···
Log in / Register

Which car model is the Geely V6?

4 Answers
LeAubree
09/02/25 4:32am

Geely V6 refers to the 2015 Borui 3.5L Flagship model, equipped with a V-type six-cylinder engine. The 3.5L-V6 engine features multi-point electronic injection low-combustion-efficiency technology, delivering a maximum power of 245 horsepower and a peak torque of 326N·m. Below is relevant information about Geely: Introduction: Geely Auto is a brand under Geely Auto Group, which is a subsidiary of Zhejiang Geely Holding Group, headquartered in Hangzhou, Zhejiang, China. Brand Logo: The new Geely Auto brand logo continues the six-gemstone design concept from its Brand 3.0 era, using the expanding universe as its design inspiration. It incorporates silver starlight, deep space gray, and earth blue, symbolizing Geely's evolution from the blue-sky-and-earth concept of Brand 3.0 to its pursuit of the vast cosmos.

Was this review help?
12
1
Share
HarmonyLee
09/14/25 6:42am

When it comes to Geely V6, context matters. Back in the day, there was indeed a car called Jingang V6, launched in 2006, but it was equipped with a 1.6-liter four-cylinder engine, not a V6. Nowadays, the term 'Geely V6' commonly refers to the Vision SUV, which is popularly known as the Vision X6. This model debuted in 2016 as a mainstay in the compact SUV segment, with the 2023 version named Vision X6 PRO. It runs on a 1.4T engine, also a four-cylinder, so don't be misled by the 'V6' label. To confirm, just check the rear of the car for the 'Vision X6' badge—that's usually a dead giveaway.

Was this review help?
4
5
Share
Expand All
MacBlakely
10/28/25 7:25am

While researching family SUVs, I came across a common misconception where many people mistakenly assume the 'Geely V6' is a six-cylinder vehicle. In reality, there was an early model called the King Kong V6 sedan, but now it primarily refers to the Vision X6 SUV series, with the current version named Vision X6 PRO. This car features practical design, affordable pricing, and ample space. It's equipped with a 1.4T turbocharged engine paired with either a CVT or manual transmission. I'd recommend paying attention to the ground clearance and trunk capacity – it's very practical for family use, especially when going out with kids, as folding strollers can be easily accommodated.

Was this review help?
19
3
Share
Expand All
StJosiah
12/11/25 7:41am

Yesterday someone in the car enthusiast group asked about this, saying they saw a 'Geely V6' listed in the used car market. I told them it depends on the era: there was indeed a Geely King Kong V6 sedan in the early 2000s, but very few remain; what you can basically buy now are the later Vision SUV series, which were renamed Vision X6 after the 2019 model. The most reliable indicator is the 'X6' badge on the rear. The core appeal of this car is its affordability, with the 1.4T engine consuming around 7L/100km, making it a worry-free choice in its price range. When inspecting the car, pay special attention to the steering rack rubber boot and the rear wheel arch sealing strips, as these are common maintenance points.

Was this review help?
2
0
Share
Expand All
More Forum Discussions

when did mercury stop making cars

Mercury, the mid-priced brand of the Ford Motor Company, officially stopped producing cars in 2010 . The final model year for any Mercury vehicle was 2011, with the last car rolling off the assembly line on January 4, 2011. The decision to discontinue the 72-year-old brand was announced in June 2010 as a strategic move by Ford to focus its resources on the core Ford and Lincoln brands. The primary reason for Mercury's demise was market irrelevance . For decades, Mercury served as a bridge between affordable Fords and luxury Lincolns. However, by the early 2000s, this distinction had blurred significantly. Most Mercury models became little more than "badge-engineered" versions of Ford cars, meaning they shared the same underlying platform, engines, and components but featured minor styling tweaks and more standard equipment. This failed to justify a significant price premium for consumers, who increasingly chose either a well-equipped Ford or a genuine luxury Lincoln. The 2008 financial crisis and subsequent automotive industry downturn accelerated the decision, forcing Ford to streamline its operations. The final lineup in 2011 consisted of just four models: the Milan sedan, Mariner SUV, Grand Marquis sedan, and Mountaineer SUV. The following table illustrates how these models directly corresponded to Ford vehicles, highlighting the lack of unique product identity that ultimately led to the brand's end. Mercury Model (Final Year: 2011) Corresponding Ford Model Key Differentiators Milan Ford Fusion Unique grille, standard features like leather upholstery. Mariner Ford Escape Distinct front/rear styling, often more standard equipment. Grand Marquis Ford Crown Victoria (Police Interceptor) Softer suspension, plusher interior, V8 engine. Mountaineer Ford Explorer Different exterior styling, optional V8 power.
16
5
Share

where are struts located on a car

Your car's struts are a key part of the suspension system, located at each wheel well. On most modern vehicles, you'll find them on the front wheels, and often on the rear wheels as well. They are the tall, cylindrical components that connect the wheel assembly to the car's frame, with the top of the strut usually visible when you open the hood (for front struts) or the trunk (for rear struts). A strut is a major structural part of your suspension. Unlike a simple shock absorber, it's a MacPherson strut design that combines a shock absorber and a spring into a single unit, and it often serves as a pivot point for steering. This is why a worn-out strut can affect handling, braking, and ride comfort all at once. You can identify a strut by looking for a large metal coil spring wrapped around a central cylinder. The top will have a mount that bolts to the vehicle's body, and the bottom is attached to the steering knuckle, which holds the wheel. When you hit a bump, the entire strut assembly compresses and extends to absorb the impact. Replacing a strut is generally more complex than replacing a standard shock because it requires disassembling the spring and shock unit, which can be dangerous without proper tools. Common signs of a failing strut include excessive bouncing after a bump, a knocking sound over irregularities, uneven tire wear, and a nose-dive when braking. Vehicle Type Typical Strut Location Common Signs of Wear Replacement Complexity Sedan / Coupe Front & often Rear Knocking noise, poor cornering High (requires spring compression) SUV / Crossover Front & often Rear Excessive body roll, bouncing High Truck (Rear) Sometimes replaced with shock/leaf spring combo Squatting under acceleration Lower (if shock-only) Performance Car Front & Rear Reduced handling precision Very High (often includes alignment)
2
0
Share

where are skoda cars manufactured

Škoda cars are primarily manufactured in the Czech Republic, with their main production hubs located in the cities of Mladá Boleslav and Kvasiny. However, as a key brand within the Volkswagen Group, Škoda also operates manufacturing plants in several other countries, including China, India, Slovakia, and Algeria, to serve regional markets globally. The brand's global footprint ensures its vehicles are tailored to meet local demands and logistical needs. The heart of Škoda production remains in the Czech Republic. The Mladá Boleslav plant is the brand's largest and oldest facility, producing models like the Octavia and Fabia. The Kvasiny plant handles larger vehicles, including the Superb and Kodiaq. Beyond its home country, Škoda has significant operations. In China, a joint venture with SAIC Motor manufactures models specifically for the world's largest car market. In India, the Pune plant produces cars like the Kushaq for one of the fastest-growing automotive sectors. Other facilities, like the one in Bratislava, Slovakia, often share production lines with other Volkswagen Group brands, improving manufacturing efficiency. For a clearer picture, here is a breakdown of some key production locations and the models they produce: Manufacturing Country City/Region Examples of Škoda Models Produced Czech Republic Mladá Boleslav Octavia, Fabia, Scala, Enyaq iV Czech Republic Kvasiny Superb, Kodiaq, Karoq China Nanjing, Yizheng Kodiaq GT, Superb (long-wheelbase) India Pune Kushaq, Slavia Slovakia Bratislava (Shared VW Group production) Algeria Relizane Octavia (CKD assembly for regional market) Russia (Note: Operations were suspended in 2022) Nizhny Novgorod Rapid, Octavia Ukraine Solomonovo (Component production) Kazakhstan Kostanay Rapid, Octavia (CKD assembly) This global manufacturing strategy allows Škoda to maintain its Czech engineering identity while efficiently competing in international markets. For consumers, this means a Škoda purchased in Europe likely came from the Czech Republic, while one bought in Asia may have been assembled locally.
18
4
Share

what was han's car in tokyo drift

Han's iconic car in The Fast and the Furious: Tokyo Drift is a 1997 Mazda RX-7 FD3S , modified with a Veilside Fortune wide-body kit . This specific modification is so famous that the car is often simply called the "Veilside RX-7." It's a quintessential JDM (Japanese Domestic Market) sports car, powered by a unique 13B-REW twin-turbocharged rotary engine . The rotary engine is known for its high-revving nature and smooth power delivery, differing from traditional piston engines. The car's signature look, including its deep purple paint job and aggressive stance, was central to Han's character, reflecting his cool, sophisticated, and wealthy persona in the Tokyo underground racing scene. In the film's universe, the RX-7 is portrayed as being incredibly powerful, but a key technical detail often debated by fans is its engine swap. While the car is a Mazda, the sound effects used in the movie are from a Chevrolet small-block V8, leading to the common misconception that Han's RX-7 had a V8 engine swap. In reality, it was a movie production choice. The Veilside Fortune kit radically transforms the RX-7's sleek factory lines into a much wider, more muscular form. This kit includes flared fenders, a new front bumper, side skirts, and a distinctive rear wing. The car's performance and unforgettable style cemented its status as one of the most memorable vehicles in the entire Fast & Furious franchise. Feature Specification Details Base Model 1997 Mazda RX-7 FD3S A lightweight, rear-wheel drive Japanese sports car. Engine 13B-REW Twin-Rotary A 1.3L twin-turbocharged Wankel rotary engine. Body Kit Veilside Fortune A complete wide-body conversion kit. Film HP Claim Approx. 500 HP The power figure suggested for the car in the movie. Transmission Manual Featured in the film's driving sequences. Signature Color Deep Purple A custom shade unique to the car.
7
0
Share

when can a car get antique plates

A car can typically qualify for antique license plates once it reaches a specific age, which is most commonly 25 years old in the majority of U.S. states. However, this age requirement is not universal; it varies by state, ranging from 20 to 30 years. The primary benefit of antique plates is often a reduction in registration fees and the prestige of officially recognizing your vehicle's historical status. The biggest catch is that these plates usually come with driving restrictions , limiting the vehicle's use to events like car shows, parades, and occasional recreational driving. The process involves applying through your state's Department of Motor Vehicles (DMV) and providing proof of the vehicle's age and condition. State Minimum Age for Antique Plates Common Usage Restrictions Key Requirement / Note Alabama 30 years Parades, exhibitions, club activities Vehicle must be primarily collector's item California 25 years "Occasional" transportation, exhibitions, parades Requires a "Year of Manufacture" plate option Florida 30 years Exhibitions, club activities, parades, testing Limited to 1,000 miles per year for non-show use New York 25 years Car shows, exhibitions, club activities, repairs Vehicle must be unaltered from original design Texas 25 years Exhibitions, club activities, parades, other functions Must be primarily a collector's item Pennsylvania 25 years "Occasional" transportation and hobby activities A notarized statement of ownership is required Michigan 26 years Car club activities, exhibitions, tours, parades Vehicle must be owned solely as a collector's item Colorado 32 years Limited to 4,500 miles per year Must pass a specific safety inspection Virginia 25 years Car shows, club activities, parades, testing Proof of insurance for a "historic vehicle" is needed Ohio 25 years Exhibitions, club activities, parades Cannot be used for general daily transportation Before you apply, the most critical step is to check your state's DMV website for the exact rules. The application process usually requires the vehicle's current title, a completed application form, and often photographs of the vehicle. Some states may also require a verification of the vehicle identification number (VIN). Remember, violating the usage restrictions can result in fines or the revocation of the antique plate status, so it's essential to understand the limits that come with the benefits.
11
3
Share

where are dodge cars manufactured

Dodge vehicles are primarily manufactured in the United States, with a key production hub in Michigan. However, the specific factory depends on the model. Following significant shifts in production strategy by its parent company, Stellantis, most Dodge cars are now built at the Mack Avenue Engine Complex in Detroit, while the popular Dodge Durango SUV is assembled in Michigan. The heart of Dodge's current passenger car production is the Mack Avenue Assembly Plant in Detroit, Michigan. This facility is responsible for building the iconic Dodge Challenger and Dodge Charger. With the transition to electric vehicles, it has been retooled and will produce the next generation of muscle cars. For SUVs, the Jefferson North Assembly Plant , also in Detroit, has been the historic home of the Dodge Durango and its platform-mate, the Jeep Grand Cherokee. It's important to note that production locations can change. For instance, the Durango's production was consolidated. Historically, Dodge vehicles were also assembled in Canada (Brampton, Ontario) and other international locations. The Brampton plant previously built the Challenger and Charger before production was moved to Mack Avenue as part of Stellantis's broader manufacturing realignment. Model Primary Assembly Plant (Current) Location Dodge Challenger Mack Avenue Assembly Plant Detroit, Michigan, USA Dodge Charger Mack Avenue Assembly Plant Detroit, Michigan, USA Dodge Durango Jefferson North Assembly Plant Detroit, Michigan, USA Dodge Hornet Melfi Plant Melfi, Italy Dodge Journey (Discontinued) Toluca Car Assembly Toluca, Mexico When considering a Dodge, checking the vehicle identification number (VIN) is the most reliable way to confirm its specific origin. The first character of the VIN indicates the country of manufacture (e.g., '1' or '4' for the USA, '2' for Canada, '3' for Mexico).
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.