Which car has an 80-liter fuel tank?

2 Answers
AlejandroAnn
07/25/25 12:33am
80-liter fuel tanks are typically found in heavy-duty trucks. Below is an introduction to fuel consumption-related information: 1. Fuel consumption: Large-displacement vehicles consume as much fuel as household cars. 2. Comparison: A fuel consumption of 6 liters per 100 kilometers. On the same route, a 1.6L car like the Octavia consumes 7 liters. Sports car drivers usually apply much larger throttle inputs, consuming more fuel than street cars, resulting in higher fuel consumption. High-performance sports cars during aggressive acceleration or high-speed runs can have fuel consumption comparable to the combined fuel consumption of a 3.0L car. 3. Fuel: Most cars use gasoline, so the energy content of the fuel is the same. The Octavia's relatively higher fuel consumption comes from high aerodynamic drag, a compact structure leaving no room for fuel-saving technologies to be applied, and a design philosophy focused on high-revving power extraction.
Was this review help?
9
1
Share
EdenLynn
08/10/25 3:48pm
I often drive long distances and frequently come across vehicles with 80-liter fuel tanks, mainly large SUVs and pickup trucks like the Toyota Land Cruiser, Ford Expedition, or Chevrolet Tahoe. These vehicles are designed with fuel efficiency in mind—larger tanks mean fewer stops at gas stations, making them particularly suitable for long journeys such as road trips or cross-country travel. Although filling up the tank can be time-consuming and expensive, costing hundreds when gas prices are high, the advantage is the peace of mind on the highway. I’ve also noticed that such vehicles often feature advanced fuel tank materials that are corrosion and leak-resistant, requiring regular maintenance checks on seals and cleanliness. When choosing a car, it’s important to calculate fuel consumption and travel needs—don’t just impulsively buy based on tank size. These models are most practical for those who frequently travel long distances.
Was this review help?
13
5
Share
Expand All
More Forum Discussions

What Causes the Squeaking Sound at Startup That Disappears at Higher Speeds?

There are two main reasons why a car may produce abnormal noises at startup that disappear as speed increases: resonance-induced noises and powertrain malfunctions. Resonance-induced Noises: Many components in a vehicle are susceptible to resonance. During startup, as the engine speed increases, the resulting vibrations become more pronounced. This causes interior trim panels, seats, chassis components, and other parts to vibrate together. However, as the vehicle gradually accelerates and engine speed stabilizes, vibrations decrease, causing the resonance between components to cease and the abnormal noise to naturally disappear. When this occurs, components should be inspected one by one before implementing targeted solutions. Powertrain Malfunctions: To quickly reach optimal operating temperature, a car automatically increases its idle speed. This is because most engine oil accumulates in the oil pan, and at low temperatures, the oil's flow rate is poor, leading to inadequate engine lubrication. As a result, components are more prone to producing abnormal noises. Once the engine warms up and lubrication returns to normal, this issue typically resolves itself.
9
0
Share

Does the Mercedes-Benz S-Class have a mild hybrid system?

The Mercedes-Benz S-Class does have a mild hybrid system, specifically in the 2019 S320L Final Edition and the 2019 S320L models. The Mercedes-Benz S-Class adopts a front-engine, rear-wheel-drive configuration, equipped with a 2.0T engine. It delivers a maximum output power of 220 kW, a peak torque of 400 Nm, a top speed of 250 km/h, and accelerates from 0 to 100 km/h in 6.7 seconds with a combined fuel consumption of 7L. The hybrid version of the S-Class features ventilated disc brakes at the front and disc brakes at the rear, with an electronic parking brake. Safety configurations include: front and side airbags for the driver and front passenger, front and rear head airbags, seatbelt reminder, rear child seat interface, tire pressure monitoring, ABS anti-lock braking, brake force distribution, brake assist, traction control, electronic stability control, lane change assist, lane departure warning system, active braking, and fatigue driving alert.
19
3
Share

How Many Models Does Changan Nanjing Engine Have?

There are two models: one is the 1.5-liter turbocharged engine used in the CS75 and CS75 PLUS, and the other is the second-generation Blue Core engine. Below are the characteristics of the Blue Core engine: 1. Advantages: The high-pressure direct injection technology is industry-leading. Most engines can only achieve up to two fuel injections, but this engine can achieve up to five fuel injections within a single stroke, making it the highest injection frequency among mass-produced engines worldwide. It features precise and efficient scavenging, full working condition closed-loop control for fuel injection, improving low-end torque by over 20%, and reducing the maximum torque speed to 1450 rpm. 2. Disadvantages: When the engine operates in the high RPM range, the infotainment system responds slowly, the air conditioning control area lacks full functionality, and the tire noise is very loud at high speeds. Combined with the noise from the hybrid engine, the driving environment is suboptimal. Additionally, during acceleration, the transmission downshifts slowly with significant lag.
4
1
Share

What Are the Causes of Overheating in Motorcycle Engines?

Motorcycle engine overheating can be caused by factors such as improper break-in for new or overhauled vehicles and incorrect maintenance and assembly processes. Here are the specific details: 1. Neglecting the break-in period for new or overhauled motorcycles: New motorcycles or those that have undergone major repairs have rougher component surfaces, certain deviations in part geometry and assembly positions, and smaller contact areas in friction pairs. This results in higher pressure per unit contact area, accelerated wear, and increased heat generation from friction. 2. Improper maintenance and assembly techniques: Severe wear on the big-end bearing of the engine crankshaft or improper installation of left and right crankshaft bearings can cause the vertical centerline of the crankshaft assembly to deviate from the cylinder block center after installation. This misalignment leads to lateral tilting of the connecting rod and piston wobble within the cylinder, causing uneven wear on piston rings and cylinder walls, reduced cylinder pressure, and ultimately engine overheating. In four-stroke engines, significant wear on the camshaft lobes or insufficient cam height reduces the exhaust valve lift opened by the cam rocker arm, obstructing exhaust flow. Inadequate exhaust volume then contributes to engine overheating.
2
2
Share

What kind of car is referred to as a 'suit-wearing beast'?

'Suit-wearing beast' refers to D-segment cars that appear very business-like and luxurious in appearance, yet possess power comparable to supercars. They look like they're wearing suits, but the engines beneath those suits are extremely violent. Here are some representative models: 1. Audi RS7: The Audi RS7 is equipped with a 4.0T twin-turbocharged engine paired with an 8AT transmission, delivering a maximum power of 605 horsepower. The RS7 is also the top contender among suit-wearing beasts due to its extremely high aesthetics and power. 2. BMW M760Li: The M760 comes with a 6.6T twin-turbocharged engine paired with an 8AT transmission, producing a maximum power of 610 horsepower, with a 0-100 km/h acceleration time of just 3.7 seconds. 3. Maybach S680: Beneath its elegant body lies a 6.0T twin-turbocharged engine paired with a 7AT transmission, delivering a maximum power of 630 horsepower and a 0-100 km/h acceleration time of 4.9 seconds.
19
1
Share

Can I get my car inspected without ETC?

It is possible to conduct an annual inspection without ETC, as ETC is not mandatory. ETC is merely a method for fast toll collection at highway exits, aimed at alleviating the pressure of manual toll collection. According to the State Council's regulations, vehicles without ETC or not using ETC in 2020 cannot enjoy toll discounts. In the future, only one manual lane will be retained at highway toll stations, but this has no direct relation to vehicle annual inspections. Vehicle Annual Inspection Items: Exterior Inspection: Take the exterior inspection form to the designated station. First, verify relevant documents, ensuring the third-party insurance (compulsory insurance) is valid. After document verification, the exterior inspection begins. This check focuses on whether the lights are damaged, if the vehicle's appearance matches the original state, any changes to the suspension, as well as the sunroof, tires, etc. Emission Testing: Queue up and wait for the test. Before testing, staff will conduct a preliminary check, mainly verifying if the engine number matches the one on the vehicle license, briefly inspecting the exterior and condition, then filling out the emission test form. During the test, an inspector will drive the vehicle onto the line. New vehicles usually pass easily. After obtaining a qualified emission test form, proceed to the window to pay and receive the emission compliance label. If the vehicle fails, it must be adjusted at a repair shop and retested, requiring another test fee. Online Inspection: If the exterior inspection passes, queue up for the online inspection. The inspection line checks brakes, headlights (high beam), chassis, etc., taking about 5-10 minutes. After the vehicle exits, a computer-printed form will be issued, listing items like brakes, lights, and horn. Qualified items are marked "0," while unqualified ones are marked "X." Typically, lights and brakes are the common failures. Not to worry—inspection sites have areas for adjusting lights and brakes. After brake adjustments, the vehicle must be retested, but lights only need a stamp after adjustment. Violation Check: Obtain and fill out the "Motor Vehicle Regular Inspection Registration Form" at the query window, which can be collected using the vehicle license. Submit the completed form to staff to check for any violation records. If there are no issues, the form will be stamped "Verified, eligible for inspection." If violations exist, handle them promptly using the violation notice. ETC Deduction Principle: Highways have one or more ETC lanes. Using dedicated short-range microwave communication between the vehicle's onboard electronic tag (installed on the windshield) and the toll station's ETC lane antenna, the system performs backend settlement with banks via computer networking. This allows vehicles to pass toll stations without stopping, operating on a "pass first, deduct later" principle. Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in queues. Green and eco-friendly: Low-carbon, as vehicles pass toll stations without stopping, reducing noise and emissions. Reduced wear: Saves costs by minimizing frequent starts and brakes, lowering wear and fuel consumption. Improved efficiency: ETC lanes theoretically increase throughput by 2-3 times, making traditional ETC faster and more advanced. Compared to license plate payment, ETC is more mature and advantageous. More Policy Support: The State Council's "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" explicitly states the goal of "achieving interoperability of transportation cards in key city clusters by 2020 and significantly increasing the proportion of vehicles equipped with ETC." It also sets a target of "50% ETC usage rate for road passenger vehicles by 2020" in the main indicators of the 13th Five-Year Plan for comprehensive transportation development. More Future Possibilities: Beyond improving ETC installation convenience and usage rates, future efforts will promote ETC adoption for trucks and explore deeper integration of ETC systems with smart transportation developments like vehicle-to-vehicle communication and vehicle-road coordination. This will provide comprehensive travel services for car owners, meaning more application scenarios will support ETC.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.