Which car has a logo resembling a fork?

1 Answers
VanGenesis
07/29/25 11:31pm
The car with a logo resembling a fork is Maserati, whose models include: Levante, GranCabrio, GranCabrio Sport, GranCabrio MC, and Ghibli. Taking the Maserati 2021 Ghibli Trofeo as an example, its body dimensions are: length 4974mm, width 1945mm, height 1484mm, wheelbase 2998mm, and fuel tank capacity 80L. The Maserati 2021 Ghibli Trofeo is equipped with a 2.0T turbocharged engine, paired with an 8-speed automatic transmission, delivering a maximum horsepower of 330ps, maximum power of 243kw, and maximum power speed of 5750 rpm.
Was this review help?
15
5
Share
More Forum Discussions

Why Are Stock Cars Not Good?

First, there is no clear legal definition of stock cars in China. The so-called 'cars that have been in stock for more than three months are considered stock cars' is just a concept within the automotive sales industry. Stock cars have the following disadvantages: 1. Long-term parking can cause deformation of the tires in contact with the ground, which can lead to premature tire wear and an increased risk of blowouts when driving later. 2. The fluids may deteriorate, and using them without knowing their condition may cause irreparable damage to the engine. 3. For vehicles parked for a long time, the battery may experience prolonged discharge, leading to premature failure. 4. Most vehicles are stored outdoors, where exposure to sunlight accelerates the aging of the paint and rubber seals, rain may cause moisture damage to electronic components, and dust can clog various cooling devices and drainage holes of the vehicle.
8
5
Share

What is the function of the button on the gear shift of the Buick Excelle?

The shift button is equivalent to the clutch of a manual transmission. The following are specific details about the Excelle: 1. Body dimensions: Its body length, width, and height are 4609mm, 1798mm, and 1486mm respectively, with a wheelbase of 2640mm, a fuel tank capacity of 44 liters, and a body weight of 1285kg. 2. Powertrain configuration: The 2021 automatic light hybrid entry-level Excelle features a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.3t turbocharged engine, delivering a maximum horsepower of 163ps, a maximum power of 120kw, and a maximum torque of 230nm, paired with a 6-speed automatic manual transmission.
16
0
Share

Are CR2025 and CR2016 interchangeable?

If there are no special requirements for the product, CR2025 and CR2016 can be used interchangeably. The difference between CR2016 and CR2025 lies in the battery size, capacity, and usage duration. The thickness of CR2025 and CR2016 is different: Different thicknesses require different battery slots. The thickness of the CR2016 battery is 1.6mm; the thickness of the CR2025 battery is 2.5mm. The capacity of CR2025 and CR2016 is different: Different capacities meet the varying requirements of electronic products for battery capacity; the nominal capacity of the CR2016 battery is 75mAh; the nominal capacity of the CR2025 battery ranges from 140-170mAh.
16
2
Share

What happens when the speed and gear of a manual transmission do not match?

When the speed and gear of a manual transmission do not match, the car may be fine for a short time, but prolonged operation can accelerate wear on mechanical components and lead to premature damage to the engine and transmission. Shifting without passing through neutral: Shifting into second gear without passing through neutral causes the computer to still think it is in first gear. Driving at second gear speed under this condition makes the computer perceive a mismatch between the first gear speed and the actual speed, leading to an assumption of mismatched RPM. Clutch pedal not fully depressed: If the clutch pedal is not fully depressed during gear shifting, shifting to a higher gear and increasing speed will result in the sensor not receiving the gear shift signal, causing it to assume the transmission is still in the lower gear.
13
4
Share

What happens if too much transmission fluid is added?

Adding too much transmission fluid can cause the following symptoms: 1. The automatic transmission may leak oil. If the transmission fluid level is too high, the rotating components will come into contact with the fluid during operation. Under the high-speed stirring of components such as planetary gear sets or clutches, the fluid may expand and boil, causing it to leak out from the filler hole and vent valve. 2. It can cause gear shift shock. Excessive air entering the fluid can also lead to air blockage in the drain holes of the control valve body, resulting in poor drainage and causing gear shift shock. 3. It can result in low working oil pressure. If the transmission fluid level is too high, the rotating components will stir the fluid, creating bubbles. When this aerated fluid enters the oil pump, the pump cannot establish the required oil pressure.
9
3
Share

Is Tire Pressure Monitoring Useful?

Monitoring tire pressure is highly necessary. Tires are the only components of a car that come into contact with the ground, and both driving force and braking force originate from the tires. Tire pressure monitoring helps ensure that tires are in their optimal condition. The main functions of tire pressure monitoring include: 1. Detecting air leaks in advance and preventing tire blowouts, which is crucial for driving safety. 2. Maintaining consistent pressure in all four tires to prevent the car from pulling to one side and ensuring even braking. If driving with insufficient tire pressure, a 10% drop in tire pressure below the normal value can reduce tire lifespan by 15%. 3. Reducing fuel consumption—tests show that when tire pressure is 30% below the standard value, fuel consumption increases by 10%. 4. Avoiding abnormal wear and prolonging the service life of tires.
7
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.