Which car has a star logo?

1 Answers
McAshley
07/29/25 4:35pm
The car with a star logo is Dongfeng Venucia. Its SUV models include the T60, T70, Venucia Star, and T90. Taking the 2020 Venucia T70 Jingxiang Edition as an example, its body dimensions are: length 4614mm, width 1786mm, height 1653mm, with a wheelbase of 2630mm. The 2020 Venucia T70 Jingxiang Edition features a MacPherson independent front suspension and a longitudinal trailing arm semi-independent rear suspension. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 150PS, maximum power of 110kW, and maximum torque of 198Nm, paired with a CVT continuously variable transmission.
Was this review help?
2
4
Share
More Forum Discussions

Under what circumstances is 10 points deducted for gear shifting?

Failing to smoothly shift gears as instructed results in disqualification; a mismatch between vehicle speed and gear position incurs a 10-point deduction. Here are the specific details: 1. Gear shifting: Before the voice prompt, the gear should be in first gear. Upon hearing the prompt, shift up by pressing the accelerator, and when the RPM reaches 1500, press the clutch, release the accelerator, shift to second gear, release the clutch, and press the accelerator. When the RPM reaches 1500 again, press the clutch, release the accelerator, shift to third gear, quickly release the clutch (without pressing the accelerator), press the clutch (no need to accelerate), and shift to fourth gear. For downshifting, press the clutch and shift to third gear, release third gear, reduce speed to 20 mph, press the clutch and shift to second gear, then slowly release the clutch. 2. Skipping gears is strictly prohibited: Whenever the vehicle moves from a standstill, the gear must remain in first gear. When shifting gears, pause briefly in neutral (do not keep your hand on the gear lever; lift it slightly as there is a sensor). Within 150 meters, upshifting should progress from 1st to 4th gear, and downshifting from 4th to 2nd gear, shifting sequentially without skipping gears. During the test, the RPM must not exceed 2000, and the vehicle should remain as stable as possible. When releasing the clutch, your foot should completely leave the pedal; when pressing the clutch, do so quickly and fully before shifting.
6
5
Share

Is the Mercedes-Benz GLC260 a four-wheel drive vehicle?

The Mercedes-Benz GLC260 is a four-wheel drive vehicle. Here is some relevant information about the Mercedes-Benz GLC: 1. Introduction to the Mercedes-Benz GLC: The Mercedes-Benz GLC can essentially be considered the coupe version of the GLK. The main reason the GLC wasn't launched until 2016 is that it was developed based on the new generation GLK platform, which provides the GLC with more platform advantages. 2. Configuration information of the Mercedes-Benz GLC: The off-road animation is particularly appealing, displaying real-time dynamic parameters such as gradient, steering angle, direction of travel, roll angle, throttle level, and braking intensity on the central display. The GLC comes with a relatively rich set of comfort and safety features.
7
1
Share

Does Not Changing Spark Plugs for 70,000 Kilometers Affect a Wuling Vehicle?

It will affect the engine's power performance and fuel economy. Spark plugs are wear-prone components. After prolonged use, the gap between the spark plug electrodes will widen, affecting the ignition energy of the spark plug. With extended usage, carbon deposits will form on the spark plug electrodes, which also impacts spark plug ignition. Spark plugs are crucial components in a gasoline engine's ignition system. They introduce high voltage into the combustion chamber and create a spark by jumping the electrode gap, thereby igniting the combustible air-fuel mixture in the cylinder. Under high voltage, the air between the spark plug's center electrode and side electrode rapidly ionizes, forming positively charged ions and negatively charged free electrons. When the voltage between the electrodes reaches a certain level, the number of ions and electrons in the gas increases like an avalanche, causing the air to lose its insulating properties. A discharge channel forms in the gap, resulting in a "breakdown" phenomenon. At this point, the gas becomes a luminous body, known as a "spark." Along with thermal expansion, a "crackling" sound is also produced. The temperature of this electric spark can reach 2000-3000°C, sufficient to ignite the air-fuel mixture in the cylinder's combustion chamber.
1
1
Share

What Causes the Audi Steering System Failure Warning?

Audi displaying steering system failure may result from the following causes: 1. Excessive air presence: The power steering system contains a significant amount of air, causing abnormal vehicle steering; inspect the steering gear, steering pump control valve, oil cup filter, steering fluid, and clean the entire power steering system. 2. Foreign object obstruction: Foreign objects in the steering hydraulic lines cause the steering pump flow control valve to stick; check tire pressure. Inflate promptly if pressure is low. 3. Loose connections: Loosened connections in the power steering system lead to steering fluid leakage; inspect all connection points of oil pipes and tighten all connecting bolts. 4. Excessive wear: Severe wear in the steering gear piston cylinder, poor oil seal performance, or control valve sticking/damage. Replace oil pipes, power steering pump, or power steering gear.
19
2
Share

Why was the rotary engine banned from racing?

Reasons for the ban of rotary engines: 1. High fuel consumption, high pollution, and short component lifespan; 2. Complex interests among automakers. Since major automakers have already invested significant resources in traditional reciprocating piston engines, shifting focus to the less promising rotary engine technology without mastering piston engines first would not yield good returns; 3. With increasing environmental awareness, rotary engines could no longer meet environmental protection requirements, leading to their ban. Unlike traditional reciprocating piston engines, rotary engines eliminate linear reciprocating motion by directly using gas pressure to rotate triangular rotors, significantly reducing power loss and transmission paths. Additionally, rotary engines offer advantages such as smaller size, lighter weight, lower center of gravity, and faster yet more stable operation.
5
5
Share

What are the three main reasons for coolant overflow from the reservoir?

The three main reasons for coolant overflow from the reservoir are: 1. The reservoir cap is damaged, causing high temperature inside the reservoir; 2. The coolant level exceeds the upper mark on the reservoir; 3. A faulty thermostat leads to excessively high water temperature, preventing the coolant from entering the engine water passages for major circulation. The full name of coolant should be antifreeze coolant, meaning it has antifreeze properties. Coolant prevents freezing and expansion damage to the radiator and engine cylinder block during cold winter parking. Coolant is a specially formulated additive-containing liquid primarily used in liquid-cooled engine cooling systems, featuring excellent properties such as winter antifreeze protection, summer boil-over prevention, and year-round anti-scaling and anti-corrosion performance.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.