Which Cars Have Four-Wheel Independent Suspension?

2 Answers
StRhett
07/29/25 1:42am
Cars equipped with four-wheel independent suspension systems include the Dongfeng Honda Civic, FAW-Volkswagen Sagitar, FAW-Volkswagen Golf 1.4T models, and Changan Mazda Axela. Below is a detailed introduction to automobile independent suspension: 1. Overview: In an independent suspension system, each wheel on either side is individually suspended under the frame or body via an elastic suspension system. Depending on their structural forms, independent suspension systems can be further categorized into transverse arm type, longitudinal arm type, multi-link type, candle type, and MacPherson suspension systems. 2. Function: It can absorb road vibrations, ensuring the car remains stable at high speeds. Additionally, due to the absence of connecting axles, it can lower the height of the engine and the cabin, increasing the space in the passenger compartment and trunk. Currently, most cars adopt independent suspension systems.
Was this review help?
12
4
Share
CoreyLynn
08/12/25 5:47am
I've test-driven several cars and noticed that many sedans now feature four-wheel independent suspension systems, which make the ride exceptionally comfortable. For example, popular midsize cars like the Toyota Camry and Honda Accord have suspension designs that allow each wheel to absorb shocks independently, reducing vibrations significantly when driving over bumpy roads. Many SUVs also adopt this setup, such as the Honda CR-V and Ford Edge, providing stable performance even in off-road conditions. Luxury brands like the BMW 3 Series and Mercedes-Benz C-Class have more refined suspension tuning, making high-speed cornering more controlled. Even compact cars like the Mazda 3 perform well, offering greater agility in congested urban traffic. The benefits include improved handling and ride comfort, especially enhancing safety during rainy conditions or at high speeds. Personally, I believe prioritizing this type of suspension when choosing a car is very practical for daily driving.
Was this review help?
8
0
Share
Expand All
More Forum Discussions

Where to Place the Jack When Changing a Tire on a Santana?

When changing a tire on a Volkswagen Santana, the jack needs to be placed at the vehicle's support points. These points are generally located on the inner side of the side skirts (approximately 20cm behind the front wheel and 20cm in front of the rear wheel). However, it is crucial not to place the jack directly on the steel plate of the chassis, as this can easily damage the plate. Below is some information about the Volkswagen brand: 1. Volkswagen: Volkswagen (German: Volkswagen) is an automobile manufacturing company headquartered in Wolfsburg, Germany, and is the core enterprise of the Volkswagen Group, one of the world's four largest automobile manufacturers. Currently, it offers a series of products including the Lavida, Tiguan, Santana, Passat, and the Skoda brand. 2. Brand History: FAW-Volkswagen Automotive Co., Ltd. (referred to as FAW-Volkswagen) was established on February 6, 1991. It is a large passenger vehicle production enterprise jointly operated by China FAW Group Corporation, Volkswagen AG, Audi AG, and Volkswagen (China) Investment Co., Ltd. It is China's first modern passenger vehicle industrial base built according to economic scale.
14
1
Share

What is the recommended tire pressure for the Wuling Hongguang Mini EV?

The normal tire pressure for cars generally ranges between 2.2 and 2.5 bar. The appropriate tire pressure needs to be adjusted according to factors such as season, load conditions, and road conditions. The standard pressure can usually be found in the vehicle's user manual. Measure tire pressure after the tires have cooled down: Tire pressure is greatly affected by temperature. If the vehicle has been driven for a while, the measured tire pressure value will be highly inaccurate. It is essential to let the tires cool completely before measuring. The best time to measure is usually in the morning, after the vehicle has been parked overnight and the tire temperature has fully dropped. Choose an accurate tire pressure gauge: Many tire pressure gauges sold on the market today are inaccurate and of poor quality, resulting in readings that are either too high or too low. It is advisable to purchase a branded, genuine tire pressure gauge, even if it is more expensive. If you find it difficult to read the dial on a standard tire pressure gauge, you can opt for a digital one, which provides clear and immediate readings of the tire pressure.
13
4
Share

What is the fuel tank capacity of the new Mondeo in liters?

The 2021 Nissan Teana comes in 6 models, all with a fuel tank capacity of 61.3 liters. The vehicles are equipped with either a 2.0L turbocharged or naturally aspirated engine, and all models feature an 8-speed continuously variable transmission (CVT). All variants are front-wheel drive. In the same class, the 2022 Honda Accord 260TURBO Comfort Edition has a fuel tank capacity of 56 liters, while the 2021 Teana 2.0L XE Fashion Edition holds 55 liters. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the manufacturer's specified tank capacity is measured from the tank bottom to the safe fill level, with additional space remaining from the safe level to the tank opening. This space accommodates fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual fuel quantity may exceed the nominal tank capacity. To check remaining fuel, drivers can observe the fuel gauge on the right side of the instrument panel, marked with E (empty) and F (full). When the needle approaches E, it indicates low fuel, while nearing F signifies sufficient fuel levels.
16
2
Share

Why does the air conditioning pressure switch of the new Santana keep burning out?

Car air conditioning pressure switches are essential control components that ensure the proper operation of the car's air conditioning refrigeration system. Pressure control can be categorized into high, medium, and low levels, and further divided into 2, 3, or 4-wire configurations. High and low-pressure switches control the start and stop of the compressor when abnormal pressure occurs in the system. The control range of the high-pressure switch is generally between 15-26 bar, while the low-pressure switch operates within 0-4 bar. The medium-pressure switch, typically set at 17 bar, controls the high and low speeds of the condenser fan. Below is additional information on air conditioning pressure: 1. Pressure temperature sensor: This refers to a sensor that can detect temperature and convert it into an available output signal. Temperature sensors are the core components of temperature measurement instruments and come in a wide variety. Based on measurement methods, they can be divided into contact and non-contact types, and according to sensor materials and electronic component characteristics, they are classified into thermal resistors and thermocouples. 2. Loss of protection: If the high-pressure switch loses its protective function, the system may experience issues such as pipe bursts, belt slippage, and engine stalling. If the low-pressure switch fails, in cases of system leakage, foreign objects or water may enter the system, causing irreversible damage to the refrigeration system.
2
3
Share

Where is the chassis number of Pagani?

Pagani's chassis number is generally located at the lower left corner of the front windshield, or on the driver's side door hinge pillar, door lock pillar, door edge, and may also be found in the engine compartment. The specific location varies depending on the model. The chassis number is also known as the VIN (Vehicle Identification Number) code. VIN is the abbreviation for Vehicle Identification Number. Below is an introduction to the automotive VIN code: 1. Composition of the VIN code: The VIN code consists of 17 characters (including English letters and numbers), commonly referred to as the seventeen-digit code. It is a unique set of characters assigned by the manufacturer to identify a vehicle. The generation of this number follows specific rules, corresponding uniquely to each vehicle and ensuring no duplication worldwide within fifty years. Therefore, it is often referred to as the car's ID. 2. Regulations related to the VIN code: Governments and automotive companies have specific regulations for the 17-digit identification code of vehicles produced in their country or by their company. Technical regulations in various countries generally stipulate only the basic requirements for the vehicle identification code, such as it should consist of 17 digits, with specific dimensions, writing forms, arrangement positions, and installation positions for letters and numbers. Except for mandatory regulations on the meaning of certain symbols, others are not strictly regulated and are left to the manufacturer's discretion. The vehicle identification code often contains information about the vehicle's manufacturer, production year, model, body type, engine, and other equipment.
5
1
Share

What are the dimensions of the Front Lander in terms of length, width, and height?

Toyota Front Lander measures 4740/1855/1660 mm in length, width, and height respectively, with a wheelbase of 2690 mm. Appearance of the Front Lander: Unlike the Corolla Cross, the Front Lander adopts the exterior styling kit of the Japanese version Corolla Cross. The front bumper, along with the large grille, features a narrow strip around the emblem. The base model does not come with full LED headlights, while the high-end model's headlight housing includes an LED strip dividing the upper and lower sections. Additionally, the vehicle offers optional black roof and silver trim for added personality. Built on the TNGA-C platform, the Front Lander is positioned as an entry-level compact SUV with body dimensions of 4485/1825/1620 mm and a wheelbase of 2640 mm, showcasing rich side profile lines. Powertrain of the Front Lander: Under the hood, the Front Lander is equipped with the class-leading TNGA 2.0L Dynamic Force Engine paired with a Direct Shift-CVT transmission, forming a golden powertrain combination. It delivers a maximum power of 126 kW with a combined fuel consumption of just 5.8L/100km, balancing strong performance with low fuel consumption.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.