Which Changan models feature automatic parking?

What to Do When Music Won't Play via Bluetooth Connection in the Car?

If music won't play via Bluetooth in the car, you need to set the audio source to Bluetooth to enable music playback. Relevant information is as follows: 1. Introduction to Car Bluetooth: Car Bluetooth is a feature equipped in many vehicles. After connecting your phone via Bluetooth, you can play music from your phone and even answer calls directly, which is very convenient. If music doesn't play after connecting via Bluetooth, it means the car's multimedia system audio source is not set to Bluetooth. 2. Explanation: Many cars come with a car connectivity system that allows the owner's phone to connect with the car's infotainment system, enabling more functionalities. Many vehicles are factory-equipped with either Carlife or CarPlay systems—Carlife is specifically designed to connect with Android phones, while CarPlay is tailored for iPhones.

14

0

Share

How to Reset the Lexus Tire Pressure Monitoring Light?

If the tire pressure light on your Lexus remains illuminated, you can reset it by adjusting the tire pressure, turning on the vehicle's power, pressing the SET button for three seconds, and then turning off the power. Below is some information about tire pressure: 1. Low pressure: This can increase tire deformation, lead to cracks on the tire sidewalls, and cause excessive flexing, resulting in overheating, rubber aging, fatigue in the cord layers, and cord breakage. It also increases the tire's contact area with the ground, accelerating wear on the tire shoulders. 2. High pressure: Excessive pressure can overstretch the tire cords, reducing the tire's elasticity and increasing the load on the vehicle while driving. This may cause internal cracks or even blowouts upon impact. Additionally, high pressure accelerates tread wear and reduces puncture resistance.

9

5

Share

What is the fuel consumption of Haojue USR125?

The average fuel consumption of Haojue USR125 is 2.36L/100km. The factors affecting fuel consumption and methods to reduce it are as follows: Factors affecting fuel consumption: Poor driving habits such as aggressive lane changing, sudden stops and starts, and driving at high speeds in low gears can increase fuel consumption. Carbon buildup in the engine can also lead to higher fuel consumption. Low tire pressure and insufficient tire inflation can cause the vehicle to consume more fuel. It's advisable to check tire inflation before driving, and use a pressure gauge to monitor tire pressure. Properly inflating the tires can help reduce fuel consumption. An overloaded trunk: Carrying too many items in the trunk can also increase the vehicle's fuel consumption. Methods to reduce fuel consumption: Maintain a steady speed while driving, avoid sudden braking and acceleration, and perform regular vehicle maintenance.

9

3

Share

Do You Need to Wait for a Red Light When Turning Right?

When the traffic light is fully red or there are no other auxiliary signs, you do not need to wait for the red light to turn right. However, if there is an arrow-type signal, you must wait for the red light to turn right. According to Article 38 (3) of the 'Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China,' 'When the red light is on, right-turning vehicles may proceed provided they do not hinder the passage of released vehicles or pedestrians.' This means that, except for a red right-turn arrow signal, you can turn right during a red light as long as it does not hinder the passage of released vehicles or pedestrians. Precautions for turning right during a red light: The vehicle must be in the right-turn lane. When turning right, the vehicle must use the corresponding right-turn lane. If you turn right during a red light while in a straight or left-turn lane, it will be considered running a red light. What if the road has no lane markings? Then, you must wait for the traffic light. Here’s a reminder: the far-right area of the road is not necessarily the right-turn lane. Before turning right, always observe your surroundings and follow the signs or markings to find the correct right-turn lane. Always check the traffic light and observe the signs. If the vehicle encounters a circular red light and there are no signs or arrow signals prohibiting a right turn, you can turn right during the red light. However, if there is a sign or signal prohibiting a right turn, proceeding will still be considered running a red light. As for arrow traffic lights, you can only turn right when the right-turn arrow is green. Yield to pedestrians. If you encounter pedestrians or vehicles going straight or turning left, you must yield; otherwise, the right-turning vehicle will be fully responsible for any accident.

18

5

Share

What Causes the Squeaking Noise When New Wiper Blades Are Used?

The squeaking noise when new wiper blades are used can be attributed to issues with the wiper blades themselves, foreign objects between the wiper blades and the windshield, or problems with the linkage mechanism. Issues with the wiper blades themselves: Wiper blades are made of rubber and can harden or deteriorate over time, especially in winter. If they no longer clean effectively, the simplest and most effective solution is to replace them with new ones. Foreign objects between the wiper blades and the windshield: When the wipers are turned on, a sharp friction noise may occur between the blades and the windshield. The owner can inspect and clean any debris under the wiper blades to ensure they remain clean. Linkage mechanism: Deformation of this mechanism or issues with the motor and interval relay (such as operating too fast, too slow, or continuously) can cause abnormal noises. Additionally, prolonged use may lead to deformation, stiffness, rust, or other operational anomalies in the mechanism itself. If the wiper blades are newly replaced, it is advisable to check for dirt or oil residues on the windshield and clean it with a cleaning solution or try another new set of blades. If the noise persists, adjust the angle of the wiper arm using tools like pliers. However, it is recommended to visit a repair shop for professional adjustment with specialized tools.

20

1

Share

What is a Streaming Media Rearview Mirror?

A streaming media rearview mirror transforms the traditional interior rearview mirror into a real-time display of the rear traffic conditions. A high-definition external rearview camera captures the scene behind the vehicle and projects the image onto the mirror. Since the image is entirely captured by the external camera, it eliminates irrelevant objects such as the rear seats and headrests inside the car, providing a clear, real-time view of the traffic behind. This feature ensures that drivers receive a clearer image even in poor lighting conditions or when the rear view is obstructed, significantly enhancing driving safety. Disadvantages of streaming media rearview mirrors: Some brands' cameras lack waterproof coatings, and if covered by mud or dirt during rain, it may compromise driving safety.

13

3

Share

Which Changan models feature automatic parking?

What to Do When Music Won't Play via Bluetooth Connection in the Car?

How to Reset the Lexus Tire Pressure Monitoring Light?

What is the fuel consumption of Haojue USR125?

Do You Need to Wait for a Red Light When Turning Right?

What Causes the Squeaking Noise When New Wiper Blades Are Used?

What is a Streaming Media Rearview Mirror?

Can a Bulging Tire Still Be Used?

How Many Minutes Should a Car Warm Up?

What Does the Oil Grade Mean?

How to Use Cruise Control in Chevrolet Malibu?