Which city does the license plate 'Hei N' belong to?

2 Answers
McKai
07/29/25 1:16am
Hei N is the license plate code for Heihe City. The license plate codes for various regions in Heilongjiang Province are as follows: Hei A for Harbin, Hei B for Qiqihar, Hei C for Mudanjiang, Hei D for Jiamusi, Hei E for Daqing, Hei F for Yichun, Hei G for Jixi, Hei H for Hegang, Hei J for Shuangyashan, Hei K for Qitaihe, Hei L for counties and county-level cities under Harbin, Hei M for Suihua, Hei N for Heihe, Hei P for Daxing'anling Prefecture, and Hei R for Heilongjiang Agricultural Reclamation Administration. License plates serve as identification numbers for vehicles, with the primary purpose of indicating the province, city, or county to which a vehicle belongs. Vehicle management offices can use the license plate to identify the vehicle's owner.
Was this review help?
19
5
Share
StBrynlee
08/12/25 5:25am
Having driven for many years, when I see a license plate with 'Hei N' on the road, I immediately recognize it as a plate from Heihe City. 'Hei' is the abbreviation for Heilongjiang Province, and 'N' represents the Heihe region. License plate formats are designed this way—the first character indicates the province, and the second letter specifies the city. For example, 'Hei A' is Harbin, and 'Hei E' is Daqing. As an ordinary driver, knowing a bit more about license plates is quite practical, as it helps quickly identify a vehicle's origin and reduces misunderstandings while navigating. Heihe is located in the northern part of Heilongjiang, close to the Russian border, and winters there are extremely cold. The license plate information also reflects local characteristics. I recommend that beginners check the detailed list on the official website of the vehicle management office or download a traffic app to assist with identification. Always drive safely—accumulating these small details can make driving smoother and more enjoyable. I often share these experiences on social media.
Was this review help?
20
0
Share
Expand All
More Forum Discussions

Where to Set the Ambient Lighting in BMW 5 Series?

On the central control display, select My Vehicle, then click in sequence: Vehicle Settings -- Lighting -- Interior Lighting -- Ambient Lighting. Here is more information about ambient lighting: 1. Ambient lighting is the setting for the mood lights. Ambient lighting has two options: color and brightness, corresponding to the color and brightness of the mood lights, respectively. After clicking on color, you will immediately enter the color switching interface. You can select the color by sliding up and down, and the effect will be displayed immediately after selecting the color. 2. It is a decorative lighting that can create different atmospheres with different colors, evoking different moods. 3. The essence of mood lighting is an LED linear light. Due to its flexible characteristics, it can be installed in places where mood lighting is needed. The functions of mood lighting generally include the following three points: (1) Relaxing the mood. (2) Enhancing the car's grade. (3) Creating an atmosphere.
9
2
Share

How to reset the maintenance reminder for the 2019 CR-V?

First, ensure the CR-V's power mode is in the ON position, with the vehicle completely stopped and the gear in P (Park). Press the information display button on the left side of the steering wheel, then select the clock vehicle settings display. At this point, you will see the 'Vehicle' option. Subsequently, press the vehicle maintenance information reset to complete the process. Below is more information about car maintenance: 1. Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. 2. Modern car maintenance mainly includes the maintenance scope of the engine system (engine), transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. 3. The purpose of car maintenance is to keep the car clean and tidy, maintain normal technical conditions, eliminate hidden dangers, prevent faults, slow down the deterioration process, and extend the service life.
18
0
Share

How to Use the Three Driving Modes in the 2019 Kia Sportage?

This vehicle features a drive-mode button located to the left of the gear shift lever, which serves as the driving mode selector. The available modes are Eco (Economy), Comfort, and Sport. Pressing this button allows you to switch between modes. Below is an introduction to the three driving modes in the Sportage: Eco Mode: The throttle response becomes notably sluggish, and the transmission shifts up more aggressively. Comfort Mode: The throttle response is more sensitive compared to Eco Mode. Sport Mode: The throttle response is extremely sensitive, and the engine maintains higher RPMs. The transmission only upshifts once the engine reaches the redline zone.
13
2
Share

How to Turn Off the Daytime Running Lights on the Boyue

Method to turn off the Boyue's daytime running lights: Insert the ignition key with the ignition switch in the off position, move the turn signal switch to the left turn position, pull up the high beam and hold it, then turn on the ignition switch. Hold for about 5 seconds until you hear a prompt sound, then release the ignition switch and return it to the original position. The daytime running lights will turn off. Here is more information about daytime running lights: 1. The operation method of the Boyue's daytime running lights differs from other models. When the speed is below 10km/h, you can manually turn off the daytime running lights by operating the switch. When the speed exceeds 10km/h or the driving distance exceeds 100m, the daytime running lights will automatically turn on again. 2. Daytime running lights, also known as DRLs, are installed on both sides of the front end to signal the presence of the vehicle during the day. Their purpose is to make the vehicle more noticeable to others during daytime driving. The function of daytime running lights is not to help the driver see the road but to alert others that a vehicle is approaching.
15
5
Share

Common Issues with Corolla Steering Gear?

The common issue with the Corolla is abnormal noise from the steering wheel. The main reasons are as follows: 1. The steering column lacks lubrication, resulting in high friction, insufficient lubrication at the universal joint, or rust on the steering shaft. 2. Check if the power steering fluid is low or if there is abnormal noise from the steering gear's rack and pinion. 3. Inspect the steering knuckle for any issues and check if soundproofing cotton or debris is entangled under the steering gear. 4. The rubber bushings of the suspension stabilizer bar links may have aged and hardened. 5. The steering wheel's fixing screws may not be tightened properly, causing noise; if the steering wheel has been replaced, friction between plastic parts may produce noise.
19
2
Share

Where is the thermostat located on the Mondeo 2.5?

It is located near the engine, close to the water pump. The thermostat, also known as the temperature regulator, functions by automatically adjusting the amount of coolant entering the radiator based on the coolant temperature, thereby altering the coolant circulation range to regulate the cooling system's heat dissipation capacity and ensure the engine operates within the appropriate temperature range. Below is additional information about the thermostat: 1. The car thermostat must maintain good technical condition; otherwise, it will severely affect the engine's normal operation. For example, if the thermostat's main valve opens too late, it can cause engine overheating; if it opens too early, it prolongs the engine warm-up time, resulting in the engine running too cold. 2. Methods to determine whether the thermostat is functioning properly: If coolant continues to flow from the upper water chamber inlet pipe of the radiator when the engine starts cold, it indicates that the thermostat's main valve cannot close. If no coolant flows from the upper water chamber inlet pipe when the engine coolant temperature exceeds 70 degrees Celsius, it means the thermostat's main valve cannot open properly, and repairs are needed at this point.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.