Which cars have a ram head logo?

What to Do When It Rains Heavily After Car Tinting?

Rain after car tinting has no effect because the film is applied to the inside of the car. As long as you don't open the windows, the rain won't reach the film. Additionally, after the film is applied, you should not open the windows for 48 hours. Below are some precautions to take after tinting: 1. Do not open the side windows for 48 hours after tinting; 2. Do not use solutions containing alcohol or ammonia to clean the tinted film; 3. If there are bubbles, they must be addressed at the tinting shop within 24 hours—do not attempt to fix them yourself; 4. Avoid placing adhesive labels directly on the tinted film; 5. You can clean the film after 2-3 weeks using a lint-free towel or other soft materials—do not use stiff brushes or hard objects to avoid scratching the film; 6. After tinting, there may be fogging between the glass, which is normal and will disappear within 2-3 weeks.

19

4

Share

What is the list of Zhejiang license plate numbers?

Introduction to the list of Zhejiang license plate numbers is as follows: Hangzhou City (Zhe A), Ningbo City (Zhe B), Wenzhou City (Zhe C), Shaoxing City (Zhe D), Huzhou City (Zhe E), Jiaxing City (Zhe F), Jinhua City (Zhe G), Quzhou City (Zhe H), Taizhou City (Zhe J), Lishui City (Zhe K), Zhoushan City (Zhe L). The extended introduction of Zhejiang license plate numbers is as follows: Zhejiang license plate numbers are arranged clockwise from the provincial capital in alphabetical order. Previously, the starting numbers following each letter were also sorted clockwise from the regional capital. Due to insufficient number resources in some counties and cities and idle resources in others, and now with the introduction of personalized license plates, there is no numerical sorting.

16

5

Share

How to Check if a Car Has Been in an Accident

To determine whether a car has been in an accident, you can start by observing whether the gaps between the body panels are uniform and consistent, and whether the side body lines are smooth. If you notice that the waistline is noticeably uneven, you can conclude that the car has been involved in a collision, and a relatively severe one at that. Here are specific steps to check if a car has been in an accident: 1. Inspect the A, B, and C pillars and seals: Open the car door and pull down the original factory door seal. The door frame and pillars should be straight. Pay special attention to the original factory weld points where the A, B, and C pillars meet the car body—they should be slightly rounded and slightly recessed. The lines extending from the roof to the sill should be straight and naturally curved. If you find it difficult to close the door or notice gaps when opening it, this indicates that the door has been removed before, and the car is definitely an accident vehicle. Such a car should not be purchased. 2. Check the side fenders: When inspecting the engine, it’s not enough to just see if the layout is neat. Focus on whether the screws on both side fenders have been replaced, whether the original weld points are intact, and whether the surface of the anti-collision beam is smooth. If the anti-collision beam is deformed or the surface is uneven, the car is likely a rear-end collision vehicle. 3. Examine the glass: The front and rear windshields and the four door glasses should normally be consistent. If the dates on them don’t match, the car may have had its glass replaced due to a major accident. 4. Look at the bumper: Areas like the bumper, which are prone to scratches, are most likely to have been repainted. However, because this part has a relatively large recoverable deformation, minor scratches may not show wrinkles after repair. Moreover, if the scratches are shallow and don’t expose the primer, polishing can restore them to their original condition.

14

2

Share

Where is the Van's Radiator Located?

The van's radiator is located at the front of the vehicle. The radiator must be positioned at the front to utilize airflow for cooling. Below is additional information: 1. Vehicles use water-cooled engines, which rely on coolant circulating within the engine to dissipate heat. The coolant also needs to be cooled, and this is the function of the radiator. Radiators are installed at the front of the vehicle so that they can utilize airflow to cool the coolant. 2. The coolant follows two circulation paths within the engine: a major cycle and a minor cycle. When the engine is first started and has not yet reached its normal operating temperature, the coolant circulates in the minor cycle, allowing the engine to warm up quickly. During the minor cycle, the coolant does not pass through the radiator. Once the engine reaches its normal operating temperature, the coolant begins the major cycle. In the major cycle, the coolant flows through the radiator, ensuring that the coolant temperature remains within a reasonable range.

1

Share

What to Do When the Fuel Gauge Doesn't Move After Refueling?

The fuel gauge not moving could be due to the following reasons: 1. First, check if the battery has power; if the gear display and headlights are working, the battery is fine. 2. If there is power, check the fuel level sensor, commonly known as the fuel float. Short-circuit the two wires of the float with a conductor; if the fuel gauge responds, the issue is with the float. 3. At the very top of the fuel float, there is a small chip sensor. Poor fuel quality might cause the gold contacts to become dirty, requiring cleaning with an eraser. 4. After removing the instrument panel, use a multimeter and a pin to locate and test the wiring corresponding to the fuel gauge on the panel. Solutions for a non-moving fuel gauge are as follows: 1. If the fuel gauge suddenly drops to zero in a new car, it indicates a sensor issue, and you can directly contact the 4S store for a replacement. 2. For older cars, timely cleaning is necessary. Since gasoline contains many impurities, the fuel level sensor, constantly immersed in it, can become contaminated over time, directly affecting the accuracy of the readings. 3. Poor fuel quality can also cause the car's fuel gauge to be inaccurate. Choosing cleaner gasoline can reduce the accumulation of impurities in the fuel tank, thereby minimizing the occurrence of a non-moving fuel gauge.

20

3

Share

What does the AC button mean?

The A/C button in a car is the switch for the vehicle's air conditioning compressor, and its function is to control the turning on and off of the vehicle's compressor. The cold air for the car's air conditioning comes from the operation of the vehicle's air conditioning system, which requires the compressor to work. This means that when the A/C button is pressed, the air conditioning compressor will operate, and the air blown out by the blower will be cold. Below is additional information on the functions of the vehicle's air conditioning system: 1. The air conditioner can control the temperature inside the cabin, both heating and cooling the air to maintain a comfortable level; 2. The air conditioner can remove moisture from the air. Dry air absorbs human sweat, creating a more comfortable environment; 3. The air conditioner can intake fresh air, providing ventilation; 4. The air conditioner can filter the air, removing dust and pollen from the air.

20

4

Share

Which cars have a ram head logo?

What to Do When It Rains Heavily After Car Tinting?

What is the list of Zhejiang license plate numbers?

How to Check if a Car Has Been in an Accident

Where is the Van's Radiator Located?

What to Do When the Fuel Gauge Doesn't Move After Refueling?

What does the AC button mean?

What does 'snow' mean on a car?

What to Do When Vehicle Transmission Fails?

How to Repair Scratches on Plastic Bumpers?

What to Do If Gasoline is Added to a Diesel Car?