to loose connections between system lines or poor contact of the ABS relay, leading to system failure. Solution: Check the line connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off during acceleration. Cause: When multiple vehicle electrical devices are in use, the battery voltage drops below 10.5V. The ABS warning light turns off as the engine speed increases and voltage rises. The ABS system power supply voltage is too low, possibly due to poor terminal contact or grounding issues. Solution: Check the battery's specific gravity; inspect the charging system; examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light stays on after engine start and turns off only when the engine is turned off (IGFF). Cause: Poor grounding contact of the ABS hydraulic valve body; poor contact of the ABS hydraulic valve body wiring connector; ABS computer malfunction. Solution: Loosen the grounding screw of the hydraulic valve body, then retighten it, cleaning the contact surface if necessary; check if the connector gap has widened; replace the ABS or ABS/ASR computer. State 4: ABS warning light illuminates during high-speed driving. Cause: During high-speed driving, the ABS computer detects a significant discrepancy between the rear and front wheel speed signals; incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the label near the fuel tank cap. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch; poor internal contact of the brake light. Solution: Start the engine, press the brake pedal, push the brake switch linkage down fully with a finger, then release the brake pedal to complete the self-setting position; replace the brake light switch if necessary. If the ABS warning light is on, it is advisable not to continue driving. The illuminated ABS light indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, preventing the driver from slowing down or adjusting the vehicle's trajectory, posing significant safety risks.

5

4

Share

What is the Meaning of Driving Mode?

Driving mode refers to a setting that alters throttle output ratio and shift timing through various configurations to cater to the driver's style and enhance the driving experience. Different driving modes adjust the vehicle's responses, including steering, transmission, engine, suspension, and the timing and intensity of electronic stability program intervention, based on predefined system parameters. Automotive driving modes are categorized into: 1. Normal Mode: Maintains power output while optimizing fuel efficiency; 2. Sport Mode: Activates higher engine RPMs to ensure sufficient torque for rapid acceleration and deceleration; 3. Eco Mode: Optimizes fuel injection and shift logic for economical fuel consumption.

5

0

Share

Which city in Jiangsu does the license plate 'Su F' belong to?

What are the national standards for vehicle wading?

What Does an Exclamation Mark on a BMW Mean?

What Causes the Squeaking Sound When the Car Shuts Off?

Will driving at 50 mph in third gear damage the car?

What Causes the ABS Yellow Light to Illuminate on a Car?

What is the Meaning of Driving Mode?

Why can't the foggy front windshield be wiped clean?

What does SAE stand for?

Where is the Corolla defroster switch located?

Does Burning Engine Oil Lead to Increased Fuel Consumption?