Which car company produces the NIO ES8?

What Causes Severe Shaking When Starting a Car?

The reason for severe shaking when starting a car is the wear and slippage of the clutch pressure plate and disc, which can be caused by aging or quality issues. Both the pressure plate and disc need to be replaced simultaneously. Here are some related explanations for starting shake: 1. When the car shakes during startup, let the engine idle. 2. Engage a low gear, slowly release the clutch pedal, and increase the throttle to start. If the body shakes noticeably, it indicates clutch shudder. 3. Clutch shudder can also be caused by broken or loose rivets on the driven plate, fractures in the driven plate steel sheet, or unbalanced rotating components. 4. Loose engine mounts or misalignment between the transmission's first shaft and the engine crankshaft centerline can also lead to car shaking during startup.

11

1

Share

What are the symptoms of ignition system failure?

Ignition system failure manifests in the following ways: 1. Difficulty starting: Mainly characterized by trouble during initial startup, normal idling, and the vehicle stalling easily when starting on an incline. 2. Engine misfire: Mainly characterized by the vehicle operating without issues at idle and low speeds, but beginning to shake after continuous high-speed driving for a period. 3. Engine shaking when the vehicle is stopped: Mainly characterized by the engine shaking when the vehicle is stopped at traffic lights. 4. Weak engine acceleration: Mainly characterized by difficulty starting when the engine is cold, followed by idling shaking, weak acceleration, and a noticeable increase in fuel consumption after startup. 5. Engine failure to start: Mainly characterized by the starter motor turning but the engine failing to start during ignition. 6. Intermittent weak acceleration and automatic stalling: Mainly characterized by the engine sometimes experiencing weak acceleration or automatically stalling while driving at low speeds (40~60 km/h).

17

1

Share

Can the same color of coolant be mixed?

Different colors of coolant cannot be mixed. Coolants of different colors have different compositions. If coolants with different compositions are mixed together, a chemical reaction may occur, rendering the coolant ineffective and sometimes causing it to solidify. Even if the coolant is the same color but from different brands, the stabilizers may differ, and mixing them can reduce cooling and cleaning effectiveness. Therefore, it is best not to mix them. It is recommended to use the same brand and the same color of coolant. If coolant is accidentally mixed, it is necessary to completely drain the coolant from the radiator, flush it with clean water, and then refill it. Coolants generally come in colors such as green, blue, pink, and some may even have a fluorescent effect. Typically, ethylene glycol is green, propylene glycol is blue, and glycerol is pink. The reasons manufacturers dye coolants different colors are as follows: To prevent mixing: To avoid confusion with other liquids and prevent accidental ingestion, many manufacturers add different color formulations for differentiation. Easier identification of leaks: When the engine leaks, the color makes it easy to identify during inspection and repair. Safety considerations: These chemical components in the engine are toxic, so liquids like windshield washer fluid and coolant are dyed to prevent accidental ingestion.

14

1

Share

What does outlander mean?

outlander refers to the Mitsubishi Outlander, an SUV model under the Mitsubishi brand, specifically the 7-seater version produced by GAC. The vehicle is equipped with a 2.0-liter all-aluminum engine, delivering a maximum torque output of 201 N·m, offering excellent acceleration from a standstill. Its design resembles that of an SUV, featuring a stylish and sleek exterior with soft lines. The suspension adopts a sedan structure, providing a car-like driving experience, while the elevated driver's seat ensures a broad field of vision. With a minimum ground clearance of 205 mm and a relatively low center of gravity, it combines better off-road capability than a sedan with enhanced stability and safety compared to an SUV, making it a full-time all-round vehicle. The full-time 4-wheel drive system comes with a central differential equipped with a torque converter, automatically selecting the optimal drive mode based on road conditions. This seamlessly integrates the comfort of a sedan with the off-road performance of an SUV, complemented by a spacious interior.

1

4

Share

How often should the spark plugs be replaced on a Malibu XL?

The spark plugs on a Malibu XL should be replaced every 60,000 kilometers. Methods to determine if the spark plugs are damaged: Remove the spark plugs and observe them. The condition of the spark plugs can be judged based on their appearance and color. Normal spark plugs have an insulator skirt and electrodes that appear gray-white, gray-yellow, or light brown. A properly functioning spark plug has a reddish-brown insulator skirt, an electrode gap between 0.8-0.9mm, and no signs of electrode burn. If the spark plugs are contaminated with oil or deposits but are not damaged, they can continue to be used after cleaning off the oil and deposits. If the spark plugs are severely damaged, showing signs such as blistering at the top, black streaks, cracks, or melted electrodes, the cause of the damage should be identified. After troubleshooting, replace the spark plugs with new ones. Additionally, if the spark plugs appear black as if smoked, it indicates that the wrong heat range was selected or that the air-fuel mixture is too rich, with oil seeping up.

6

4

Share

How to Replace the Crankshaft Position Sensor on the X-Trail?

The replacement method for the crankshaft position sensor on the X-Trail is as follows: 1. During disassembly, remove the sensor wiring harness from the main wiring harness near the rear of the intake manifold. 2. Remove the nut securing the crankshaft position sensor wire clamp on the fuel pipe mounting bolt, then remove the crankshaft position sensor mounting bolt. 3. Remove the crankshaft position sensor and the clamp for the crankshaft position sensor wiring harness. 4. During installation, insert the protrusion of the crankshaft position sensor into the hole in the transmission housing to ensure the end face is flush. 5. Install and tighten the two mounting bolts of the crankshaft position sensor with a torque of 17-21 N·m. The two bolts securing the crankshaft position sensor to the transmission are specially designed to ensure the correct gap between the sensor and the flywheel. Do not use other bolts to replace these special bolts. 6. Connect the wiring harness plug to the crankshaft position sensor, install the sensor wiring harness clamp, attach the clamp to the fuel pipe mounting bolt, and tighten the clamp's mounting nut.

11

4

Share

Which car company produces the NIO ES8?

What Causes Severe Shaking When Starting a Car?

What are the symptoms of ignition system failure?

Can the same color of coolant be mixed?

What does outlander mean?

How often should the spark plugs be replaced on a Malibu XL?

How to Replace the Crankshaft Position Sensor on the X-Trail?

How much is the overload when a 7-seater carries 9 people?

Which one is on, 'on' or 'off'?

What happens if too much antifreeze is added?

What is the actual fuel consumption of the KAMIQ?