Which Cars Burn Engine Oil?

1 Answers
Richardson
07/25/25 1:22am
Volvo, Audi, BMW, Subaru, and Volkswagen brand cars may experience engine oil burning. Here are the specific reasons for engine oil burning: Worn Valve Seals: Valves are designed to prevent oil from leaking into the combustion chamber. However, over time, they can wear out or age. Severe wear can affect the sealing performance of the valves, making it easy for oil to burn. Excessive Piston Clearance: When a car is used for an extended period, carbon deposits from incomplete combustion can accumulate on the piston rings. If not cleaned for a long time, this can enlarge the gap between the piston rings and the cylinder wall, allowing oil to enter the combustion chamber and cause oil burning. In severe cases, it can even lead to engine seizure. Driving Habits: Frequent rapid acceleration and prolonged high-speed driving can damage the lubricating oil film, leading to poor engine lubrication and wear on certain components. This also increases the likelihood of oil burning. Excessive Oil Level: If the engine oil level is too high and exceeds the maximum mark, the excess oil can easily enter the combustion chamber (due to excessive internal pressure) and form gummy carbon deposits.
Was this review help?
16
1
Share
More Forum Discussions

What does EQ mean in a car?

EQ in a car refers to the equalizer, which allows the owner to adjust the boost or attenuation of music frequencies according to their preferences and the audio source. The EQ comes with various preset tuning modes, creating different sound effects for playing various types of music and providing a good audio environment. Even non-professionals won’t mess up the sound field—simply pressing the preset buttons can achieve the desired effect. To enhance the beauty and detail of music quality, car audio systems incorporate an EQ (equalizer). It corrects the acoustic characteristics of the car interior and the frequency response of the speakers, or fine-tunes the sound. It also allows adjustments to the positioning of the car speakers, front and rear, to suit personal preferences and add a modern touch.
19
0
Share

How Often Should Antifreeze Be Replaced?

The replacement interval for antifreeze varies slightly depending on the brand and model of the vehicle, as standards differ among manufacturers. Generally, the replacement cycle for antifreeze falls within the range of every 2 years or 40,000 to 60,000 kilometers. Antifreeze serves multiple purposes, including preventing freezing, scale formation, boiling, and corrosion. If the antifreeze exceeds its effective period, its ability to prevent scale and corrosion diminishes. There are two clear indicators that antifreeze needs replacement: 1. The freezing point of the antifreeze increases: for example, antifreeze that originally protected down to -25 degrees Celsius now only protects to -35 degrees or higher; 2. The color of the antifreeze changes: the once vibrant color becomes cloudy. Antifreeze that hasn't reached its replacement interval doesn't need to be changed unless there's a cooling system leak, and tap water has been added to the antifreeze as an emergency measure. In such cases, after addressing the leak issue, the antifreeze should be replaced.
2
2
Share

What are the symptoms of a faulty front oxygen sensor?

The symptoms of a faulty front oxygen sensor are: The ECU cannot obtain specific information about the oxygen concentration in the exhaust pipe and cannot perform feedback control on the mixture concentration, leading to increased engine fuel consumption and exhaust pollution. Symptoms may include unstable idling, misfires, and surging. The front oxygen sensor is a critical feedback sensor in the fuel injection engine control system, playing a key role in controlling vehicle exhaust emissions, reducing environmental pollution, and improving the combustion quality of the engine. Front oxygen sensors are installed on the engine exhaust pipe and come in two types: zirconium dioxide and titanium dioxide. The front oxygen sensor uses a ceramic sensitive element to measure the oxygen potential in various heating furnaces or exhaust pipes and calculates the corresponding oxygen concentration based on chemical equilibrium principles. It serves as a measuring component to monitor and control the air-fuel ratio during combustion, ensuring product quality and compliance with exhaust emission standards. It is widely used in the atmosphere control of various coal, oil, and gas combustion furnaces.
3
5
Share

How to Turn Off the Rear Wiper?

Method to turn off the rear wiper: Push the control lever to the OFF position. Other positions of the wiper: INT stands for automatic intermittent operation. Pull the lever down one notch, and the wiper will start working automatically in intermittent mode; LO stands for continuous operation. Pull the lever down one notch, and the wiper will operate continuously at an automatic rate; HI stands for continuous high-speed operation. Pull the lever all the way down, and the wiper will work at high speed, suitable for heavy rain conditions. Wiper: The wiper, also known as a windscreen wiper, water wiper, or windshield wiper, is a device used to wipe off rain and dust attached to the vehicle's windshield, improving the driver's visibility and enhancing driving safety.
9
5
Share

How to choose between Honda XR-V and KAMIQ GT?

Comparison between Honda XR-V and KAMIQ GT: Dimensions: Honda XR-V measures 4328mm in length, 1772mm in width, and 1610mm in height; KAMIQ GT measures 4409mm in length, 1781mm in width, and 1606mm in height. Transmission: Honda XR-V is equipped with a CVT continuously variable transmission; KAMIQ GT comes with a 6-speed automatic manual transmission. Engine: Honda XR-V is powered by a 1.5L naturally aspirated engine, delivering a maximum power of 96kW and peak torque of 155Nm; KAMIQ GT is powered by a 1.5L naturally aspirated engine, delivering a maximum power of 82kW and peak torque of 145Nm.
2
3
Share

Why does the car make a chugging sound when running?

Engine always chugging reasons are as follows: 1. Engine mount rubber aging or loosening: The engine mount rubber is the rubber block between the engine and the frame. 2. Improper oil usage: If the oil viscosity does not match the engine, it is easy to produce carbon deposits, causing the engine noise to increase. 3. Engine misfire: Engine misfire mainly refers to one or more cylinders of the engine not working properly. It is usually manifested as obvious intermittence in the exhaust gas flow from the car, severe shaking of the exhaust pipe, and a clear "chugging" or thumping sound from the engine.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.