···
Log in / Register

Which cities do the license plates Ji A, B, C, D, E, F, G, H belong to?

3 Answers
StRicardo
09/07/25 3:56am
Ji A, B, C, D, E, F, G, H represent Shijiazhuang, Tangshan, Qinhuangdao, Handan, Xingtai, Baoding, Zhangjiakou, and Chengde respectively. The first character of a license plate is a Chinese character, representing the abbreviation of the province where the vehicle is registered; the second is an English letter, representing the code of the prefecture-level city where the vehicle is located. License plates are plates mounted on the front and rear of a vehicle, typically made of aluminum, sheet metal, plastic, or paper, inscribed with the vehicle's registration number, registration area, or other relevant information. License plates serve as a numbering and information registration system for vehicles, primarily allowing identification of the vehicle's registered region and enabling the lookup of the vehicle's owner and registration details based on the plate.
Was this review help?
2
5
Share
Kent
09/19/25 3:22am
I'm a seasoned driver from Hebei, having driven trucks all over the province, and I'm very familiar with the license plate codes. Ji A definitely belongs to the provincial capital Shijiazhuang, the economic hub with heavy traffic; Ji B represents Tangshan, where there are many steel plants and frequent vehicle movements; Ji C is Qinhuangdao, near the coast where tourist plates are common; Ji D for Handan, Ji E for Xingtai, Ji F for Baoding, Ji G for Zhangjiakou, Ji H for Chengde, each city clearly distinguished. For example, vehicles from Chengde's Summer Resort have Ji H plates. The zoning rules are quite reasonable, covering all directions of Hebei. On the highway, you can tell where a vehicle is from just by looking at the plate, avoiding wrong turns, and sometimes even chatting with fellow locals about regional specialties, like Baoding's rich pancake culture.
Was this review help?
1
1
Share
Expand All
Reid
11/02/25 3:44am
I often go on self-driving trips, and remembering license plates has been a great help. The license plates in Hebei Province are straightforward: Ji A for Shijiazhuang, Ji B for Tangshan, Ji C for Qinhuangdao, Ji D for Handan, Ji E for Xingtai, Ji F for Baoding, Ji G for Zhangjiakou, and Ji H for Chengde. Young car enthusiasts often share these during gatherings, such as spotting many Ji G plates at ski resorts in Zhangjiakou. The regional division makes it easier to identify vehicles on the road and adds interesting anecdotes to travel plans, helping to avoid unnecessary detours in urban areas.
Was this review help?
1
1
Share
Expand All
More Forum Discussions

Why is the engine speed high when the car just starts?

It is normal for the engine speed to be high during startup. When starting a cold engine, the car requires higher RPM to quickly bring the engine to its normal operating conditions. This necessitates a richer air-fuel mixture, leading to increased air intake and fuel injection, which results in higher engine speed. Once the engine reaches its normal operating conditions, the RPM will drop to the normal range. The reasons for high engine speed are as follows: Transmission failure: This could be due to the transmission computer forcing a downshift or internal transmission issues; Insufficient engine output power: The engine speed relates to the number of work cycles per unit time or the effective power output of the engine, meaning the effective power varies with different RPM levels. The operating condition of the engine at its rated power and rated speed is referred to as the rated condition.
16
1
Share

What is the engine oil specification for the Geely Bin Yue?

The 'W' in the engine oil specification stands for WINTER. The number before 'W' indicates the viscosity of the oil at low temperatures. A smaller number means better low-temperature fluidity, which provides better engine protection during cold starts. The number after 'W' represents the viscosity of the oil at 100 degrees Celsius. A higher number indicates higher viscosity, offering better engine protection at high temperatures. The functions and classifications of engine oil are as follows: Functions of engine oil: Engine oil lubricates the engine, reduces friction, aids in cooling, and minimizes buffering. It helps reduce wear on engine components and extends their service life. Classifications of engine oil: Engine oils on the market are divided into synthetic oils and mineral oils. The replacement interval for full synthetic oils is longer than that for semi-synthetic and mineral oils. If a car uses synthetic oil, the replacement interval can be extended by approximately 20,000 kilometers compared to using mineral oil.
20
0
Share

Can a Broken Car Remote Key Be Repaired?

As long as the chip is not damaged, a broken car remote key can be repaired. The following are the reasons and solutions for car remote key failure: Dead Battery: A dead car battery can prevent the vehicle from receiving signals, and a dead remote key battery can make it impossible to unlock the doors. The solution is to recharge the car battery promptly. Remote Control Malfunction: If there are high-power radio signals of the same frequency nearby, the vehicle's signal receiver may fail to detect the radio-encoded commands from the remote key, leading to remote control failure, such as inability to lock or unlock the doors. The solution is to move away from areas with potential signal interference.
17
2
Share

What are the differences between semi-synthetic and mineral engine oils?

Mineral engine oil is directly refined from petroleum and then manufactured by adding additives, while semi-synthetic engine oil is extracted through hydrocracking technology based on mineral oil. The specific differences are as follows: Price difference: Mineral engine oil is cheaper than synthetic engine oil. Semi-synthetic engine oil is of a higher grade than mineral engine oil, and its purity is closer to that of fully synthetic engine oil. Performance difference: Mineral engine oil has poorer lubricity compared to synthetic engine oil. Engine noise: Engines using mineral engine oil produce weaker sounds compared to those using synthetic engine oil. Power output: In the initial stages of use, the difference between mineral engine oil and synthetic engine oil is minimal, but the advantages and disadvantages become more apparent over time.
13
3
Share

What material is the automotive half shaft made of?

Automotive half shaft refers to the drive axle, and its material is 40Cr. The following is an introduction about 40Cr: Introduction to 40Cr: 40Cr is a standard steel grade in China's GB standards. 40Cr steel is one of the most widely used steels in the machinery manufacturing industry. After quenching and tempering, it exhibits excellent comprehensive mechanical properties, good low-temperature impact toughness, and low notch sensitivity. Properties of 40Cr: After quenching and tempering, this steel is used to manufacture mechanical parts that bear medium loads and operate at medium speeds, such as automotive steering knuckles, rear half shafts, as well as gears, shafts, worms, spline shafts, and center sleeves on machine tools.
8
1
Share

What happens if you pull the electronic handbrake while driving?

If you pull the electronic handbrake while driving, the car will rapidly decelerate along its current trajectory until it comes to a complete stop. This ensures the safety of passengers in emergency situations. The electronic handbrake features an automatic braking safeguard function. Activating it during driving does not necessarily trigger emergency braking or cause the rear wheels to lock immediately. Instead, the electronic handbrake adjusts braking force to all four wheels based on the vehicle's speed until the car stops. When the electronic handbrake is engaged during driving, the throttle may also be immediately cut off by the system. Therefore, in situations requiring emergency stops (such as sudden obstacles ahead), pulling the electronic handbrake can be an alternative to slamming the foot brake, as it prevents passengers from lurching forward due to inertia. However, proper estimation of the vehicle's stopping distance is still crucial.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.