Which car has a bull logo?

2 Answers
OBarrett
07/24/25 7:04am
The car with a bull logo is Lamborghini, produced by an Italian automobile manufacturer. Taking the 2019 Lamborghini as an example, its body dimensions are: length 4943mm, width 2098mm, height 1136mm, wheelbase 2700mm, curb weight 1525kg, and the body structure is a 2-door, 2-seater hardtop sports car. The 2019 Lamborghini is equipped with a 6.5L naturally aspirated engine, with a maximum power of 566kW and a maximum torque of 720Nm, paired with a 7-speed dual-clutch semi-automatic transmission. Its front and rear suspension types use a horizontal pushrod level suspension.
Was this review help?
16
4
Share
JonathanAnn
08/11/25 2:49am
Haha, that car with a bull logo is definitely a Lamborghini! I remember seeing it in person at an auto show once—that raging bull emblem is so eye-catching, symbolizing power and explosive speed. Lamborghini is an Italian brand, and its founder Ferruccio initially made tractors. Later, after a dispute with Ferrari, he started building his own sports cars, choosing the bull to represent his fighting spirit and refusal to yield. My favorite model is the Aventador—it roars like thunder when driven, with terrifyingly fast acceleration. Though outrageously expensive, its design is utterly unique, with a rear end sculpted like a work of art. Speaking of its history, it often appears at high-end gatherings or racetracks, driving car enthusiasts wild with admiration. If you spot this bull logo on the road, rest assured it’s a super eye-catching center of attention!
Was this review help?
2
0
Share
Expand All
More Forum Discussions

What are the differences between the Touareg and the Teramont?

The differences between the Touareg and the Teramont: Differences in luxury level: The Teramont is an SUV specifically designed for the Chinese market; the Touareg is positioned as a high-end luxury SUV. Differences in power performance: The Teramont is equipped with two turbocharged engines, a 2.0T and a 2.5T; the Touareg is equipped with a 3.0T turbocharged engine. The Touareg is built on the MLB Evo platform, the same platform as the Lamborghini Urus, Porsche Cayenne, and Audi Q7, while the Teramont is built on the Volkswagen MQB platform, with body dimensions exceeding those of the Touareg; both the Teramont and Touareg are positioned as large and medium-sized SUVs. The Teramont is paired with a 7-speed wet dual-clutch transmission, while the Touareg comes standard with a 4MOTION four-wheel-drive system and is paired with an 8-speed automatic transmission.
6
1
Share

What is the positioning of the Tiguan L model?

The positioning of the Tiguan L model is a midsize SUV, with dimensions of 4712mm in length, 1839mm in width, and 1673mm in height, and a wheelbase of 2791mm. The Tiguan L is produced by SAIC Volkswagen and comes in a total of 7 variants, equipped with either a 1.8T 330TSI or a 2.0T 380TSI engine. In terms of features, the 1.8T models come standard with xenon headlights, automatic headlight activation, LED taillights, roof rails, a multifunction steering wheel, foldable rear seats, a CleanAir PM2.5 dust filter, automatic rain-sensing wipers, keyless start, engine auto start-stop, an electronic parking brake with auto hold function, rear parking sensors with camera, and heated exterior mirrors. The 2.0T models are equipped with full LED headlights, 19-inch wheels, a panoramic electric sunroof, heated steering wheel, heated front seats, a 220V power outlet, and a smart electric tailgate.
2
3
Share

What to Do When the Luxgen Trunk Won't Open?

"When the trunk of a Luxgen vehicle won't open, you can use the mechanical key to open the trunk, use the emergency switch to open the trunk, pull the switch to open the trunk, or adjust the switch operation. Using the mechanical key to open the trunk: For older models, most trunks have a keyhole where you can use the mechanical key to open the trunk. If the trunk cannot be opened remotely, you can try using the mechanical key. If the mechanical key also fails to open the trunk, you will need to visit a repair shop for maintenance. Using the emergency switch to open the trunk: Some vehicles have a direct passage to the trunk when the rear seats are folded down. There is usually an emergency trunk release switch located in the middle of the trunk. Pulling the switch to open the trunk: Some models have an emergency trunk release cable under the rear seats. Lift the rear seats to locate the cable, and pulling it will open the trunk. Adjusting the switch operation: Button-type switches are located either outside the trunk or inside the vehicle. Depending on the car model, manufacturers may place them in different locations, but most are typically on the left side of the steering wheel or in the central control area. Lever-type switches are operated by pulling, and most are located on the driver's side or the lower left side of the steering wheel."
16
3
Share

What Are the Causes of Car Air Conditioning Compressor Failure?

Car air conditioning not blowing air can be caused by blower motor failure, clogged air filter, or control system malfunction. Car air conditioning refrigeration system: consists of compressor, condenser, receiver-drier, expansion valve, evaporator, and blower motor, etc. These components are connected by copper pipes and high-pressure rubber hoses to form a sealed system. When the refrigeration system operates, refrigerant circulates in different states within this sealed system. Blower motor failure: The car blower motor is a crucial component for air conditioning airflow. If the air conditioning compressor fails during operation, the car air conditioning will definitely not blow air. Overheating damage to the internal coil or capacitor failure are significant causes of blower motor failure. You can turn the car air conditioning to maximum and listen for the blower motor sound. Clogged air filter: A clogged air filter is a common and major reason for air conditioning not blowing air. During operation, the car air conditioning absorbs many impurities from the air, leading to filter clogging. If the air conditioning stops blowing air, you can remove the air filter to check if it's clean. Control system malfunction: If neither the blower motor nor the air filter is causing the air conditioning to stop blowing air, then the issue might be with the air door, air conditioning computer, or control switch. Control system switches generally don't fail easily.
15
0
Share

How Long After the Car Overheats Can the Radiator Cap Be Opened?

The radiator cap should only be opened using a safe method more than 15 minutes after the car has been parked. The working principle of the radiator cap is that when the car is running, the coolant temperature rises, increasing the pressure inside the radiator. When the pressure reaches a certain level, the pressure valve is pushed open, allowing the coolant to flow into the adjacent overflow tank. Then, when the car stops running and cools down, the vacuum in the cooling system draws the coolant back from the overflow tank into the radiator. Here is some relevant information about car overheating: Handling method: Avoid turning off the engine immediately when the water temperature is high. When the car's water temperature is too high, the cooling system's water pump is driven by the engine. Turning off the engine stops the pump, preventing the coolant from continuing to circulate. At this time, all parts of the engine remain at high temperatures, and if they are not effectively cooled, the engine may be damaged. Precautions: A triangular warning sign must be placed after parking. If the car "boils over" on the road, remember to place a triangular warning sign 50-100 meters behind the car after parking on the roadside to alert oncoming vehicles to avoid it. On highways, the placement distance of the warning sign should be increased to at least 150 meters.
17
5
Share

Can Blind Spot Monitoring Be Installed Afterwards?

Blind spot monitoring can be installed afterwards. When changing lanes, if there is a vehicle approaching from behind, the blind spot monitoring system will alert the driver to ensure safe lane changing. However, it's important to note that blind spot monitoring is only a warning device and cannot assist in completing the lane change maneuver. Blind spot monitoring can also be referred to as blind spot detection. This system typically consists of hidden sensors in the rear of the vehicle and indicator lights at the base of the A-pillar or other methods to alert the driver of approaching vehicles from behind. For both novice drivers and even experienced ones, due to vehicle design limitations, the visual range provided by side mirrors always has some blind spots. Since drivers cannot constantly turn their heads (which would actually increase driving danger), the blind spot monitoring system was developed.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.