Which city does the license plate 'Ji G' belong to?

1 Answers
CarolineDella
07/30/25 12:03am
Ji G is the license plate for Baicheng City. The license plate codes for various regions in Jilin Province are as follows: Ji A - Changchun City, Ji B - Jilin City, Ji C - Siping City, Ji D - Liaoyuan City, Ji E - Tonghua City, Ji F - Baishan City, Ji G - Baicheng City, Ji H - Yanbian Korean Autonomous Prefecture, Ji J - Songyuan City. The pattern for license plates is that the first character represents the abbreviation of the province, and if the second character is 'A', it represents the provincial capital. License plates, commonly known as car plates, refer to the plates hung on the front and rear of a vehicle. They are usually made of aluminum, sheet iron, plastic, or paper, and display the vehicle's registration number, registration region, or other relevant information.
Was this review help?
17
3
Share
More Forum Discussions

How many liters of engine oil are needed for a Tianlong Renault oil change?

For the Dongfeng Tianlong with a Cummins engine, only one large barrel and one half barrel are needed, which is approximately 20 liters. For the Renault engine, two full barrels are required, totaling 32 liters. Oil change intervals: The 30-grade viscosity is higher, providing better engine protection. It can be changed after 120,000 kilometers. If driving habits are poor or there is frequent highway driving or traffic congestion, it can be changed earlier. Precautions for oil change: When changing the oil, use the oil grade specified in the vehicle's user manual and choose oil produced by reputable manufacturers. Improper use may lead to impurities in the oil clogging the cylinder block, affecting engine performance and reducing the vehicle's power output.
6
0
Share

What happens if the first point is too early when reversing into the parking space?

Reversing into the parking space too early at the first point may result in failure to enter the parking space or running over the line. Here is some relevant information about reversing into the parking space: 1. Overview: Reversing into the parking space has been a mandatory test item for obtaining a small car driver's license since 2013. It assesses the driver's ability to operate the vehicle in a confined space. Reversing into the parking space is one of the assessment points in the driver's test, which involves correctly reversing the vehicle into the garage from both sides while in motion. 2. Evaluation criteria: (1) Failing to follow the prescribed route or sequence results in disqualification. (2) Running over the line or failing to reverse into the space results in disqualification. (3) Taking more than 210 seconds to complete the reversing into the parking space results in disqualification. (4) Stopping midway deducts 5 points each time.
20
3
Share

How often should motorcycle anti-wear additives be replaced?

No need to replace. It is unnecessary to use anti-wear additives during the second maintenance, and there is no necessity even at 30,000-40,000 kilometers. Concept of the break-in period: The break-in period generally refers to the process of contact, friction, and meshing of mechanical components during initial operation. Precautions during the break-in period: Avoid emergency braking if possible: Emergency braking not only impacts the braking system during break-in but also increases the shock load on the chassis and engine. It is best to avoid emergency braking within the first 300 kilometers of driving. Avoid overloading: If a new vehicle is operated at full load during the break-in period, it can cause damage to the components. Therefore, within the first 1,000 kilometers of driving, the load should generally not exceed 75%-80% of the rated capacity.
3
2
Share

What is the function of an oil catch can?

The function of an oil catch can is to reduce the formation of carbon deposits. Below are detailed explanations about oil catch cans: 1. Principle: The oil catch can works by utilizing the negative pressure in the intake manifold to draw in blow-by gases formed in the crankcase, which are then redirected into the combustion chamber to participate in combustion again. These blow-by gases mainly consist of oil vapor and combustible gas mixtures. Since oil is viscous, if it directly enters the intake pipes, it may adhere to the inner walls of the intake pipes, potentially leading to carbon deposits and obstructing the intake. 2. Environmental protection: The engine has a Positive Crankcase Ventilation (PCV) system, which seems to only allow direct venting to the atmosphere. However, since the blow-by gases contain combustible gasoline molecules, releasing them directly into the atmosphere not only affects fuel economy but also causes more severe issues such as air pollution.
9
5
Share

Why won't the car start despite having electricity and fuel?

The reasons why a car won't start despite having electricity and fuel are as follows: Faults such as aging of distributor wires: The reason why a car won't start despite having electricity and fuel may be due to issues with the distributor wires, such as aging of the wires, incorrect order of cylinder wires, damage to the distributor, or loose spark plug caps. When starting the engine, if there is a clear sound of the starter working, it indicates that the power supply is not the issue. If the starter is functioning properly, the problem might be a blocked fuel line, preventing proper fuel supply. Certain electrical circuit issues: If there is no sound of the starter working when starting the engine, or if the sound is irregular, and the dashboard lights keep flickering, it indicates certain electrical circuit issues, possibly due to aging of the ignition coil or spark plugs.
1
1
Share

Why does a motorcycle carburetor get hot?

It is normal for a motorcycle carburetor to get hot. As the vehicle operates with continuous electrical power, the materials inside will continuously expand, causing the carburetor to heat up. Introduction to motorcycle carburetor overheating: From a performance perspective, the rise in the carburetor's own temperature can accelerate fuel evaporation, making the air-fuel mixture easier to burn. This facilitates smoother engine ignition and significantly reduces the likelihood of carbon buildup in the cylinder head, making it more beneficial than harmful. However, from a cost perspective, due to the fuel's tendency to evaporate more easily, fuel consumption may increase slightly, but that's the only downside. Normal operating temperature of a motorcycle carburetor: Heating up is normal, but if the temperature becomes excessively high, it requires inspection. The normal temperature should not exceed 40 degrees Celsius, though ambient temperature can also be a factor.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.