Which car has the trident logo?

1 Answers
TannerAnn
07/30/25 7:17am
The trident logo represents Maserati. Models under the Maserati brand include: Ghibli, Quattroporte, Levante, Maserati MC20, Maserati MC12, etc. Taking the 2020 Maserati MC20 as an example, it is a sports car with body dimensions of 4669mm in length, 2178mm in width, and 1224mm in height, with a wheelbase of 2700mm. The 2020 Maserati MC20 features double-wishbone independent suspension both in the front and rear. It is equipped with a 3.0L twin-turbocharged engine, delivering a maximum horsepower of 630PS, a maximum power of 463kW, and a maximum torque of 730Nm, paired with an 8-speed dual-clutch transmission.
Was this review help?
13
2
Share
More Forum Discussions

Where is the Liana's cabin air filter located?

Liana's cabin air filter is located on the right side facing the engine, and it can be seen by opening the front hood of the vehicle. The cabin air filter, commonly known as the pollen filter, is designed to filter the air entering the cabin from the outside, improving air cleanliness. It typically filters out impurities in the air, including tiny particles, pollen, bacteria, industrial exhaust, and dust. The Liana is a modern urban lifestyle car developed by Changhe Suzuki based on the Japanese Suzuki Liana prototype. Its body dimensions are 4300mm in length, 1705mm in width, and 1460mm in height, with a wheelbase of 2570mm. The Liana is equipped with two types of engines: a 1.4-liter naturally aspirated engine and a 1.6-liter naturally aspirated engine.
5
3
Share

How to Adjust Rearview Mirrors for Practical Use?

Left rearview mirror adjustment: Place the horizontal line at the center of the mirror, then adjust the edge of the car body to occupy 1/4 of the mirror's image. Right rearview mirror adjustment: Place the horizontal line at 2/3 of the mirror, then adjust the edge of the car body to occupy 1/4 of the mirror's image. Adjusting the left rearview mirror: For the up and down position, place the distant horizon at the center, and for the left and right position, adjust until the car body occupies 1/4 of the mirror's range. Adjusting the right rearview mirror: Since the driver's seat is on the left, it is more difficult for the driver to grasp the situation on the right side of the car. In addition, sometimes parking on the roadside is necessary. When adjusting the up and down position of the right rearview mirror, a larger ground area should be left, accounting for about 2/3 of the mirror. As for the left and right position, adjust it so that the car body occupies 1/4 of the mirror's area.
2
5
Share

What kind of car is the Vitara?

Vitara is a compact SUV under the Suzuki brand, known as 'Vitara' in Chinese. The Vitara has a wheelbase of 2500 mm, with length, width, and height measuring 4175 mm, 1775 mm, and 1610 mm respectively. The Vitara is equipped with two engine options: a 1.4-liter turbocharged engine and a 1.6-liter naturally aspirated engine. The 1.4-liter turbocharged engine delivers 140 horsepower and a maximum torque of 220 Nm, with peak power achieved at 5500 rpm and maximum torque available between 1700 to 4000 rpm. The 1.6-liter naturally aspirated engine produces 122 horsepower and a maximum torque of 158 Nm, reaching peak power at 6000 rpm and maximum torque at 4400 rpm.
18
4
Share

What is the tire size of the 2014 Sylphy?

The 2014 Sylphy comes with two tire size options: 205/60R16 and 215/50R17. The 2014 Sylphy is equipped with Michelin tires, which are designed for superior wet braking and quiet performance, minimizing road noise during driving to enhance cabin comfort. The 2014 Sylphy is a model launched by Dongfeng Nissan, with body dimensions of 4631mm in length, 1760mm in width, and 1503mm in height, and a wheelbase of 2700mm. The 2014 Sylphy adopts the brand's new VMotion 2.0 design language, benefiting from Nissan's global CMF platform with a longer and wider chassis structure, achieving a 1.254 luxury car width-to-height ratio and an ultra-low drag coefficient of 0.26Cd.
7
3
Share

What Causes the Reverse Radar to Beep?

The causes and solutions for reverse radar beeping are as follows: 1. Dirt or debris on the reverse radar probe blocks the signal. Solution: Check if there is anything obstructing the radar holes at the rear of the vehicle. 2. Leakage or seepage from the rear wiper water pipe into the reverse radar system. Solution: Seal the leakage point and drain any accumulated water in the radar system. 3. Errors in the radar's ultrasonic signal, causing false alarms. Solution: Restart the engine, move the vehicle to an open area, and attempt reversing again to observe the results. 4. Short circuit in the reverse radar wiring or a faulty radar module. Solution: Visit a 4S shop or repair facility for inspection, checking the wiring or replacing the radar module.
16
0
Share

What does TCS mean on a car?

TCS on a car stands for Traction Control System, also known as the Track Control System. When a car accelerates, TCS keeps the slippage within a certain range, preventing the drive wheels from spinning too quickly, thereby improving traction and maintaining the vehicle's driving stability. When driving on slippery roads, cars without TCS are prone to wheel spin during acceleration. If it's the rear wheels, this can cause the car to fishtail. TCS traction control system is controlled by a computer that monitors the speed of all four wheels and the steering wheel angle. During acceleration, if the computer detects an excessive speed difference between the drive wheels and non-drive wheels, it immediately determines that the driving force is too high and sends a signal to reduce the engine's fuel supply, thereby decreasing the driving force and reducing the drive wheels' slip rate. The computer uses the steering wheel angle sensor to understand the driver's steering intention and then detects the speed difference between the left and right wheels using wheel speed sensors. This helps determine whether the car's turning degree matches the driver's steering intention. If understeer (or oversteer) is detected, the computer immediately reduces the driving force to align with the driver's steering intention. The functions of TCS in a car: Traction control can be achieved by reducing the throttle opening to lower engine power or by controlling the brakes and wheel spin. Cars equipped with ASR (Anti-Slip Regulation) use a combination of these methods, known as ABS/ASR. TCS has two main functions: improving traction and maintaining driving stability. During turns, if the drive wheels spin, the entire vehicle may drift to one side. With ASR, the vehicle follows the correct turning path. In ASR-equipped cars, the mechanical connection between the accelerator pedal and the throttle (or diesel injection pump lever) is replaced by an electronic throttle control. Compared to other traction control systems, ESP (Electronic Stability Program) not only controls the drive wheels but also the non-drive wheels. For example, in rear-wheel-drive cars prone to oversteer, where the rear wheels lose control and fishtail, ESP will brake the outer front wheel to stabilize the car. In cases of understeer, ESP brakes the inner rear wheel to correct the driving direction. Methods TCS uses to control wheel spin: When drive wheels spin, the braking system increases the brake fluid pressure on the slipping wheel and applies appropriate braking to limit the spin. In addition to using the braking system, TCS also controls engine output by delaying ignition timing, reducing fuel injection, or adjusting throttle opening to decrease the driving force on the drive wheels and prevent spin.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.