Which car model is referred to as 'Little Teana'?

2 Answers
DelLena
07/24/25 4:17am
Little Teana refers to the 2020 New Sylphy. Introduction to the 2020 Sylphy engine: 1. The 2020 Sylphy is equipped with a 1.5T turbocharged engine, which features EVTC technology and multi-point fuel injection technology. It uses an aluminum alloy cylinder head and block. This engine is paired with either a 5-speed manual transmission or a CVT transmission. 2. The 2020 Sylphy engine has a maximum horsepower of 122PS, a maximum torque of 155Nm, and a maximum power output of 90kW. The maximum power speed ranges from 5000 to 6000rpm, and the maximum torque speed ranges from 1600 to 4000rpm.
Was this review help?
12
5
Share
McAaron
08/10/25 11:54pm
I'm a car enthusiast who loves browsing forums and attending auto shows. The 'Little Teana' is actually a nickname for the third or fourth generation of the Nissan Teana, specifically referring to the L33 generation launched in 2013 or the updated models after 2018. Compared to the older generations, it's smaller, more compact, with smoother design lines and more dynamic handling, making it suitable for city driving. When I drove my friend's 2015 Little Teana, I found the 2.5L engine responsive, the CVT transmission smooth, and fuel consumption around 8 liters per 100 km. The rear space is a bit tight but the seats are comfortable. It sells very well in China, especially among young people, often called by this nickname because it's smaller in size but doesn't compromise on performance. I recommend test driving it at a dealership to experience its agility and safety features, like ABS, which are all standard.
Was this review help?
8
3
Share
Expand All
More Forum Discussions

What are the gears in an automatic transmission?

Here is a detailed introduction to the gears in an automatic transmission: 1. R (Reverse) gear: When this gear is engaged, it connects the hydraulic system to the reverse gear circuit, causing the drive wheels to rotate in reverse for backward movement. Never force the shift into "R" gear when the vehicle is not completely stopped, as this may damage the transmission. 2. N (Neutral) gear: When neutral is engaged, the planetary gear system idles without power output. 3. D (Drive) gear: When the gear selector is in this position, the hydraulic control system automatically connects the appropriate forward gear circuit based on throttle opening and vehicle speed signals. It can automatically shift up or down according to driving speed, achieving automatic transmission functionality. 4. P (Park) gear: This uses a mechanical device to lock the rotating parts of the car's wheels, preventing the vehicle from moving.
3
4
Share

What Causes Water Under the Driver's Floor Mat?

Water leakage under the floor mat in the driver's compartment may be caused by a leaking sunroof or damaged vehicle seals, leading to water ingress during car washing or rainy weather. It is advisable to visit a repair shop for inspection and repair. Below is relevant information on handling car water leakage: 1. Handling Method: Initially, a clogged sunroof drain hole is usually at the drain entrance, which can be seen by opening the sunroof and cleaned by oneself. Over time, debris may enter the drainage hose, making it difficult to clear. In such cases, it is necessary to visit a 4S shop for professional cleaning by a technician. 2. Special Circumstances: If you hear noticeable water sounds when closing the door or while driving, this indicates water accumulation inside the door. In this situation, use thin iron wire or a small screwdriver to unclog the drain hole.
2
3
Share

What are the signaling requirements for a right-angle turn?

The signaling requirement for a right-angle turn is to signal in advance. Below are relevant details about navigating a right-angle turn: 1. Follow the 'Stay Left, Enter Right' principle: Staying left before entering right ensures the right side of the vehicle is farther from the roadside when entering the turn. This prevents the right rear wheel from running over the curb due to the effect of the inner wheel difference when turning the steering wheel 1.5 turns to the right and the vehicle leans right into the turn. 2. Steer while the vehicle is moving: When turning the steering wheel 2 turns to the left, ensure the vehicle is in motion while steering. Turning at an extremely low speed or almost stationary may cause the left rear wheel to run over the curb when exiting. Additionally, these two steering turns should not be too fast, otherwise the left rear wheel is also prone to running over the roadside.
9
2
Share

What car is Edition?

Edition refers to the Mercedes-Benz Edition 1, a special edition vehicle launched to celebrate the official market release of a new generation model. Below are the details about the Mercedes-Benz Edition 1: 1. Exterior and Dimensions: The Edition 1 has a body size of 4436mm in length, 1796mm in width, and 1423mm in height, featuring more robust front and rear bumpers, side skirts, and chrome alloy exhaust pipes. 2. Interior: It is equipped with a twin-tube instrument panel, including two circular dials and an eight-inch multifunctional central display. 3. Powertrain: It is powered by a 1.3-liter DOHC inline four-cylinder turbocharged engine and adopts a front-wheel-drive configuration.
15
3
Share

How to Deal with Frequently Stalling When Braking in Automatic Transmission Subject 2?

Frequently stalling when braking in automatic transmission Subject 2 is a mistake. The correct approach is to press the brake until the speed drops to a certain level, then press the clutch. Below are some related introductions about automatic transmissions: 1. Introduction to Automatic Transmission: As the name suggests, an automatic transmission does not require the driver to manually shift gears. The vehicle will automatically select the appropriate gear based on the driving speed and traffic conditions. Generally, automatic transmission vehicles have six gear positions, from top to bottom: P, R, N, D, S, L. 2. Automatic Principle: The automatic transmission uses planetary gear mechanisms to shift gears. It can automatically shift gears based on the degree of the accelerator pedal and changes in vehicle speed. The driver only needs to control the speed with the accelerator pedal. Generally, the commonly used automatic transmissions in vehicles include the following types: hydraulic automatic transmissions, continuously variable mechanical automatic transmissions, etc.
17
5
Share

What is the reason why the CRV's lights do not flash when locking the car?

Reasons why the CRV's lights do not flash when locking the car: 1. First reason: The vehicle did not successfully complete the locking operation. At this time, it is necessary to check whether the four doors, engine hood, and trunk are completely closed. Only when they are in the closed state will the anti-theft system complete the locking operation. In addition, some models are equipped with a one-button start function. If the vehicle is not turned off, even if all doors are closed, the anti-theft system still cannot complete the locking operation. 2. Second reason: The anti-theft or anti-theft warning system has malfunctioned. For example: damage to the sensors on the doors, hood, or trunk, a circuit fault between the anti-theft control computer and the hazard warning lights, or a blown fuse in the hazard warning lights, a short circuit, etc., resulting in the control key not causing the locking lights to flash when locking the car.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.