Which cars have the gear lever on the center console?

1 Answers
ZoeRose
07/30/25 2:37am
Cars with the gear lever on the center console include: Mercedes-Benz Vito, Volkswagen Multivan, Buick GL8, Chrysler Grand Voyager, Honda Odyssey, and Picasso, among others, typically found in MPV models. The reasons for designing the gear lever on the center console: 1. To increase space utilization; 2. To facilitate driver operation. Taking the Buick GL8 as an example, it is a model under SAIC General Motors. In terms of body dimensions, its length, width, and height are 5213mm, 1847mm, and 1745mm respectively, with a wheelbase of 3079mm. Design elements of the Buick GL8, such as the three-dimensional straight waterfall grille, multi-dimensional blue Bi-Xenon HID headlights, 360-degree wraparound interior design, and ice-blue ambient lighting, all inherit the design language of the Buick family.
Was this review help?
1
4
Share
More Forum Discussions

Which subject needs to be retaken if all points are deducted?

If all points on your driver's license are deducted, you need to retake Subject 1. If the accumulated demerit points reach 12 within a scoring cycle, you are required to study Subject 1 and take the Subject 1 exam. Passing the exam will clear the demerit points. The following are precautions regarding driver's license point deductions: Clearance Cycle: The cumulative scoring cycle for road traffic safety violations is 12 months, with a full score of 12 points. It is calculated from the date the motor vehicle driver's license is initially issued and continues in cycles. Difference Between 12 and 24 Points: Within a scoring cycle, if you accumulate 12 points, you need to restudy Subject 1; if you reach 24 points, you not only have to study Subject 1 but also Subject 3.
7
2
Share

What Causes the Misfire Fault in the Envision?

Misfire faults in the Envision can be divided into two scenarios: complete misfire, where there is no combustion at all, and partial misfire, where combustion is unstable. It is advisable to promptly visit a repair shop for maintenance. Causes of engine misfire: Issues with spark plugs, such as clogging or damage. Problems with cylinder wires. Faulty ignition coils. Problems with fuel injectors, including clogging or low voltage causing DME internal injector data loss. Issues with the air-fuel mixture. Problems with cylinder pressure. Solutions for engine cylinder misfire: Measure engine cylinder pressure using a cylinder pressure gauge for easy detection. Changes in valve spring stiffness and camshaft wear are difficult to detect during cylinder pressure measurement. Also, consider whether the intake air volume is sufficient (air leakage or carbon buildup on valves).
14
5
Share

Are there still new Tianjin Honda 90 motorcycles available?

Tianjin Honda 90 has been discontinued for 20 years, and there are currently no new models available on the market. Below is extended information about motorcycle maintenance: Maintenance of braking system: With the main stand deployed, measure the free travel distance of the front brake lever from its resting position to the point where braking begins (10-20mm). If not within specification, adjust by turning the front brake nut clockwise to reduce free travel or counterclockwise to increase it. Fine adjustments can also be made using the front brake fine-tuning nut. Motorcycle fuse replacement: The fuse is located next to the battery. Always replace with a fuse of identical specifications. Frequent fuse burnout usually indicates short-circuiting or overload - consult a technician for inspection. Using non-compliant fuses may cause severe electrical system damage or even fire. When inspecting/replacing fuses, always turn the ignition switch to OFF position to prevent short-circuiting.
6
2
Share

Apply Window Tint First or Register the Vehicle First?

Generally, it is recommended to register the vehicle first before applying window tint. While it is permissible to tint windows before registration, the film must comply with technical standards. Below are more relevant details: Tinting regulations: The driver's compartment must ensure unobstructed forward and side visibility. The visible light transmittance of the windshield and side windows in the driver's line of sight must not be less than 70%. The use of mirror-reflective sunshade films on any window is prohibited. Documents and procedures for new vehicle registration: The following documents and materials are required for new vehicle registration: ID card, vehicle certificate of conformity, vehicle parameter sheet, duplicate and quadruplicate copies of the vehicle invoice, vehicle purchase tax, vehicle insurance policy, purchase invoice, vehicle certificate of conformity, ID card or organization code certificate of the invoice issuer and its copy, compulsory traffic insurance policy, tax payment certificate, and for non-locals, a temporary residence permit is also required.
11
5
Share

What lights to use when driving at night under poor lighting conditions without street lights?

When driving at night on roads without street lights or under poor lighting conditions, high beams should be turned on. Here are relevant introductions: Light usage: Automotive high beams are generally suitable for motor vehicles driving at night on roads without street lights or with poor lighting, such as on dimly lit national highways or expressways. In urban areas where lighting is good, low beams must be used. Related light switching: When driving at night without street lights under poor lighting conditions (use low beams), when driving closely behind another vehicle in the same direction at night (use low beams), when passing over an arch bridge or pedestrian crossing at night (alternate between low and high beams), when passing through an intersection without traffic signals at night (alternate between low and high beams), when passing through sharp curves or slopes at night (flash between low and high beams twice consecutively).
8
3
Share

What Lights to Use When Driving in Poor Nighttime Lighting Conditions?

When driving at night on roads without streetlights or under poor lighting conditions, high beams should be used. Here are the relevant details: Light Usage: High beams are generally suitable for motor vehicles driving at night on roads without streetlights or under poor lighting conditions, such as on poorly lit national highways or expressways. In urban areas with good lighting, low beams must be used. Related Light Changes: Motor vehicles should use low beams when passing through intersections controlled by traffic signals at night; when driving at night without streetlights or under poor lighting conditions equivalent to low visibility, headlights, clearance lights, and tail lights should be turned on.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.