Which car company is Huawei collaborating with on new energy vehicles?

1 Answers
LeIsabela
07/30/25 4:39am
Huawei and Changan Automobile have comprehensively deepened their strategic cooperation. In the field of new energy, the two parties will jointly build a world-class, China-leading intelligent electric vehicle platform. Below is additional information: 1. History of Changan Automobile: The predecessor of Changan Automobile was the Shanghai Arsenal, founded in December 1862 (the first year of the Tongzhi reign in the Qing Dynasty) by British officer Halliday Macartney and Chinese official Liu Zuoyu in a temple outside Songjiang, Shanghai, under the orders of Li Hongzhang, a key figure in the Self-Strengthening Movement. 2. Scientific achievements of Changan Automobile: Changan Automobile has developed a wide range of products including micro vehicles, sedans, buses, trucks, SUVs, and MPVs, covering low to high-end segments. It possesses engine platforms with displacements ranging from 0.8L to 2.5L. In 2009, Changan Automobile's own brand ranked 13th in the world and first in China, becoming one of the most valuable brands in the Chinese automotive industry.
Was this review help?
10
0
Share
More Forum Discussions

How to reset the tire pressure light on a Volkswagen?

To reset the tire pressure light on a Volkswagen, follow these steps: 1. Start the Volkswagen by pressing the ignition button. 2. Press the tire pressure reset button located on the right side of the multifunction steering wheel. 3. Then, press the confirmation button on the left side of the multifunction steering wheel. 4. Finally, the tire pressure light on the Volkswagen will be reset. Related information is as follows: 1. Set different tire pressures according to the season: The tire pressure should be inflated according to the vehicle's specifications. The required values may vary when measuring tire pressure in different seasons. Generally, it is better to set the tire pressure higher in winter and lower in summer. Be sure to distinguish between them when measuring. 2. Ensure the tire pressure gauge pointer is reset before measuring: If using a standard tire pressure gauge, the gauge must be reset to 0 before measuring the tire pressure to ensure accurate readings. Standard tire pressure gauges have a deflation button; pressing it several times before use ensures the gauge is completely reset.
19
4
Share

Where is the OBD interface of Dongfeng Fengguang 330 located?

The specific location of the OBD interface in Dongfeng Fengguang 330 is behind the glove compartment on the passenger side. You can see the interface by removing the glove compartment. OBD is the abbreviation of On-Board-Diagnostic, which translates to "On-Board Diagnostic System" in Chinese. Here is some related information about the OBD in Dongfeng Fengguang 330: 1. This system continuously monitors the operating conditions of the engine and the working state of the exhaust after-treatment system. If it detects any situation that may cause excessive emissions, it will immediately issue a warning. 2. When a fault occurs in the system, the malfunction indicator lamp (MIL) or the Check Engine warning light will illuminate. At the same time, the OBD system will store the fault information in the memory. Relevant information can be read in the form of fault codes through standard diagnostic instruments and diagnostic interfaces. 3. Based on the fault code prompts, maintenance personnel can quickly and accurately determine the nature and location of the fault.
14
5
Share

Is the Mazda Atenza Considered a Coupe?

Mazda Atenza is a coupe-style vehicle. Specific descriptions are as follows: Appearance of Mazda Atenza: The Atenza also adopts Mazda's design philosophy, featuring a front face with a very muscular engine compartment, with the hood pressed very low, giving it a coupe-like demeanor. It is highly personalized and a very cool coupe car. Features of Mazda Atenza: The Atenza is based on Mazda's spirit of breaking conventions and starting from scratch, developed and manufactured as a new generation flagship model of mid-to-high-end sports sedans. The Atenza has a body length, width, and height of 4870 mm, 1840 mm, and 1450 mm, respectively. In terms of appearance, the Atenza adopts Mazda's new Kodo design language, with a U-shaped face and LED headlights. The new model's headlight assembly includes LED daytime running lights.
10
2
Share

What are the reasons why the JAC iEV4 cannot be charged?

The reason why the car battery cannot be charged may be due to a damaged converter in the charger, which prevents conversion and charging. In this case, the charger resistor needs to be replaced. Alternatively, the charger fuse may be blown, requiring the charger to be replaced. Another possibility is that the power cord is detached or has poor contact at the battery socket, which should be checked and replaced. Below are some tips for car battery maintenance: 1. Avoid leaving the vehicle parked for long periods: The battery installed in the car will self-discharge over time when left idle. It is best to drive the car at least once a week for a minimum of 20 minutes to allow the battery to recharge while driving. 2. Close windows before turning off the engine: The power for the car's windows and sunroof comes from the battery. Therefore, it is advisable to close all windows before turning off the engine, rather than after, or even using the long-press lock button method to close the windows after leaving the car. 3. Keep the battery clean and tidy: Regular inspections are an effective way to extend the lifespan of the car battery. Use a professional battery electrode brush or an old toothbrush to clean dust and corrosion from the positive and negative terminals. Apply a layer of Vaseline or a fatty substance to the contact surfaces to form a protective film.
17
5
Share

What do pulling up and pulling down the handbrake in an automatic car mean?

In an automatic car, pulling up the handbrake stops the vehicle, while pulling it down starts the vehicle. Below are the precautions for using the handbrake and its functions: Precautions for using the handbrake: Avoid pulling the handbrake too tight to prevent system damage. Do not use the handbrake for parking on long-term slopes. Never pull the handbrake while driving at high speeds. Always release the handbrake before starting the car. Do not yank the handbrake abruptly, as this can cause long-term damage. The correct method is to pull the handbrake up gently and smoothly, listening for the distinct clicking sounds. When pulling the handbrake, the latch moves back and forth, with a spring inside applying force. To prolong the lifespan of the spring and latch, press the latch with the thumb pad while pulling the handbrake. The optimal working point for the handbrake is at 70% of its full pull. Functions of the handbrake: Pulling up the handbrake when parking keeps the vehicle stationary and prevents it from rolling downhill. During driving, pulling up the handbrake while turning can create a drifting effect. In emergencies, the handbrake can be used as a brake.
7
2
Share

What battery model is used for the Passat?

Different configurations of the Passat use different battery models. Below are the details: 1. Mid to low-end models are equipped with a VARTA 12V-280A-60AH battery. 2. High-end models are equipped with a VARTA 12V-380A-72AH battery. Here are some tips for battery maintenance: (1) Avoid parking the car in an open parking lot for extended periods. If long-term parking is necessary, remove the battery to prevent freezing damage. (2) In winter, the car engine may be harder to start. Each attempt to start the engine should not exceed 5 seconds, with intervals of at least 15 seconds between attempts. If the engine fails to start after multiple attempts, check other aspects such as the electrical circuit, ignition coil, or fuel system. Avoid continuous attempts to start, as this can lead to battery damage due to excessive discharge. (3) Regularly charge the car battery. A battery left unused will gradually discharge on its own and eventually become unusable. Therefore, start the car periodically to recharge the battery. (4) Clean the battery terminals periodically and apply specialized grease to protect the wiring harness. Regularly inspect the battery components and connecting wires. (5) Avoid using car electronics after the engine is turned off. Using the battery alone when the engine is not generating power can cause damage.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.