Which city does the license plate 'Hei M' belong to?

How to Replace the Air Conditioning Filter for Besturn B50?

The air conditioning filter for Besturn B50 is located inside the front storage compartment on the passenger side. Below are the steps for replacing the air conditioning filter: 1. Open the glove box, grasp both ends with both hands, and pull upwards firmly to remove the glove box. The blower is inside, and the air conditioning filter is located within; 2. Remove the cover plate to reveal the air conditioning filter; 3. Pull out the air conditioning filter; 4. Insert the new filter, paying attention to the correct orientation. Below is additional information about car filters: When driving with the air conditioning on, the car draws in external air into the cabin. However, the air contains various particles such as dust, pollen, soot, abrasive particles, ozone, odors, nitrogen oxides, sulfur dioxide, carbon dioxide, benzene, etc. Without an air conditioning filter to remove these particles, they can enter the cabin, not only contaminating the car's air conditioning system and reducing the cooling system's performance but also causing allergic reactions, lung damage, irritation from ozone exposure, and discomfort from odors, all of which can affect driving safety.

14

0

Share

Which button is for the heater in a car?

Different cars have the heater button in different locations. Taking Volkswagen as an example, the heater button in Volkswagen cars is the temperature adjustment knob, which is a round knob. Rotate the knob to the high-temperature indicator area to deliver warm air. When turning on the heater, make sure to turn off the A/C switch. Correct usage of the car heater: 1. When driving in the morning during winter, do not turn on the heater immediately after starting the engine, as the engine is still cold and cannot produce warm air. Instead, warm up the car first and wait until the engine or coolant temperature rises before turning on the heater. 2. Another important point is not to press the A/C button when using the heater in winter, as this controls the car's air conditioning compressor. The heater utilizes residual heat from the engine cooling system and does not require the compressor to produce warm air. Pressing the A/C button while using the heater will only increase fuel consumption. 3. Additionally, prolonged use of the heater can cause fogging on the windshield. The correct approach is to direct the warm air from the heater toward the windshield. In winter, prolonged use of the heater can also cause dizziness among passengers due to poor air circulation. Therefore, slightly open the windows to allow fresh air to circulate.

3

4

Share

How to Add Windshield Washer Fluid to Audi Q5

The windshield washer fluid reservoir in the Audi Q5 is located on the rear side of the engine hood pressure strut, with its cap marked by a washer symbol as shown in the illustration. The Audi Q5's windshield washer fluid capacity is 5 liters, and it should be refilled appropriately based on the remaining amount. Windshield washer fluid is a consumable item without a fixed refill cycle, depending on the frequency of the owner's usage. The steps for adding windshield washer fluid are as follows: 1. Turn on the wiper operation switch, and the windshield washer fluid will spray from below the front windshield. 2. Continue until the spray nozzles stop spraying, then open the windshield washer fluid filler cap and add a small amount of new washer fluid. 3. Turn on the wiper operation switch again to flush out the remaining old washer fluid. 4. When no more fluid sprays out from the nozzles the second time, add approximately 4 liters of washer fluid. Finally, securely close the washer fluid cap to complete the refilling process.

11

0

Share

How to Measure the Condition of a Car Battery?

Methods for measuring the condition of an electric car battery are as follows: 1. Judging by the external packaging of the battery: (1) Check if the outer packaging is damaged or has been opened. (2) Inspect the appearance of the battery itself for any scratches or rust on the positive and negative terminal connections. (3) Check if there is an anti-counterfeit label on the battery casing, whether the production date is relatively old, if the manufacturer's information and markings are complete, and if the writing is clear and legible. 2. Testing the battery's quality during a trial run—install the freshly charged battery onto the electric vehicle, start the vehicle's power, and suddenly accelerate while riding to observe the changes in the power gauge needle: (1) If the needle drops less than half a division during acceleration, the battery is judged to be new or in good condition. (2) If the needle drops by 1 or even 2 divisions during acceleration, the battery is judged to be old or of poor quality. (3) If the needle drops by 3 or even 4 divisions during acceleration, the battery is judged to be a refurbished product from a scrapped battery masquerading as new, indicating extremely poor quality.

18

1

Share

Can You Keep Driving When the AT Temperature is High?

No, you cannot. High engine coolant temperature is most common in summer. If the engine temperature becomes too high, you must immediately find a safe place to pull over. If you are on a highway or a ring road, remember to place a warning sign behind your vehicle to alert oncoming traffic and avoid secondary accidents. Here is some relevant information: 1. Engine: An engine is a machine that converts other forms of energy into mechanical energy, including internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, electric motors, etc. For example, an internal combustion engine typically converts chemical energy into mechanical energy. 2. Layout of Internal Combustion Engines: The engine can be said to be the most important part of a car, and its layout has a significant impact on the vehicle's performance. For passenger cars, the engine's placement can be simply divided into front-engine, mid-engine, and rear-engine configurations. Currently, most models on the market use a front-engine layout, while mid-engine and rear-engine layouts are only used in a few performance sports cars.

8

3

Share

Can You Stop During Subject Two Driving Test?

Yes. In the C1 Subject Two driving test, stopping is allowed as long as it's not an illegal parking. The C1 Subject Two test includes five mandatory items: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves (commonly known as S-curves). Some regions may also include a sixth item: highway toll card collection. Skills to Master: The test requires candidates to grasp basic driving operation essentials and possess fundamental vehicle control abilities. They should be proficient in basic methods of driving on designated courses and roads within the test area, capable of properly using vehicle controls and accurately managing the vehicle's spatial position, including precise control over the vehicle's location, speed, and route. Parallel Parking: Parallel parking generally refers to parking alongside the curb. It is one of the test items in the Subject Two driving test. Parallel parking has become increasingly common in urban areas, especially as parking spaces in formal parking lots become more scarce. Many places have designated parking spaces along the sides of streets, known as 'parallel parking spaces.'

17

4

Share

Which city does the license plate 'Hei M' belong to?

How to Replace the Air Conditioning Filter for Besturn B50?

Which button is for the heater in a car?

How to Add Windshield Washer Fluid to Audi Q5

How to Measure the Condition of a Car Battery?

Can You Keep Driving When the AT Temperature is High?

Can You Stop During Subject Two Driving Test?

What engine does the BMW M4 use?

How to Tell if a Car Has Been Flooded?

What is the National V Standard Logo?

Does exceeding 30 days without license plate registration after vehicle transfer have any impact?